Choose a country or area to see content specific to your location
무엇을 찾고 있습니까?
Bridging design and physical testing to evaluate drop, impact, shock, and vibration compliance before hardware exists.
Unlock your free upgrade to the next bandwidth tier.
Strengthen 1.6T network reliability for AI-scale workloads from transceivers to interconnects.
Pair Keysight VSA software with the new XA5 signal analyzer for advanced visualization, demodulation, and analysis — start your 30-day trial today.
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
Explore end-to-end workflows spanning IC design, validation, wafer test, and photonics.
Explore curated support plans, prioritized to keep you innovating at speed.
Maximize accuracy and performance with precision accessories engineered for Keysight instruments.
Explore dual-channel and ultra-wideband signal analysis for demanding RF workflows.
Get faster, clearer insights with our new multicore, 12-bit oscilloscope up to 33 GHz. Trade in your old oscilloscope and get credit toward a new XR8.
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
Hands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Success Stories
가장 빈번하게 발생하는 작업 관련 셀프 도움말에 빠르게 액세스할 수 있습니다
제품 요구 사항을 지원하는 추가 콘텐츠
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
No Filter available
No Filter available
DAQM910A
Keysight DAQM910A is a 20 Channel Multiplexer (2/4-wire) module with low voltage circuit protection and switching capability of up to 40 Vpk and built-in thermocouple reference junction.
The Keysight DAQM910A module data acquisition system is a low-voltage 20-channel multiplexer module. It combines dense, multifunction switching with 80-channel-per-second scan rates to address a broad spectrum of low-voltage data acquisition applications. You can mix two- and four-wire channels on the same module. Additional features include the following:
The standard product includes the following:
Please Note: Firmware version A.03 or above is required on DAQ970A and DAQ973A for compatibility with the DAQM910A.
M9048B
The M9048B is a PCIe Host Adapter (with one Gen 3 x8 PCIe cable link capable of achieving speeds up to 8 GB/s) for desktop or rack-mounted external computers.
The M9048B is a PCIe host interface card for computers with PCIe expansion slots. It provides a high performance link from an external computer to an AXIe or PXIe Chassis. The card has a Gen 3 x8 PCIe cable link capable of achieving speeds up to 8 GB/s. This means a high performance system can be built using desktop or rack-mounted computers.
The M9048B utilizes a PCIe switch and clock isolation to provide a high quality clock source driven down the PCIe cable to the PXIe or AXIe chassis. Therefore, it always provides the same high-performance PCIe link regardless of the PC that it’s placed in.
The card utilizes an x8 Molex cable connector and should be used with x8 to x8 PCIe cables tested to operate at Gen 3 speeds such as the Keysight Y1202A or Y1203A. Operation is transparent to the software application and no software drivers are required.
M9022A
The M9022A PXI System Module provides a high data BW connection between the host PC and the chassis when it is combined with an appropriate host adapter.
The M9022A is a PXIe System Module and is installed in the system slot of a PXIe chassis. When combined with an appropriate host adapter, it will provide a high data BW connection between the host PC and the chassis. The module can also be used with an M9037A PXIe embedded controller to interconnect two chassis in a multi-chassis system.
To ensure the best performance, the M9022A should be paired with a Gen 3 x8 Host PC card such as the Keysight M9048B. An x8 PCIe cable tested to operate at Gen 3 speeds such as the Keysight Y1202A or Y1203A should also be used.
34945EXT
L4445A 마이크로파 스위치/감쇠기 드라이버에 대한 확장 채널을 활성화합니다; 각 64개 코일에 대해 하나가 필요합니다
34945EXT 확장자 보드는 34945A와 L4445A에 사용됩니다. 각 64개 코일에 대해 하나가 필요합니다.
Y1132A
Extends the backplane of the 34980A switch/measure unit outside the instrument’s frame for easy servicing of plug-in modules
The Y1132A extends the backplane of the Keysight 34980A Multifunction Switch/Measure Unit outside the instrument’s frame for easy servicing of plug-in modules. The accessory consists of a backplane extender module, which you install in the 34980A, and an external probing board, which connects to the extender module via two ribbon cables provided.
For more information about, please visit Keysight Multifunction Switch / Measure Mainframe and Modules
M9300A
M9300A PXIe 주파수 레퍼런스는 키사이트 M9301A 신디사이저, M9310A 소스 출력 및 M9311A 모듈레이터와 함께 사용해서 세계에서 가장 빠른 벡터 신호 생성기, M9381A를 만들 수 있는 소형의 모듈식 PXIe 호환 계측기입니다.
M9300A PXIe 주파수 레퍼런스는 키사이트 M9301A 신디사이저, M9310A 소스 출력 및 M9311A 모듈레이터와 함께 사용해서 세계에서 가장 빠른 벡터 신호 생성기, M9381A를 만들 수 있는 소형의 모듈식 PXIe 호환 계측기입니다. M9300A와 M9301A 및 M9310A를 결합해 CW 소스, M9380A를 만들거나 다른 PXI 솔루션과 함께 10-MHz 또는 100-MHz 레퍼런스로 사용하십시오. 선택한 어플리케이션 개발 환경에 맞게 조정된 소프트 프론트 패널과 프로그래밍 방식 인터페이스를 통해 계측기를 제어하십시오.
Y1213A
Provides five single-slot PXI filler panels with EMC gaskets
The Y1213A provides five, single-slot PXI filler panels with EMC gaskets.
Y1215C
Suspends the chassis in a Keysight rack using only 4 U of rack space
Y1215C는 M9018B와 M9019A PXIe 섀시를 위한 전체 랙 마운팅 키트가 필요합니다. 랙 플랜지, 핸들 및 부착 하드웨어를 포함합니다. 4U 랙 공간만 사용하는 키사이트 랙에서 섀시를 매달고 있습니다. 이 키트는 Y1270A 전면판 인터페이스 키트와 호환되지 않습니다.
랙 레일은 타사 랙에 필요할 수 있으며 별도로 주문합니다. 레일을 사용하는 경우 섀시는 5U 랙 공간이 필요합니다.
M9341A
24비트 디지털 I/O 커넥터와 트리거링 포트가 있는 M9341A 디지털 I/O는 동일한 PXI 섀시에 설치되어 있는 PXI 벡터 네트워크 분석기(VNA)와 외부 핸들러 간 통신 신호를 제공합니다.
24비트 디지털 I/O 커넥터와 트리거링 포트가 있는 M9341A 디지털 I/O는 동일한 PXI 섀시에 설치되어 있는 PXI 벡터 네트워크 분석기(VNA)와 외부 핸들러 간 통신 신호를 제공합니다. 이렇게 해서 키사이트 M937xA와 M9485A 같은 PXI VNA를 자동 테스트 환경에서 사용할 수 있습니다.
M9341A 디지털 I/O는 PNA 및 ENA 시리즈 같은 키사이트 VNA의 후면판에 있는 24비트 디지털 I/O 커넥터와 호환됩니다.
Y1202A
Use to connect a PXIe or AXIe chassis to a desktop or rackmount computer
The Y1202A PCIe cable is primarily used to connect a PXIe or AXIe chassis to a desktop or rack-mount computer. Hence, it is the perfect companion to the Keysight M9048A, M9048B, and M9049A.
Y1212A
Improve airflow by inserting plastic slot blockers into empty PXI slots
Y1212A는 모든 PXI 섀시에 사용할 수 있는 5개의 플라스틱 슬롯 블로커 키트입니다. 이들은 PXI 모듈을 통해 공기 흐름을 개선하기 위해 빈 슬롯에 배치할 수 있습니다. 빈 PXI 필러 패널 사용이 필요합니다.
M9377A
M9377A는 M9485A PXIe 멀티포트 벡터 네트워크 분석기에서 사용하는 1포트 PXIe 벡터 네트워크 분석기 직접 액세스 수신기입니다
M9377A는 M9485A PXIe 멀티포트 벡터 네트워크 분석기에서 사용하는 1포트 PXIe 벡터 네트워크 분석기 직접 액세스 수신기입니다.