Choose a country or area to see content specific to your location
무엇을 찾고 있습니까?
Bridging design and physical testing to evaluate drop, impact, shock, and vibration compliance before hardware exists.
Unlock your free upgrade to the next bandwidth tier.
Strengthen 1.6T network reliability for AI-scale workloads from transceivers to interconnects.
Pair Keysight VSA software with the new XA5 signal analyzer for advanced visualization, demodulation, and analysis — start your 30-day trial today.
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
Explore end-to-end workflows spanning IC design, validation, wafer test, and photonics.
Explore curated support plans, prioritized to keep you innovating at speed.
Maximize accuracy and performance with precision accessories engineered for Keysight instruments.
Explore dual-channel and ultra-wideband signal analysis for demanding RF workflows.
Get faster, clearer insights with our new multicore, 12-bit oscilloscope up to 33 GHz. Trade in your old oscilloscope and get credit toward a new XR8.
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
Hands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Success Stories
가장 빈번하게 발생하는 작업 관련 셀프 도움말에 빠르게 액세스할 수 있습니다
제품 요구 사항을 지원하는 추가 콘텐츠
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
No Filter available
No Filter available
Keysight DAQM910A is a 20 Channel Multiplexer (2/4-wire) module with low voltage circuit protection and switching capability of up to 40 Vpk and built-in thermocouple reference junction.
Keysight DAQM910A is a 20 Channel Multiplexer (2/4-wire) module with low voltage circuit protection and switching capability of up to 40 Vpk and built-in thermocouple reference junction.
DAQM910A
Keysight DAQM910A is a 20 Channel Multiplexer (2/4-wire) module with low voltage circuit protection and switching capability of up to 40 Vpk and built-in thermocouple reference junction.
The Keysight DAQM910A module data acquisition system is a low-voltage 20-channel multiplexer module. It combines dense, multifunction switching with 80-channel-per-second scan rates to address a broad spectrum of low-voltage data acquisition applications. You can mix two- and four-wire channels on the same module. Additional features include the following:
The standard product includes the following:
Please Note: Firmware version A.03 or above is required on DAQ970A and DAQ973A for compatibility with the DAQM910A.
Use with the DAQA191A 2U Dual Flange Kit to mount two Keysight System II instruments side by side
Use with the DAQA191A 2U Dual Flange Kit to mount two Keysight System II instruments side by side
DAQA194A
Use with the DAQA191A 2U Dual Flange Kit to mount two Keysight System II instruments side by side
키사이트 DAQA194A 이중 잠금 링크 키트는 나란히 결합할 것을 권장하며 다양한 깊이의 계측기를 위한 링크를 포함합니다. 이 키트는 두 개의 키사이트 System II(하프 폭, 2U 높이 - 88.1mm) 계측기를 나란히 장착하기 위해 DAQA191A 2U 이중 플랜지 키트와 함께 사용할 수 있습니다.
키사이트 DAQA194A 이중 잠금 링크 키트는 키사이트 DAQ970A, 34970A, 및 34972A 데이터 수집 시스템, 키사이트 34460A, 34461A, 34465A, 34470A 및 34420A 디지털 멀티미터 제품과 호환됩니다.
DAQ에 대한 더 자세한 정보는 데이터 수집 - DAQ 페이지를 방문하십시오.
81150A 펄스 함수 임의 노이즈 생성기는 신호 생성, 변조, 왜곡 기능을 갖춘 고정밀 펄스 생성기입니다.
81150A 펄스 함수 임의 노이즈 생성기는 신호 생성, 변조, 왜곡 기능을 갖춘 고정밀 펄스 생성기입니다.
81150A
81150A 펄스 함수 임의 노이즈 생성기는 신호 생성, 변조, 왜곡 기능을 갖춘 고정밀 펄스 생성기입니다.
키사이트 81150A 펄스 함수 임의 노이즈 생성기는 다목적 신호 생성, 변조, 왜곡 기능을 통해 디바이스 한계치까지 스트레스를 가하는 고정밀 펄스 생성기입니다. (최대 330 MHz의 펄스 주파수와 최대 500 MHz의 사인 주파수로 동일한 통합 기능을 사용하려면 키사이트 81160A를 고려하십시오.)
BenchVue Basic 앱을 무료로 다운로드하여 장비를 제어하십시오.
DAQM903A 20 Channel Actuator/GP Switch Module for DAQ970A and DAQ973A. 20 independent single-pole, double-throw (SPDT) relays with switching voltage up to 300 V.
DAQM903A 20 Channel Actuator/GP Switch Module for DAQ970A and DAQ973A. 20 independent single-pole, double-throw (SPDT) relays with switching voltage up to 300 V.
DAQM903A
DAQM903A 20 Channel Actuator/GP Switch Module for DAQ970A and DAQ973A. 20 independent single-pole, double-throw (SPDT) relays with switching voltage up to 300 V.
키사이트 DAQM903A는 20개의 독립적인 SPDT(Single-Pole, Double-Throw) 릴레이를 제공하는 범용 스위치 모듈 데이터 수집 시스템입니다. 이 제품은 테스트 대상 제품에 전력을 공급하고, 표시기와 상태 등을 제어하고, 외부 전력 릴레이와 솔레노이드를 활성화하는 데 사용할 수 있습니다. 매트릭스 및 멀티플렉서 모듈과 결합해서 맞춤형 스위치 시스템을 만들어 보십시오. 모듈의 300 V, 1 A 접점은 최대 50 W를 처리할 수 있어 많은 전력선 스위칭 분야에 적합합니다.
표준 제품 포함 내역:
M9505A 5-slot AXIe chassis with embedded system module and Gen 2, x8 link to external controller.
M9505A 5-slot AXIe chassis with embedded system module and Gen 2, x8 link to external controller.
M9505A
M9505A 5-slot AXIe chassis with embedded system module and Gen 2, x8 link to external controller.
The M9505A AXIe Chassis is fully compatible with the AXIe 1.0 specification. It includes an embedded system module (ESM) that does not take up an instrument slot. This system module performs the chassis management functions contained in the AXIe specification. Additionally, it provides PCI and LAN interfaces for connection to an external computer, external clock and trigger connectors, and Keysight-exclusive, inter-chassis synchronization connectors. The local bus implemented in the M9505A provides the maximum 62 pairs allowed by the AXIe specification. Combine the M9505A with the M9048A PCIe Desktop Adaptor to achieve the highest system bandwidth.
The instrument modules slots are arranged horizontally to minimize rack space. This arrangement combined with a high-performance cooling system allows the chassis to be racked in only 4U of space. The M9505A is also designed to be easily maintained as both the power supply and fan tray can be removed while the chassis remains in the rack.

유연한 이산 외부 배선 연결 방법을 제공합니다; 나사형 연결을 사용한 탈부착
유연한 이산 외부 배선 연결 방법을 제공합니다; 나사형 연결을 사용한 탈부착
34923T
유연한 이산 외부 배선 연결 방법을 제공합니다; 나사형 연결을 사용한 탈부착
키사이트 34923T는 34923A 40/80채널 리드 멀티플렉서용 터미널 블록입니다. 이 터미널 블록은 이산 배선에 사용됩니다. 지원되는 일반적인 와이어 크기는 연결이 100개 이하인 경우 최대 20 AWG, 100개 이상인 경우 24 AWG입니다. 다음 두 터미널 블록은 34923A 모듈에 대한 배선 연결을 활용할 수 있습니다.
34923T는 유연한 외부 배선 연결 방법을 제공하는 나사형 연결이 특징인 탈부착식 터미널 블록입니다.
자세한 정보가 필요하면 키사이트 다기능 스위치/측정 메인프레임 및 모듈을 방문하십시오
업계 최고의 정확도, 낮은 SWR, 다양한 감쇠 옵션으로 작동 주파수 범위 극대화
업계 최고의 정확도, 낮은 SWR, 다양한 감쇠 옵션으로 작동 주파수 범위 극대화
8490G
업계 최고의 정확도, 낮은 SWR, 다양한 감쇠 옵션으로 작동 주파수 범위 극대화
키사이트의 8490G 정밀 동축 고정 감쇠기는 낮은 SWR와 함께 업계를 선도하는 감쇠 정확도를 비롯하여 특정 요구에 맞는 다양한 감쇠 옵션을 제공하므로 최대 67 GHz까지 작동 주파수 범위를 극대화합니다. 3, 6, 10, 20, 30 및 40 dB 감쇠로 제공되는 8490G는 스웹프 주파수 테스트를 거쳐 모든 주파수에서 사양을 충족하는 것으로 확인되었습니다.
별도 배선에 사용되는 이 터미널 블록은 최대 20 AWG 와이어 크기(일반적인 경우) 또는 24 AWG(144개 라인이 모두 사용될 경우)를 지원합니다.
별도 배선에 사용되는 이 터미널 블록은 최대 20 AWG 와이어 크기(일반적인 경우) 또는 24 AWG(144개 라인이 모두 사용될 경우)를 지원합니다.
34934T
별도 배선에 사용되는 이 터미널 블록은 최대 20 AWG 와이어 크기(일반적인 경우) 또는 24 AWG(144개 라인이 모두 사용될 경우)를 지원합니다.
별도 배선에 사용되는 이 터미널 블록은 최대 20 AWG 와이어 크기(일반적인 경우) 또는 24 AWG(144개 라인이 모두 사용될 경우)를 지원합니다.
D-Sub 커넥터에 대한 행열 배선을 위한 유연한 옵션을 제공합니다.
D-Sub 커넥터에 대한 행열 배선을 위한 유연한 옵션을 제공합니다.
34934C
D-Sub 커넥터에 대한 행열 배선을 위한 유연한 옵션을 제공합니다.
이 구성 블록은 D-Sub 커넥터에 대한 행열 배선을 위한 유연한 옵션을 제공합니다.
유연한 이산 외부 배선 연결 방법을 제공합니다; 나사형 연결을 사용한 탈부착.
유연한 이산 외부 배선 연결 방법을 제공합니다; 나사형 연결을 사용한 탈부착.
34933T
유연한 이산 외부 배선 연결 방법을 제공합니다; 나사형 연결을 사용한 탈부착.
키사이트 34933T는 별도 배선에 사용되는 34933A 4x8 매트릭스 및 L4433A 4x8 매트릭스용 터미널 블록입니다. 지원되는 일반적인 와이어 크기는 연결이 100개 이하인 경우 최대 20 AWG, 100개 이상인 경우 24 AWG입니다. 다음 두 개의 터미널 블록은 34933A 모듈 및 L4433A 장비에 대한 배선 연결을 활용합니다.
34933T는 유연한 외부 배선 연결 방법을 제공하는 탈착식 터미널 블록입니다.
유연한 이산 외부 배선 연결 방법을 제공합니다; 나사형 연결을 사용한 탈부착.
유연한 이산 외부 배선 연결 방법을 제공합니다; 나사형 연결을 사용한 탈부착.
34924T
유연한 이산 외부 배선 연결 방법을 제공합니다; 나사형 연결을 사용한 탈부착.
키사이트 34924T는 이산 배선에 사용되는 34924A 70채널 리드(reed) 멀티플렉서용 터미널 블록입니다. 지원되는 와이어 크기는 연결이 100개 이하인 경우 최대 20 AWG, 100개 이상인 경우 24 AWG입니다. 두 개의 터미널 블록 옵션이 34924A 모듈에 대한 배선 연결을 활용합니다.
34924T는 유연한 외부 배선 연결 방법을 제공하는 탈부착식 터미널 블록입니다.
Allows you to flush, recess, or reverse mount up to two L4400 instruments per shelf while occupying one EIA rack unit of space
Allows you to flush, recess, or reverse mount up to two L4400 instruments per shelf while occupying one EIA rack unit of space
Y1160A
Allows you to flush, recess, or reverse mount up to two L4400 instruments per shelf while occupying one EIA rack unit of space
The Y1160A allows for mounting of the L4400 Series LXI instruments in EIA rack cabinet. The kit allows you to flush, recess, or reversemount up to two L4400 instruments per shelf while occupying one EIA rack unit of space.