尋找感興趣的產品?
建議的搜尋
No product matches found - System Exception
相關內容
PA2200 系列韌體
更新儀器韌體前,請先將電源通道輸入的電源移除。連接器可以繼續插著,但電源分析儀不可以有電流或電壓信號流入。
是德建議使用最新的版本,其中包括最新的漏洞修復與安全覆蓋
發佈日期 | 版本 | 版本說明 |
---|---|---|
2017-03-15 | 2.37 | Changes the remote response to the Continuous Whole-Cycle Analysis (CWA) query if the measurement has not been initiated or was unable to complete, and resolves minor defects. |
發佈日期 | 版本 |
---|---|
2017-03-15 | 2.37 |
版本說明 |
---|
Changes the remote response to the Continuous Whole-Cycle Analysis (CWA) query if the measurement has not been initiated or was unable to complete, and resolves minor defects. |
如何下載
Click the download button and either save the file to a USB flash drive or save the file to your computer and then copy it to a USB flash drive.
如何安裝
To perform the firmware update:
- Put the USB flash drive with the *.KUP file into one of the front-panel USB ports.
- Press [Utility] > File Explorer.
- Use the first softkey and the Entry knob to browse to the *.KUP file on the USB drive.
-
Press the Load File softkey.
The firmware update utility will run, and the instrument will cycle power to start running the new firmware.
授權
- 不需要授權
支援文件
如何下載
Click the download button and either save the file to a USB flash drive or save the file to your computer and then copy it to a USB flash drive.
如何安裝
To perform the firmware update:
- Put the USB flash drive with the *.KUP file into one of the front-panel USB ports.
- Press [Utility] > File Explorer.
- Use the first softkey and the Entry knob to browse to the *.KUP file on the USB drive.
-
Press the Load File softkey.
The firmware update utility will run, and the instrument will cycle power to start running the new firmware.
授權
- 不需要授權
支援文件
SHOW MORE