Highlights

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with field-upgradeable software licenses. These capabilities are engineered to deliver benchtop results into the field.

  • Handle routine maintenance and in-depth troubleshooting with one instrument
  • Maximize performance with a spectrum analyzer, built-in power meter, vector voltmeter, and more
  • Order with a new instrument or upgrade an existing instrument
Base model includes a spectrum analyzer (SA).

Spectrum Analysis

  • 209 – Extended Range Transmission Analysis (ERTA)

    Measure the scalar transmission gain or loss of waveguide systems, mixers, converters, and long cables where the two ends cannot easily meet.

  • 220 – Full-band Tracking Generator

    Elevate your Spectrum Analyzer with the dynamic tracking generator for precise frequency tracking in SA mode.

  • 235 – Pre-amplifier

    Increase spectrum analyzer sensitivity and reduce the DANL.

  • 236 – Interference Analyzer and Spectrogram

    Identify interfering signals quickly and accurately using the spectrogram or waterfall display. Record traces over time and store for offline processing.

  • 238 – Spectrum Analyzer Time Gating

    Measure the spectrum of a periodic signal during a specified time interval.

  • 350 – Real-Time Spectrum Analyzer (RTSA)

    Use gap-free, real-time spectrum analysis (RTSA) with 100 MHz of real-time bandwidth to capture small and intermittent signals masked by larger signals.

  • 351 – I/Q analyzer (IQA)

    Demodulate I/Q data and verify final signal chain integration or troubleshoot signal quality degradation due to hardware or software issues.

  • 353 – IQ Streaming

    Provide gapless IQ data to external application software to perform spectrum monitoring, demodulation, and decoding.

  • 355 – Analog Demodulation

    Demodulate and characterize AM and FM signals of radio transmitters.

  • 356 – Noise Figure (NF)

    Characterize devices like low noise amplifiers, frequency converters, and receivers with portable, one-button Y-factor noise figure and gain measurements.

  • 361 – Electromagnetic Interference (EMI) Measurements

    Evaluate EMI pre-compliance limits, perform equipment or network regulatory audits, and troubleshoot circuit boards.

5G / LTE Field Test

  • 312 – Channel Scanner

    Verify signal coverage, detect interference, and optimize network performance using simultaneous channel power measurements for up to 20 channels.

  • 358 – Electromagnetic Field (EMF) Measurements

    Evaluate total RF exposure levels. Verify compliance with regulatory and government requirements using a triaxial isotropic antenna.

  • 370 – Over-the-Air (OTA) LTE FDD

    Analyze LTE FDD cell information transmitted over-the-air and optimize inter-RAT handovers for overlapping 5G and LTE networks.

  • 371 – Over-the-air (OTA) LTE TDD

    Uncover the 4G cells available at a specific frequency or component carrier for LTE signals using the time division duplex frame structure.

  • 378 – Over-the-air (OTA) 5G NR

    Measure and decode 5G NR signal quality metrics to verify the 5G coverage at FR1 or FR2 frequencies.

  • B04 – Analysis Bandwidth, 40 MHz

    Optimize signal analysis for communication signals like scalable multi-channel LTE with 40 MHz bandwidth.

  • B10 – Analysis Bandwidth, 120 MHz

    Enable quantifications for bandwidth-hungry modern signals such as in 5G NR and satellite communications with 120 MHz bandwidth.

Power Measurements

  • 208 – USB Power Measurements versus Frequency

    Characterize the scalar transmission response of devices such as mixers and converters using USB power sensor measurements versus frequency.

  • 302 – USB Power Sensor Support

    Characterize RF pulses such as those used in radar and electronic warfare systems using a USB peak power sensor.

  • 310 – Built-in Power Meter

    Make accurate, user-definable channel power measurements such as transmitter output power without additional external hardware.

  • 330 – Pulse Measurement with USB Peak Power Sensor

    Efficiently characterize pulsed RF signals by leveraging a Keysight USB peak power sensor.

Utilities

  • 030 – Remote Control Capability

    View and control FieldFox remotely using an iOS device or an Android device.

  • 307 – GPS Receiver

    Attach geolocation tags to measurements with a built-in GNSS/GPS receiver.

  • 309 – DC Bias Variable Voltage Source

    Provide power to amplifiers under test and bias tower mounted amplifiers.

  • 352 – Indoor and Outdoor Mapping

    Import indoor and outdoor maps for data collection and plotting to the map.

Learn more about each software option in the Technical Overview.

Want help or have questions?