The file on this page is provided for free. It is firmware for the PD1550A Advanced Dynamic Power Device Analyzer/Double-Pulse Tester that contains enhanced features and bug fixes. Keysight recommends always installing the latest firmware.

キーサイトは、最新のバグ修正とセキュリティパッチを含む、利用可能な最新バージョンを使用することをお勧めします。
リリース バージョン 内容
2026-04-30 2.11.3 Required to use PD1000A control software version 2026 Update 1 and 2026 Update 2.
リリース バージョン
2026-04-30 2.11.3
Version Description
Required to use PD1000A control software version 2026 Update 1 and 2026 Update 2.

ダウンロード方法

  1. Click Download, enter your information as required, and then click Download again.

インストール方法

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

ライセンス

  • Does Not Require a License

説明資料

アドオン・ソフトウェア/ユーティリティ

  • None
Download

Installs on: Instrument

OS

  • FreeRTOS, a real-time operating system for microcontrollers

前提知識

  • The FW can be installed via the SW - no FW utilities necessary

対象測定器

ダウンロード方法

  1. Click Download, enter your information as required, and then click Download again.

インストール方法

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

ライセンス

  • Does Not Require a License

説明資料

アドオン・ソフトウェア/ユーティリティ

  • None
Download

Installs on: Instrument

OS

  • FreeRTOS, a real-time operating system for microcontrollers

前提知識

  • The FW can be installed via the SW - no FW utilities necessary

対象測定器

ダウンロード方法

  1. Click Download, enter your information as required, and then click Download again.

インストール方法

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

ライセンス

  • Does Not Require a License

説明資料

アドオン・ソフトウェア/ユーティリティ

  • None
Download

Installs on: Instrument

OS

  • FreeRTOS, a real-time operating system for microcontrollers

前提知識

  • The FW can be installed via the SW - no FW utilities necessary

対象測定器

ダウンロード方法

  1. Click Download, enter your information as required, and then click Download again.

インストール方法

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

ライセンス

  • Does Not Require a License

説明資料

アドオン・ソフトウェア/ユーティリティ

  • None
Download

Installs on: Instrument

OS

  • FreeRTOS, a real-time operating system for microcontrollers

前提知識

  • The FW can be installed via the SW - no FW utilities necessary

対象測定器

SHOW MORE