The file on this page is provided for free. It is firmware for the PD1550A Advanced Dynamic Power Device Analyzer/Double-Pulse Tester that contains enhanced features and bug fixes. Keysight recommends always installing the latest firmware.

是德建議使用最新的版本，其中包括最新的漏洞修復與安全覆蓋
發佈日期 版本 版本說明
2026-04-30 2.11.3 Required to use PD1000A control software version 2026 Update 1 and 2026 Update 2.
發佈日期 版本
2026-04-30 2.11.3
Version Description
Required to use PD1000A control software version 2026 Update 1 and 2026 Update 2.

如何下載

  1. Click Download, enter your information as required, and then click Download again.

如何安裝

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

授權

  • Does Not Require a License

支援文件

外掛軟體/工具程式

  • None
Download

Installs on: Instrument

作業系統

  • FreeRTOS, a real-time operating system for microcontrollers

參加條件

  • The FW can be installed via the SW - no FW utilities necessary

支援的儀器

如何下載

  1. Click Download, enter your information as required, and then click Download again.

如何安裝

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

授權

  • Does Not Require a License

支援文件

外掛軟體/工具程式

  • None
Download

Installs on: Instrument

作業系統

  • FreeRTOS, a real-time operating system for microcontrollers

參加條件

  • The FW can be installed via the SW - no FW utilities necessary

支援的儀器

如何下載

  1. Click Download, enter your information as required, and then click Download again.

如何安裝

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

授權

  • Does Not Require a License

支援文件

外掛軟體/工具程式

  • None
Download

Installs on: Instrument

作業系統

  • FreeRTOS, a real-time operating system for microcontrollers

參加條件

  • The FW can be installed via the SW - no FW utilities necessary

支援的儀器

如何下載

  1. Click Download, enter your information as required, and then click Download again.

如何安裝

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

授權

  • Does Not Require a License

支援文件

外掛軟體/工具程式

  • None
Download

Installs on: Instrument

作業系統

  • FreeRTOS, a real-time operating system for microcontrollers

參加條件

  • The FW can be installed via the SW - no FW utilities necessary

支援的儀器

SHOW MORE