N9918BU FieldFox 手持式分析儀軟體

Perform high-performance spectrum analysis with four trace options, different detector types, radio standard selection, and flexible limit lines.

Use gap-free, real-time spectrum analysis (RTSA) with 100 MHz of real-time bandwidth to capture small and intermittent signals masked by larger signals.

Characterize devices like low noise amplifiers, frequency converters, and receivers with portable, one-button Y-factor noise figure and gain measurements.

Demodulate I/Q data and verify final signal chain integration or troublesoot signal quality degradation due to hardware or software issues.

Identify interfering signals quickly and accurately using spectogram or waterfall display. Record traces over time and store them for offline processing.  

Measure the scalar transmission gain or loss of waveguide systems, mixers, converters, and long cables where the two ends cannot easily meet.

Use vector network analyzer mode to measure transmission and reflection (S21 and S11) magnitude and phase.

Display reflection or transmission coefficients in the time domain and remove unwanted responses with time-domain gating.

Enable vector network analyzer mode to measure all four S-parameters (S21, S11, S12, S22) magnitude and phase.

Make balanced, mixed-mode S-parameter reflection measurements (Scc11, Sdd11, Scd11, Sdc11) with network analyzer mode.

Measure the phase shift and elctrical length of a device and view the results on the large display from a distance.

Identify the location and nature of faults alon cables using time-domain reflectometry measurements.

Deploy and optimize 5G technologies like massive MIMO by verifying base station beam characteristics and signal power across azimuth and elevation.

Analyze 5G NR FR1 and FR2 cell information transmitted over-the-air and optimize inter-RAT handovers for overlapping 5G and LTE networks.

Demodulate and analyze 5GTF cell information transmitted over-the-air from base station downlink multi-path and multi-cell environments.

Analyze LTE FDD cell information transmitted over-the-air and optimize inter-RAT handovers for overlapping 5G and LTE networks.

Verify signal coverage, identify potential interference issues, and optimize network performance with channel power measurements of up to 20 channels at once.

Evaluate total RF exposure levels in any given area. Verify compliance to regulatory and government requirements using a triaxial isotropic antenna.