All Software Catalog

為 E5055A SSA-X 信號源分析儀取得更全面、通用的相位雜訊分析功能。

S963015B SSA-X 信號源和相位雜訊分析進階功能適用於 E5055A，可為 E5055A SSA-X 增添了各種通用的量測功能，以及基本的相位雜訊、AM 雜訊和基頻雜訊量測。 E5055A 的基本配置中新增了下列相位雜訊分析功能：

• 單次量測的交互關聯數：2 到 100,000 個週期。
• 暫態量測（頻率、功率和相位）。
• 壓控振盪器（VCO）特性分析（頻率/輸出功率 vs 控制電壓）。
• 可監測高達 15 MHz 頻距的頻譜。

為 E5055A SSA-X 信號源分析儀添增全頻寬頻譜分析功能

S963905B 頻譜分析儀（SA）應用軟體，可為 E5055A SSA-X 信號源分析儀添增了高效能頻譜分析功能，以及全頻距頻率（8 GHz）。 利用最佳化資料處理所產生的快速步進 FFT 掃描，此頻譜分析儀應用軟體可在頻率範圍內進行快速突波搜尋。 除了適用於 E5055A 的 S963015B SSA-X 信號源分析儀進階功能提供簡單而基本的頻譜監控功能外，S963905B 還提供全頻距和全面的頻譜/突波分析功能，以便在 E5055A 進行更深入的分析。

• 在 E5055A SSA-X 信號源分析儀上執行高達 8 GHz 的高效能頻譜分析
• 量測功能相當於其他是德科技 VNA 上的 SA 應用軟體，例如 E5080B ENA 和 P50xxB Streamline 系列 VNA。

評估脈衝射頻信號的相位雜訊和 AM 雜訊

S96325B 脈衝射頻量測功能，適用於 SSA-X 信號源分析儀，可對脈衝射頻信號進行完整的相位雜訊和 AM 雜訊量測，無需使用外部測試儀和脈衝產生器。

• 1 Hz（可設定 1 mHz）至 3 MHz 的偏移範圍，視脈衝重複率而定。
• 支援 0.5 usec 至 5 msec 的脈衝重複率。
• 信號週期和脈衝寬度：0.01% 至 50%，脈衝寬度 >100 nsec。

S963016B Advanced Features software provides additional but fundamental features and measurement personalities for your phase noise and jitter measurements/analysis on the E5056A 26.5 GHz Signal Source Analyzer. If more than one cross-correlation operation is required in the evaluation, the S963016B software is required for E5056A.

• User-specified cross-correlation (2 to 100,000 cycles)
• Transient measurements (frequency, power, and phase transient)
• VCO characterization measurements (frequency, power, current, and frequency sensitivity)
• Spectrum monitor (up to 15 MHz span)

S963017B Advanced Features software provides additional but fundamental features and measurement personalities for your phase noise and jitter measurements/analysis on the E5057A 44 GHz Signal Source Analyzer. If more than one cross-correlation operation is required in the evaluation, the S963017B software is required for E5057A.

• User-specified cross-correlation (2 to 100,000 cycles)
• Transient measurements (frequency, power, and phase transient)
• VCO characterization measurements (frequency, power, current, and frequency sensitivity)
• Spectrum monitor (up to 15 MHz span)

S963018B Advanced Features software provides additional but fundamental features and measurement personalities for your phase noise and jitter measurements/analysis on the E5058A 54 GHz Signal Source Analyzer. If more than one cross-correlation operation is required in the evaluation, the S963018B software is required for E5058A.

• User-specified cross-correlation (2 to 100,000 cycles)
• Transient measurements (frequency, power, and phase transient)
• VCO characterization measurements (frequency, power, current, and frequency sensitivity)
• Spectrum monitor (up to 15 MHz span)

To meet the demanding needs of today's advanced digital communication systems, S96302B is the Precision Clock Jitter Analysis software running on any E505xA SSA-X series of Signal Source Analyzer for accurate characterization and evaluation of clock-signal jitter.

S96302B software enhances your ability to separate random jitter (RJ) and periodic jitter (PJ) from total jitter (TJ) by combining time-domain waveform measurement techniques and frequency-domain phase-noise measurement techniques --providing remarkably ultra-low jitter measurement capabilities for both RJ and PJ.

S96302B has the same functionality and look-and-feel user interface as the current E5001A Precision clock jitter analysis running on the E5052B Signal Source Analyzer.

• Ultra-low RJ measurement with femtosecond resolution
  
• Real-time jitter spectrum analysis on both RJ and PJ
• Time-domain measurements on jitter trend, histogram, and RJ/PJ separation of clock signals

The spectrum analyzer (SA) application adds high-performance microwave spectrum analysis to the E5056A SSA-X Signal Source Analyzer. With fast stepped-FFT sweeps resulting from optimized data processing, the SA application provides quick signal and spurious analysis/searches over broad frequency ranges.

• High-performance spectrum analysis up to 26.5 GHz on E5056A SSA-X Signal Source Analyzer
• Fast spurious searches
• Fast band-/noise-power measurements

The spectrum analyzer (SA) application adds high-performance microwave spectrum analysis to the E5057A SSA-X Signal Source Analyzer. With fast stepped-FFT sweeps resulting from optimized data processing, the SA application provides quick signal and spurious analysis/searches over broad frequency ranges.

• High-performance spectrum analysis up to 44 GHz on E5057A SSA-X Signal Source Analyzer
• Fast spurious searches
• Fast band-/noise-power measurements

The spectrum analyzer (SA) application adds high-performance microwave spectrum analysis to the E5058A SSA-X Signal Source Analyzer. With fast stepped-FFT sweeps resulting from optimized data processing, the SA application provides quick signal and spurious analysis/searches over broad frequency ranges.

• High-performance spectrum analysis up to 54 GHz on E5058A SSA-X Signal Source Analyzer
• Fast spurious searches
• Fast band-/noise-power measurements