The file on this page is provided for free. It is firmware for the PD1550A Advanced Dynamic Power Device Analyzer/Double-Pulse Tester that contains enhanced features and bug fixes. Keysight recommends always installing the latest firmware.

Keysight는 가능한 최신 버전을 사용하는 것을 권장하며, 최신 버전에는 현재 사용 가능한 가장 최신 버그 수정 및 보안 패치가 포함되어 있습니다.
릴리스 날짜 버젼 버전 설명
2026-04-30 2.11.3 Required to use PD1000A control software version 2026 Update 1 and 2026 Update 2.
릴리스 날짜 버젼
2026-04-30 2.11.3
Version Description
Required to use PD1000A control software version 2026 Update 1 and 2026 Update 2.

다운로드 방법

  1. Click Download, enter your information as required, and then click Download again.

설치 방법

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

라이센스

  • Does Not Require a License

지원 문서

부가 소프트웨어 / 유틸리티

  • None
Download

Installs on: Instrument

운영 체제

  • FreeRTOS, a real-time operating system for microcontrollers

선결 조건

  • The FW can be installed via the SW - no FW utilities necessary

지원되는 계측기

다운로드 방법

  1. Click Download, enter your information as required, and then click Download again.

설치 방법

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

라이센스

  • Does Not Require a License

지원 문서

부가 소프트웨어 / 유틸리티

  • None
Download

Installs on: Instrument

운영 체제

  • FreeRTOS, a real-time operating system for microcontrollers

선결 조건

  • The FW can be installed via the SW - no FW utilities necessary

지원되는 계측기

다운로드 방법

  1. Click Download, enter your information as required, and then click Download again.

설치 방법

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

라이센스

  • Does Not Require a License

지원 문서

부가 소프트웨어 / 유틸리티

  • None
Download

Installs on: Instrument

운영 체제

  • FreeRTOS, a real-time operating system for microcontrollers

선결 조건

  • The FW can be installed via the SW - no FW utilities necessary

지원되는 계측기

다운로드 방법

  1. Click Download, enter your information as required, and then click Download again.

설치 방법

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

라이센스

  • Does Not Require a License

지원 문서

부가 소프트웨어 / 유틸리티

  • None
Download

Installs on: Instrument

운영 체제

  • FreeRTOS, a real-time operating system for microcontrollers

선결 조건

  • The FW can be installed via the SW - no FW utilities necessary

지원되는 계측기

SHOW MORE