Choose a country or area to see content specific to your location
尋找感興趣的產品?
-
-
Accelerate Advanced Package & 3DIC Designs
Design, model, and validate complex 3D interconnect architectures with a powerful standalone design environment.
-
Scale AI Compute. Simplify Validation.
Automate transmitter and receiver validation across next-generation I/O, memory, and fabric interfaces.
-
End-to-End Validation for AI Data Center
Strengthen 1.6T network reliability for AI-scale workloads from transceivers to interconnects.
-
Take On Complex MIMO Signals
Pair Keysight VSA software with the new XA5 signal analyzer for advanced visualization, demodulation, and analysis — start your 30-day trial today.
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Accelerate Semiconductor Innovation
Explore end-to-end workflows spanning IC design, validation, wafer test, and photonics.
-
Trade In Before You Buy New
Save up to 50% on our latest instruments with eligible Keysight or competitor trade-ins.
-
-
The Right Connection Makes the Measurement
Maximize accuracy and performance with precision accessories engineered for Keysight instruments.
Trade In Before You Buy NewSave up to 50% on our latest instruments with eligible Keysight or competitor trade-ins.
Scale to Hundreds of Channels. Keep Measurements in Sync.Four channels per 1U of rack space, up to 1 GHz bandwidth, and multi-oscilloscope synchronization.
-
-
Purpose-built solutions engineered for the design and test challenges unique to your industry.
Use Cases mapped to every stage of your product lifecycle, from design through operations.
Success Stories
Nokia + Keysight: AI Network Designs at Scale -
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
FeaturedHands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Learning Hub
AI TechnologyExplore methodologies, test strategies, and technical resources for designing, validating, and scaling AI systems and networks.
-
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 8 of 8
No Filter available
No Filter available
No Filter available
Rack Mount Kit for RP7900 Regenerative Power System
有了機架安裝套件，您可輕易將 RP7900 系列再生電源系統安裝入 19 吋 EIA 機櫃中。
有了機架安裝套件，您可輕易將 RP7900 系列再生電源系統安裝入 19 吋 EIA 機櫃中。
Rack Mount Kit for RP7900 Regenerative Power System
RP7909A
有了機架安裝套件，您可輕易將 RP7900 系列再生電源系統安裝入 19 吋 EIA 機櫃中。
有了 RP7909A 機架安裝套件，您可輕易將 RP7900 系列再生電源系統安裝入 19 吋 EIA 機櫃中。此安裝套件包括滑軌及上架邊條（沒有把手）。
此機架安裝套件與下列機型相容：RP7951A - 53A、RP7961A - 63A。
Cable, 4m, DB37(m) to DB37(m) for BT2152B
BT2181A 和 BT2182A 支援 16 個量測通道；連接到 BT2152B 背板的 DB37（母頭）。
BT2181A 和 BT2182A 支援 16 個量測通道；連接到 BT2152B 背板的 DB37（母頭）。
Cable, 4m, DB37(m) to DB37(m) for BT2152B
BT2182A
BT2181A 和 BT2182A 支援 16 個量測通道；連接到 BT2152B 背板的 DB37（母頭）。
BT2181A 和 BT2182A 支援 16 個量測通道；連接到 BT2152B 背板的 DB37（母頭）。纜線有 18 對的雙絞線，在雙絞線套件周圍具有屏蔽與編包屏蔽；BT2152B 僅用其中 16 對來進行電流量測。編包屏蔽與纜線兩端的連接器連接。連接器接腳為機器製作。
Breakout Board
分線板，DB37（母頭）至螺絲端子
分線板，DB37（母頭）至螺絲端子
Breakout Board
BT2180A
分線板，DB37（母頭）至螺絲端子
適用於 16 個量測通道。一個 DB37（母頭）連接器，可連接 BT2152B 的 16 個通道。DB37（母頭）在分線板上連接到兩個 16-pin 螺絲端子連接器（一個連結所有通道的 "+" 極端子，另一個連接所有通道的 "–" 極端子）。 利用螺絲端子連接器，您可將雙絞線（16-30 AWG）連接至待測電池或電池夾具。螺絲端子間隔為 4 mm。分線板上有支腳，可在機台上使用；另外還有 4 個安裝孔，用於固定和/或將分線板安裝在測試夾具或機櫃內。
深入了解是德科技自放電量測解決方案
Verification Fixture for BT2152B
測試夾具為一片安裝有兩個 DB37（公頭）連接器的 PCB，可連接至 BT2152B 背板的兩個連接器。
測試夾具為一片安裝有兩個 DB37（公頭）連接器的 PCB，可連接至 BT2152B 背板的兩個連接器。
Verification Fixture for BT2152B
BT2183A
測試夾具為一片安裝有兩個 DB37（公頭）連接器的 PCB，可連接至 BT2152B 背板的兩個連接器。
測試夾具為一片安裝有兩個 DB37（公頭）連接器的 PCB，可連接至 BT2152B 背板的兩個連接器。可將所有 32 個量測通道都連接到 DMM 的一對香蕉端子，用來進行 BT2152B 驗證測試。
Rack Mount Kit without handles for BT2152B
Rack Mount Kit without handles for BT2152B
適用於 BT2152B 的無把手上架套件
Add-on Box – MCS Inlet for EVSE Test
Validate Megawatt Charging Systems with the SL2630A MCS Inlet Add-on Box for EVSE communication, interoperability, and performance testing.
Validate Megawatt Charging Systems with the SL2630A MCS Inlet Add-on Box for EVSE communication, interoperability, and performance testing.
Add-on Box – MCS Inlet for EVSE Test
SL2630A
Validate Megawatt Charging Systems with the SL2630A MCS Inlet Add-on Box for EVSE communication, interoperability, and performance testing.
Extend your Charging Discovery System for MCS testing
The SL2630A Add-on Box provides a fully instrumented MCS vehicle inlet for EVSE-side testing. It enables charging infrastructure manufacturers to validate communication behavior, interoperability, and charging performance of MCS-compliant chargers in a controlled and repeatable environment. The solution supports communication-only verification as well as combined communication and power testing up to 400 A and, when used with high-power CDS configurations, up to 800 A.
Highlights:
- MCS vehicle inlet interface for EVSE validation
- Supports CE and ID signaling according to IEC 61851-23-3
- Compatible with SL1040A Portable CDS and SL1047A High-Power CDS
- Enables communication-only in combination with SL1550A EV – EVSE Charging Communication Interface Tester, standard-power, and high-power MCS test scenarios
Cable, 2 m
BT2181A 2-metre DB37(m) to DB37(m) cable for 16 measurement channels; connects to BT2152B rear panel DB37(f).
BT2181A 2-metre DB37(m) to DB37(m) cable for 16 measurement channels; connects to BT2152B rear panel DB37(f).
Cable, 2 m
BT2181A
BT2181A 2-metre DB37(m) to DB37(m) cable for 16 measurement channels; connects to BT2152B rear panel DB37(f).
The Keysight BT2181A cable (2 m) for 16 measurement channels connects to the DB37(f) on Keysight's BT2152B rear panel. The cable has 18 pairs of twisted wires with shield and braided shield around bundle of twisted pairs; use the 16 pairs for current measurement with the BT2152B. Braid connects to the connector housing on both ends of the cable with machined connector pins.
Learn more about Keysight self-discharge measurement solutions.
Add-on Box – MCS Charging Cable for EV Test
Extend your Charging Discovery System with the SL2640A MCS Cable Box for EV communication and performance testing.
Extend your Charging Discovery System with the SL2640A MCS Cable Box for EV communication and performance testing.
Add-on Box – MCS Charging Cable for EV Test
SL2640A
Extend your Charging Discovery System with the SL2640A MCS Cable Box for EV communication and performance testing.
Extend your Charging Discovery System for EV-side MCS testing
The SL2640A Add-on Box extends the Charging Discovery System with an instrumented MCS charging cable and connector interface for EV-side testing. It supports development, interoperability, and performance validation of MCS-enabled electric vehicles and charging controllers. Engineers can perform communication-only testing during early development stages or execute combined communication and charging performance testing in fully integrated laboratory environments.
Highlights:
- Instrumented MCS charging cable for EV-side validation
- Supports CE and ID signal measurement and logging
- Communication testing using Automotive Ethernet and Power Line Communication (PLC) technologies
- Compatible with SL1040A Portable CDS and SL1047A High-Power CDS
- Enables communication-only in combination with SL1550A EV – EVSE Charging Communication Interface Tester, standard-power, and high-power MCS test scenarios
