Choose a country or area to see content specific to your location
尋找感興趣的產品?
Bridging design and physical testing to evaluate drop, impact, shock, and vibration compliance before hardware exists.
Unlock your free upgrade to the next bandwidth tier.
Strengthen 1.6T network reliability for AI-scale workloads from transceivers to interconnects.
Pair Keysight VSA software with the new XA5 signal analyzer for advanced visualization, demodulation, and analysis — start your 30-day trial today.
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
Explore end-to-end workflows spanning IC design, validation, wafer test, and photonics.
Explore curated support plans, prioritized to keep you innovating at speed.
Maximize accuracy and performance with precision accessories engineered for Keysight instruments.
Explore dual-channel and ultra-wideband signal analysis for demanding RF workflows.
Get faster, clearer insights with our new multicore, 12-bit oscilloscope up to 33 GHz. Trade in your old oscilloscope and get credit toward a new XR8.
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
Hands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Success Stories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
No Filter available
No Filter available
No Filter available
909F
Provides exceptional long-term impedance stability through tantalum nitride on sapphire thin-film technology
909E
Terminate a 75 Ω coaxial system in its characteristic impedance with this precision, low-reflection load
Keysight 909E 是精密的低反射直流至 3 GHz 負載,具有特性阻抗,很適合用於端接 75 Ω 同軸系統。它主要當作校驗標準套件使用。
85138B
Terminate a 50 Ω coaxial system in its characteristic impedance with this precision, low-reflection load
Keysight 85138B 是一個精密的低反射直流至 50 GHz 負載,具有特性阻抗,很適合用於端接 50 Ω 同軸系統。它主要當作校驗標準套件使用。Keysight 85138B 配有一個 2.4 mm 母頭連接器。
85141A
Establish measurement planes for known reflection phase and magnitude in 50 Ω coaxial systems
Keysight 85141A 同軸開路套件可用於為 50 Ω 同軸系統中已知的反射相位和振幅建立量測平面。它配有一個 2.4 mm 公頭連接器。
85141B
Establish measurement planes for known reflection phase and magnitude in 50 Ω coaxial systems
Keysight 85141B 同軸開路套件可用於為 50 Ω 同軸系統中已知的反射相位和振幅建立量測平面。它配有一個 2.4 mm 母頭連接器。
42090A
Use for performance tests of 4-terminal pair LCR meters and impedance analyzers.
The 42090A is an open termination and is primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers. Refer to the instrument's operation/service manual for the method of using this standard.
42091A
Use for performance tests of the 4-terminal pair LCR meters and impedance analyzers.
The 42091A is a short termination and is primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers. Refer to the instrument's operation/service manual for the method of using this standard.
85138A
85138A coaxial termination, DC to 50 GHz; terminates 50 ohm systems with precision low-reflection characteristics.
The Keysight 85138A is a precision, low-reflection dc to 50 GHz load for terminating a 50-ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard. The Keysight 85138A has a 2.4 mm male connector.
909A
909A coaxial termination, DC to 18 GHz; terminates 50 ohm systems with precision low-reflection characteristics.
The Keysight 909A is a general-purpose, low-reflection load for terminating a 50-ohm coaxial system in its characteristic impedance over the dc to 18 GHz range. It is suitable for both broadband and narrowband measuring instruments. The Keysight 909A may be ordered with an APC-7, type-N female, or type-N male connector.
909C
909C coaxial termination, DC to 2 GHz; terminates 50 ohm systems with precision low-reflection characteristics.
The Keysight 909C is a precision, low-reflection dc to 2 GHz load for terminating a 50-ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard. The Keysight 909C may be ordered with an APC-7, type-N male, or type-N female connector.
909D
909D coaxial termination, DC to 26.5 GHz; terminates 50 ohm systems with precision low-reflection characteristics.
The Keysight 909D is a precision, low-reflection dc to 26.5 GHz load for terminating a 50-ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard.
85140B
Establish measurement planes for known reflection phase and magnitude in 50 Ω coaxial systems
Keysight 85140B 同軸短路套件可用於為 50 Ω 同軸系統中的已知反射相位和振幅建立量測平面。它配有一個 2.4 mm 母頭連接器。