Instructions for BIOS Update (Refer to Service Note E4991A-03)

  1. Download the zip file (E4991A_BIOS_020311.zip) to your PC.
  2. Unzip the zip file then you can see the following three files.
  3. Extract (or Drug and Drop) these three files to your Desktop screen.
  4. Insert your formatted floppy disk to your PC's floppy disk drive.
  5. Double click make_fd.bat file on your desktop screen. Then you can see Command Prompt screen.
  6. Press any key. Then BIOS Update software is automatically installed to your floppy disk. In case it fails, close the Command Prompt screen and retry from (5).
  7. While installing, you see xxxx-xxxx of 2879. Then "copy complete" is shown when all the installation is completed.
  8. Verify the following 10 files are on your floppy disk.
  • 91A_0311.ROM
  • Choice.com
  • IBMBIO.COM
  • IBMDOS.COM
  • PANEL.EXE
  • PHLASH.EXE
  • PLATOEM.BIN
  • AUTOEXEC.BAT
  • COMMAND.COM
  • CONFIG.SYS

Note: AUTOEXEC.BAT, COMMAND.COM and CONFIG.SYS can be seen when the "show hidden files and folders" is activated. To check this, go to followings below.

Explorer -> Tools -> Folder Options... -> view -> Hidden Files and folders.

The BIOS update instructions above is applicable to Phoenix BIOS only.

是德建議使用最新的版本，其中包括最新的漏洞修復與安全覆蓋
發佈日期 版本 版本說明
2007-02-05 020311 E4991A RF Impedance/Material Analyzer BIOS Update
發佈日期 版本
2007-02-05 020311
Version Description
E4991A RF Impedance/Material Analyzer BIOS Update

如何下載

  • Click the download button and save the file to a temporary directory on your PC (or instrument).

如何安裝

  • See Above

授權

  • Does Not Require a License
Download

Installs on: Instrument

作業系統

  • Windows 2000

參加條件

  • No specific prerequisites

支援的儀器

  • E4991A
無可用的軟體版本
SHOW MORE