Digital Video Modulation analysis for multiple formats:
Digital Video Modulation Analysis: E9285B-H01 DVB-T/H; E9285B-H02 ISDB-T; E9285B-H08 DTMB; E9285B-H07 DVB-SH (OFDM mode Only)
Digital Audio Modulation Analysis: E9285B-H06 DAB/DAB+/T-DMB; E9285B-H09 ISDB-TSB
Other: E9285B-H03 ETC; E9285B-H04 DSRC
Features:
Support different RF front-ends depending on performance requirement: X-Series Signal Analyzer, PSA, E4406A or VXI-based RF Vector Signal Analyzer 89640S or 89641S
Saving and Recalling Setup
Saving and Recalling Recording
Readout/Display:
Symbol IQ Constellation
Symbol Metrics (Overall MER, EVM, Frequency Error, Amplitude Error, Phase Error etc)
Channel Frequency/Impulse Response
CCDF, Time and Spectrum (including channel power)
E9285B is PC-based software for modulation analysis which will run on X-Series or can be used on a PC with ESA-E, PSA or X-Series as the RF front-end. The 89601A VSA software must also be installed on the same PC (or X-Series) for hardware connectivity but no 89600 license is required.
The E9285B software includes the following options:
Compliant with DVB-T standard ETSI EN 300 744 and DVB-H standard ETSI EN 302 304
2K, 8K and now 4K C-OFDM modes supported
5MHz channel width supported (plus 6, 7 and 8 MHz)
Readouts/displays: Symbol IQ Constellation; Symbol Metrics (MER, EVM and Frequency Error etc); Equalizer Frequency/Impulse Response; Error Vector Spectrum; CCDF and Spectrum etc
Carrier frequency and bandwidth can be set from user interface
Support the modes and segment types called out in the ISDB-T standard
Readouts/displays: Symbol IQ Constellation; Symbol Metrics (MER, EVM and Frequency Error etc); Channel Frequency/Impulse Response; Equalizer Frequency/Impulse Response; Error Vector Spectrum; CCDF and Spectrum etc
Compliant with DAB, DAB+ and T-DMB physical layer standards
Carrier frequency and bandwidth can be set from user interface
Support the Mode I, II, III and IV defined in DAB standard
Readouts/displays: Symbol IQ Constellation; Symbol Metrics (Overall MER, EVM; Frequency Error, Amplitude Error and Phase Error); Channel Frequency/Impulse Response; Equalizer Frequency Response; Error Vector Spectrum; CCDF, Time and Spectrum
Carrier frequency and bandwidth can be set from user interface
Support the modes and segment types called out in the DVB-SH standard
Readouts/displays: Symbol IQ Constellation; Symbol/Metrics (MER, EVM and Frequency Error etc); Channel Frequency/Impulse Response; Error Vector Spectrum; CCDF and Spectrum etc
