Choose a country or area to see content specific to your location
尋找感興趣的產品?
Bridging design and physical testing to evaluate drop, impact, shock, and vibration compliance before hardware exists.
Unlock your free upgrade to the next bandwidth tier.
Strengthen 1.6T network reliability for AI-scale workloads from transceivers to interconnects.
Pair Keysight VSA software with the new XA5 signal analyzer for advanced visualization, demodulation, and analysis — start your 30-day trial today.
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
Explore end-to-end workflows spanning IC design, validation, wafer test, and photonics.
Explore curated support plans, prioritized to keep you innovating at speed.
Maximize accuracy and performance with precision accessories engineered for Keysight instruments.
Explore dual-channel and ultra-wideband signal analysis for demanding RF workflows.
Get faster, clearer insights with our new multicore, 12-bit oscilloscope up to 33 GHz. Trade in your old oscilloscope and get credit toward a new XR8.
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
Hands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Success Stories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
No Filter available
No Filter available
No Filter available
N7026A
Measure down to 1 mA/div, giving you a much more accurate view of low-level signals.
Keysight N7026A 是 150 MHz 頻寬的主動式電流探棒,可用於 InfiniiVision 與 Infiniium 示波器。它具有寬廣且平坦的頻寬(直流至 150 MHz)、更低的雜訊(250 µArms)和更寬的輸入範圍(高達連續 30Arms 或非連續 40A 峰值)。如此一來,您可量測低至 1 mA/div 的電流,讓您能更準確地查看低位準信號。
如欲使用鉤鉗式電流探棒進行準確的量測,消磁並消除偏移誤差至關重要。探棒上的消磁和校驗鈕讓您能輕鬆去除任何殘餘的磁性和不想要的直流偏移。您可透過 InfiniiVision 和 Infiniium 介面直接為探棒供電,以量測峰值高達 15 A 的電流,或是透過外部交流轉接器供電,以量測峰值高達 40 A 的電流。
Keysight N7026A 非常適合擷取高頻數位電路、IC、馬達控制器、交換式電源供應器、變頻器,以及電流放大器驅動電感負載等裝置經常會出現的暫態電流訊號。
10072A
密間距探量 IC,具有十個 IC 夾與兩個連接至 10080 系列探棒的雙導線轉接器。
Keysight 10072A 是一款經濟實惠的探量微細節距 IC 的解決方案。 此套件包含了十個 IC 夾及兩個雙導線轉接器,可將 IC 夾直接接到 10070 系列探棒。
11062A
設計客製的 Kelvin 探棒,以供進行 4 線式電阻量測;套件只包含兩個鍍金線夾
Keysight 11062A Kelvin 線夾套件由兩個鍍金的夾子端點所組成,讓客製的 Kelvin 探棒可以進行 4 線電阻量測。 導線以一字螺絲固定在夾子上。 一個開口提供來源的目前路徑,另一個提供感應的目前路徑。 套件僅包含兩個夾子。
Keysight 11062A 和 Keysight 34460A、34461A、34401A、3458A、34420A、34410A 與 34411A 數位萬用電錶,以及 Keysight 34970A 和 34792A 資料擷取/切換器相容。
如需更多有關用於萬用電錶的 Keysight 測試導線和探棒的資訊,請瀏覽萬用電錶測試導線和探棒。
16089B
可量測使用傳統夾具無法量測的特殊外形元件
16089B 可量測使用傳統測試夾具無法量測的特殊外形元件。 它配備兩個絕緣 Kelvin 線夾。
16089C
可量測使用傳統夾具無法量測的特殊外形元件
Keysight 16089C 可量測使用傳統測試夾具無法量測的特殊外形元件。 它配備兩個絕緣 Kelvin 線夾。
16089A
可量測使用傳統夾具無法量測的特殊外形元件
Keysight 16089A 可量測使用傳統測試夾具無法量測的特殊外形元件。 它配備兩個絕緣 Kelvin 線夾。
10075A
探棒密間距 IC,具有兩個雙導線轉接器和四個可並排安裝的 0.5 mm 夾子。
這些超小的 IC 夾是連接間距小至 0.5 mm 的 IC 的理想選擇。 夾子的結構使得您能並排安裝多個夾子。 每個套件包含 4 個 0.5 mm IC 夾和 2 個雙導線轉接器。
雙導線轉接器輕鬆連接 IC 夾和您的探棒。 您只要將 Keysight 10070 系列探棒的尖端安裝到雙導線轉接器中即可。 雙導線轉接器的另一端有適合 IC 夾或 0.635 mm 直徑線柱的兩條導線。
N1426C
Enables the N1425 to hold DUTs with large terminals while supporting voltage up to 1,000 V
N1426C 使得 N1425 能夠夾住具有大端子的待測裝置。N1425 專為與 B2985A/87A 搭配使用而設計。
U1162A
Pair these insulated alligator clips with Keysight standard test leads
The U1162A consists of one pair (red and black) of insulated alligator clips. Recommended for use with Keysight standard test leads.
Rated at CAT III 1000V, CAT IV 600V, 15A rating
Compatible with test leads shipped together with Keysight U1210, U1240B, U1250, U1270 series of handheld clamp meter and multimeter.
For more information about Keysight test leads and probes for multimeters, please visit Multimeter Test Leads and Probes.
U1176A
Clip this 3-in flashlight on your test probes for great visibility when using your handheld DMMs in dark places
• 3 inches in length
• To be clipped onto test probes to increase visibility
• Comes with one AAA battery
• Operating temperature from -10°C to 55°C
• Dimension (W x L x H): 16.3 mm x 80.0 mm x 33.5 mm
• Weight: 25g with battery
This LED flashlight is designed for used with Keysight handheld digital multimeters. The LED flashlight helps make measurements easier while using handheld digital multimeters in dark places. Clip the 3 inch flash light onto test probes and have great visibility on the test points effortlessly!
Keysight offer variety of accessories for digital multimeters, learn more about Keysight new digital multimeter accessories
U1781A
The Keysight U1781A is to be used with the U1700 Series Handheld Capacitor and LCR meters. These clips are shipped as standard with every handheld capacitor or handheld LCR meter.
The U1781A consists of a pair of alligator clip leads to be used with the U1700 handheld capacitor or LCR meters. They are shipped as standard with every unit of U1700 series meter.
Learn more about LCR Meter & Impedance Measurement Product Accessories
N1967A
Secure RF connections at the test ports of selected network analyzers and test sets
N1967A 測試埠鉤鉗可用於保護多個是德科技網路分析儀和測試儀之測試埠上的射頻連接。安裝鉤鉗後,每個鉤鉗可為連接到測試埠的 NMD 測試埠纜線,提供更高的連接安全性。如未安裝鉤鉗,在移除纜線之後,較長的纜線會纏繞著測試埠,使得驗證和量測作業變得非常不便。
您須使用精密的扭矩技術將測試埠纜線連接到是德科技網路分析儀和測試儀。使用較長的測試埠纜線時,纜線末端的移動會導致用於測試埠連接的扭矩,扭力過大或是不足。N1967A 測試埠鉤鉗可避免這類的測試埠連接變化。