The file on this page is provided for free. It is firmware for the PD1550A Advanced Dynamic Power Device Analyzer/Double-Pulse Tester that contains enhanced features and bug fixes. Keysight recommends always installing the latest firmware.

Keysight empfiehlt die Verwendung der aktuellen Version, die die neuesten verfügbaren Fehlerbehebungen und Sicherheitspatches enthält.
Veröffentlichungsdatum Version Versionsbeschreibung
2026-04-30 2.11.3 Required to use PD1000A control software version 2026 Update 1 and 2026 Update 2.
Veröffentlichungsdatum Version
2026-04-30 2.11.3
Version Description
Required to use PD1000A control software version 2026 Update 1 and 2026 Update 2.

Wie geht das Herunterladen

  1. Click Download, enter your information as required, and then click Download again.

How to Install

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

Lizenzierung

  • Does Not Require a License

Dokumentation

Add-On Software / Utilities

  • None
Download

Installs on: Instrument

Betriebssystem

  • FreeRTOS, a real-time operating system for microcontrollers

Voraussetzungen

  • The FW can be installed via the SW - no FW utilities necessary

Supported Instruments

Wie geht das Herunterladen

  1. Click Download, enter your information as required, and then click Download again.

How to Install

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

Lizenzierung

  • Does Not Require a License

Dokumentation

Add-On Software / Utilities

  • None
Download

Installs on: Instrument

Betriebssystem

  • FreeRTOS, a real-time operating system for microcontrollers

Voraussetzungen

  • The FW can be installed via the SW - no FW utilities necessary

Supported Instruments

Wie geht das Herunterladen

  1. Click Download, enter your information as required, and then click Download again.

How to Install

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

Lizenzierung

  • Does Not Require a License

Dokumentation

Add-On Software / Utilities

  • None
Download

Installs on: Instrument

Betriebssystem

  • FreeRTOS, a real-time operating system for microcontrollers

Voraussetzungen

  • The FW can be installed via the SW - no FW utilities necessary

Supported Instruments

Wie geht das Herunterladen

  1. Click Download, enter your information as required, and then click Download again.

How to Install

  1. Open the Control Software for PD1000 Series.
  2. Click Settings > Hardware Configuration for Double Pulse Test Control.
  3. In the Hardware Configuration dialog box, in the DPT System PD1550A tab, make sure that you have the correct input for the following fields:
    • Double Pulse System: PD1550A
    • IP Address: “systemIp”
  4. Click Settings > Firmware Update, then, under Firmware File, click the button .and upload the file PD1550A_CTRL_<VersionNumber>.bin. Click Update.
  5. In the Confirm Update dialog, click Yes.
  6. In the Firmware Update Status dialog, if the status is Done, click Exit.
  7. Repeat steps 4 to 6, this time for the file PD1550A_Safety_<VersionNumber>.bin.
  8. To verify if the update was done correctly, go to Settings > Hardware Configuration for Double Pulse Test Control >DPT System PD1550A and click Check. If the upload was successful, the installed firmware version will appear after the Serial number of the Control Unit and Safety Unit.

Lizenzierung

  • Does Not Require a License

Dokumentation

Add-On Software / Utilities

  • None
Download

Installs on: Instrument

Betriebssystem

  • FreeRTOS, a real-time operating system for microcontrollers

Voraussetzungen

  • The FW can be installed via the SW - no FW utilities necessary

Supported Instruments

SHOW MORE