這是我們認為您想查看的頁面. 觀看搜尋結果:

產品特性

  • InfiniiMode
  • 可與所有 InfiniiMax III/III+ 配件和新的 QuickTip 探頭相容
  • 探棒放大器加載了「經過量測的」S 參數，可實現更準確的交流修正
  • 可直接連接至 Infiniium 90000X/Q 和 V 系列示波器（需要軟體版本 5.50 或更高版本）

頻寬增強型 N7000A InfiniiMax III+ 8 GHz 探棒放大器，適用於一般的高速差動匯流排探量。

Keysight InfiniiMax III+ 探棒採用獨特的 InfiniiMode 技術，大幅擴展了量測功能和易用性，使得工程師能夠全面量測差動信號的所有成分。工程師只需連接 InfiniiMax III+ 探棒便可進行設定，以便量測差動信號、單端 A 或 B 信號，以及差動信號的共模成分。

與 InfiniiMax III 技術一樣，每個單獨的 InfiniiMax III+ 探棒放大器都包含其獨特的 S 參數，而且此頻率響應資料可與各種探棒頭的 S 參數結合使用，使得探棒的振幅和相位響應變得更平坦，進而大幅提高準確度。藉由修正每支探棒放大器的響應，以獲得更精確的探棒，進而獲得更準確的量測結果。

擴充儀器功能

配件
查看所有配件

N7000A InfiniiMax III+ 系列探棒放大器的精選資源

Application Notes 2024.10.20

Demystifying RCRC and RC Probes

Demystifying RCRC and RC Probes

An ideal oscilloscope probe would simply provide an exact replica of the signal being probed. However, in the real world, the probe becomes a part of the circuit under test because the probe or probing accessories attached to the device under test (DUT) introduce probe loading to the circuit. Depending on the probe and the circuit, the probe loading may cause unwanted side effects such as overshooting, ringing, and DC offset problems in the time domain. Learn more about the difference between RC and RCRC probe architecture, what this means for probe loading, and how to get the most accurate measurements.

2024.10.20

Application Notes 2018.06.20

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Keysight InfiniiMax differential probes are DSP corrected to have a flat magnitude and phase response to provide the highest possible accuracy. The bandwidth chosen to correct to is typically around 3dB non-corrected bandwidth. Usually, extending the bandwidth much beyond that point will increase the noise floor, and if pushed even further, can cause unrealistic noise artifacts. This application note presents the techniques used to extend the bandwidth performance of the InfiniiMax 1169A/B and the N5381A/B solder-in head using the PrecisionProbe application on Infiniium realtime oscilloscope.

2018.06.20

Application Notes 2023.03.12

Probe Soldering Guidelines for Keysight InfiniiMax Probes

Probe Soldering Guidelines for Keysight InfiniiMax Probes

There are various ways to connect test instrumentation probes to devices under test (DUTs). One such method is soldering, which provides a reliable connection and minimizes parasitic probing effects by keeping wire lengths and connections as short as possible. Many of Keysight’s high performance oscilloscope probes utilize soldered connections. As probes and devices continue to shrink, using the correct tools and soldering skills becomes even more critical in order to avoid damage and connectivity issues. This guide provides helpful tips, recommended tools, and techniques specific to Keysight probes to help test engineers make the most out of their soldered-in probes and connections.

2023.03.12

Quick Start Guides 2019.01.21

Quick Reference Card for Keysight N7000/1/2/3A InfiniiMax III+ Probes

Quick Reference Card for Keysight N7000/1/2/3A InfiniiMax III+ Probes

This card quickly describes how to use the InfiniiMax III+ probes and compatible browsers and probe heads.

2019.01.21

User Manuals 2015.01.31

Handling Guide for Keysight N7000/1/2/3A InfiniiMax III+ Probes

Handling Guide for Keysight N7000/1/2/3A InfiniiMax III+ Probes

This guide assists you in properly handling your InfiniiMax III+ N7000/1/2/3A probes to prevent damage and maintain high performance.

2015.01.31

Data Sheets 2024.06.25

Infiniium Oscilloscope Probes and Accessories

Infiniium Oscilloscope Probes and Accessories

To get the most out of your Keysight Infiniium oscilloscope, you need the right probes and accessories for your particular applications. Whether you need the high bandwidth and low loading of an active probe, an easy way to connect to surface mount ICs, or a passive probe to measure high voltages, there’s a wide selection of high-quality probes and accessories for your Infiniium oscilloscope. The Infiniium probes and accessories data sheet provides you the overview of all probes and accessories recommended for Infiniium oscilloscopes.

2024.06.25

Data Sheets 2024.12.02

InfiniiMax RCRC Probing System

InfiniiMax RCRC Probing System

The new InfiniiMax 4 series probing system is a groundbreaking solution designed to deliver unparalleled signal fidelity and accuracy with bandwidth capabilities reaching up to 52 GHz, all while maintaining exceptionally low loading. With the InfiniiMax III/III+ probe amplifiers, this advanced InfiniiMax RCRC probe system ensures swift and reliable measurements ranging from 8 GHz to 52 GHz, setting a new standard in probing technology.

2024.12.02

User Manuals 2023.02.09

N2830/1/2A and N7000/1/2/3A InfiniiMax III+ Probes User Guide

N2830/1/2A and N7000/1/2/3A InfiniiMax III+ Probes User Guide

This document contains information about the InfiniiMax III and III+ Probing System.

2023.02.09

Oscilloscope Probes Selection Guide

Oscilloscope Probes Selection Guide

Keysight offers a broad range of voltage, current, and optical probing solutions for InfiniiVision and Infiniium Series oscilloscopes.
查看所有資源

查看所有資源

是德科技客服中心提供您需要的協助

聯絡我們