Choose a country or area to see content specific to your location
Können wir Ihnen behilflich sein?
-
-
3D Interconnect Designer
3D Interconnect Designer provides a flexible modeling and optimization environment for any advanced interconnect structure, including chiplets, stacked die, packages, and PCBs.
-
Save up to 50% on an XR8 Oscilloscope
Get faster digital validation for less with a trade-in.
-
Discover Keysight AI Data Center Builder
Emulate every part of your data center infrastructure. Emulate Anything. Optimize Everything.
-
Accelerate Signal Analysis with X-Series Measurement Applications
Use 25+ X-Series applications to analyze, demodulate, and troubleshoot signals across wireless, aerospace/defense, EMI, and phase noise.
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Precision In-Circuit Testing for Production
Achieve fast, accurate board-level testing with robust inline and offline ICT designed for modern manufacturing.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
-
Stream 120 MHz I/Q Data to Your Laptop in the FieldPinpoint interference with post-processing spectrum management software in the lab.
Find the Right ATE Power SolutionUse this selector tool to quickly identify the best power supply for your aerospace and defense ATE requirements.
-
- Solutions
-
Explore engineer-authored content and a vast knowledge base with thousands of learning opportunities.
FeaturedKeysight Learn offers immersive content on topics of interest, including solutions, blogs, events, and more.
- Buy
-
Quick access to the most frequent support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
All Software Catalog
Use the filters below to find the software for your specific instrument
Showing 12 of 1282
-
2
-
423
No Filter available
FlexDCA Sampling Oscilloscope Software
The FlexDCA Sampling Oscilloscope Software N1010A runs Keysight’s digital communication analyzer (DCA) of sampling oscilloscopes with a new user interface.
The FlexDCA Sampling Oscilloscope Software N1010A runs Keysight’s digital communication analyzer (DCA) of sampling oscilloscopes with a new user interface.
FlexDCA Sampling Oscilloscope Software
N1010A
The FlexDCA Sampling Oscilloscope Software N1010A runs Keysight’s digital communication analyzer (DCA) of sampling oscilloscopes with a new user interface.
Keysight’s N1010A FlexDCA is the software that runs Keysight’s digital communication analyzer (DCA) family of sampling oscilloscopes (also known as equivalent-time oscilloscopes). A DCA is an instrument that helps visualize and analyze the analog properties of high-speed signals such as those used in wireline telecom and data center links.
FlexDCA is installed at the factory on DCA-X mainframes but can also be installed on a PC to control a DCA-M or remotely control a DCA-X.
- Powerful and flexible capability: Basic measurements are built in, and you can add packages as needed.
- Consistent results: Use in design to simulate and analyze signals, in the lab to characterize prototypes, and in production and support to operate equipment remotely.
In addition to the data acquisition and basic measurement capabilities the N1010A FlexDCA software provides, Keysight offers a large selection of software tools with powerful capabilities:
- N1010100A, research and development package for the FlexDCA sampling oscilloscope software: This package is intended for R&D engineers who want to characterize their designs and gain more insight into why a signal deviates from the expected performance.
- N1010200A, manufacturing package for the FlexDCA sampling oscilloscope software: This package focuses on cost of test in optical transceiver manufacturing applications with capabilities such as FlexEye that enhance measurement flexibility. It includes measurements such as TDECQ.
- N1010300A, signal integrity package for the FlexDCA sampling oscilloscope software: This package adds powerful tools to measure impedances, transfer characteristics, and S-parameter calculations to the basic TDR / TDT measurements.
For a mapping of legacy FlexDCA feature-based options to each of the software packages available and a summary of system requirements and supported instruments, click here for software package details.
Protocol Development Kit
Protocol Development Kit
Protocol Development Kit
Protocol Development Kit
B4641A
Protocol Development Kit
Signal Generator Virtual Instrument Simulation Software
Provide configurable Signal Generator (SG) Virtual Instrument (VI) with basic hardware emulation and SCPI programming capability as Keysight M9484C VXG/N5186A MXG vector signal generators and N5185A MXG analog signal generator.
Provide configurable Signal Generator (SG) Virtual Instrument (VI) with basic hardware emulation and SCPI programming capability as Keysight M9484C VXG/N5186A MXG vector signal generators and N5185A MXG analog signal generator.
Signal Generator Virtual Instrument Simulation Software
N7688SIMC
Provide configurable Signal Generator (SG) Virtual Instrument (VI) with basic hardware emulation and SCPI programming capability as Keysight M9484C VXG/N5186A MXG vector signal generators and N5185A MXG analog signal generator.
- Various platforms available for instrument simulation: M9484C VXG, N5186A MXG vector signal generators and N5185A MXG analog signal generator
- Configurable whole set of options before virtual instrument launch
- Basic hardware emulation with configurable options (free)
- Graphic user interface for all general functions and embedded applications (free)
- SCPI programming capability (require N7688SIMC license)
Time-Domain Analysis
Measure the time-domain response of a device; transform frequency-domain data to the time domain or time-domain data to the frequency domain.
Measure the time-domain response of a device; transform frequency-domain data to the time domain or time-domain data to the frequency domain.
Time-Domain Analysis
S95010B
Measure the time-domain response of a device; transform frequency-domain data to the time domain or time-domain data to the frequency domain.
- fully error-corrected time-domain reflection or transmission response
- gating available to remove unwanted responses (e.g., from test fixtures)
- transform frequency domain to the time domain or time domain to the frequency domain
- beneficial in tuning many filter types, including cavity-resonator filters
The time-domain capability allows you to measure the time-domain response of a device. The analyzer can transform frequency-domain data to the time domain or time-domain data to the frequency domain.
The transform used by the analyzer resembles time-domain reflectometry (TDR) measurements. TDR measurements, however, are made by launching an impulse or step into the test device and observing the response in time with a receiver, similar to an oscilloscope. In contrast, the analyzer makes swept frequency response measurements and mathematically transforms the data into a time-domain reflectometer-like display.
PW1-class Pulse Generator, Arbitrary Noise Generator
The 81150A pulse function arbitrary noise generator is a high precision pulse generator with signal generation, modulation, and distortion capabilities.
The 81150A pulse function arbitrary noise generator is a high precision pulse generator with signal generation, modulation, and distortion capabilities.
PW1-class Pulse Generator, Arbitrary Noise Generator
81150A
The 81150A pulse function arbitrary noise generator is a high precision pulse generator with signal generation, modulation, and distortion capabilities.
Ein integriertes Messgerät für präzise und vielseitige Tests
Der Puls-/Funktions-/Arbiträrsignal-/Rauschgenerator Keysight 81150A ist ein hochgradig präziser Pulsgenerator, erweitert durch vielseitige Signalerzeugungs-, Modulations- und Verzerrungsfunktionen, um Ihr Bauteil an die Grenzen zu bringen. (Dieselben integrierten Funktionen mit einer Impulsfrequenz von bis zu 330 MHz und Sinusfrequenz von bis zu 500 MHz finden Sie beim Keysight 81160A.)
- Der Pulsgenerator garantiert reproduzierbare Tests mit präzisen Signalen und unübertroffener Timing-Stabilität
- Der Rauschgenerator kombiniert zwei erforderliche Extreme: Zufälliges Rauschen und wiederholbares Rauschen mit sehr langen Wiederholraten, um die Problemermittlung zu vereinfachen
- Der Arbiträrsignalgenerator bietet vielseitige Signale und Modulationsfunktionen, mit denen das Signal an Ihre Bauteilanforderungen angepasst werden kann
- Der arbiträre bitförmige Mustergenerator (optional) ermöglicht ideale und verzerrte Muster mit bis zu 120 Mbit/s
Nemo Outdoor 5G NR Drive Test Solution
Nemo Outdoor is a laptop-based drive test tool for wireless network testing.
Nemo Outdoor is a laptop-based drive test tool for wireless network testing.
Nemo Outdoor 5G NR Drive Test Solution
NTA50000B
Nemo Outdoor is a laptop-based drive test tool for wireless network testing.
Understand performance and quality of mobile networks (QoS and QoE testing) and optimize it for improved end-user satisfaction and increased Average Revenue Per User (ARPU)
Drive testing solution for measurement of air interface parameters in 2G to 5G NR mobile networks
- Enables to measure real end-user quality of experience (QoE)
- Supports all stages of mobile network life cycle, from rollout, optimization and benchmarking, to network monitoring and control
- Collects data for comprehensive post-processing and analytics insights
- Connects to the diagnostics interface of a mobile phone for full modem readings, including RF, full L1-L3 details, and signaling messages
- Automated mobile network quality-of-service (QoS) measurements with extensive scripts
- Benchmarking solution with advanced analytics for easy comparison of IoT and 2G-5G devices and networks
- Easy to set up, configure and use
- Extremely robust and reliable solution
Advanced troubleshooting capabilities
- Qualcomm, Samsung, and MediaTek diagnostic data logging
- Missing neighbor detection, pilot pollution, co-channel and adjacent channel interference analysis
- Mobile band and blind scan
- Automatic base station location detection
- Over 4000 statistical calculations of L1-L3 radio KPIs
Scalable
- Connect up to 60 smartphones to one laptop with Nemo Network Benchmarking Solution (NBM)
- For indoor walk testing with a backpack, supports up to 18 simultaneous test devices with one PC
- Supports the latest 5G NR and LTE smartphones, IoT devices and 5G NR scanners in the market
- Verified with over 300 different test device models
- Advanced OTT application testing capabilities with multiple simultaneous test devices
- Supports data and voice measurements with non-rooted, off-the-shelf commercial phones
Verify consumer QoE with real native applications running in the phone
- Network Performance Score (NPS) measurements
- Advanced artificial intelligence (AI) and machine learning (ML)-driven application testing automation features
- Advanced YouTube video testing
- Application Quality of Experience (QoE) testing using the same native applications that real customers use, including Facebook, WhatsApp, Telegram, Signal, Dropbox, Viber, BiP, and Line application testing
- Agnet - mission-critical push-to-talk (PTT) application testing
- Voice quality testing for WhatsApp calls
- TWAMP (Two-Way Active Measurement Protocol) testing for more accurate round-trip metrics, such as RTT and jitter
Widest range of 5G NR KPIs on the market
- 5G NR support with Qualcomm (X85, X80, X75, X71, X62, and X35 (RedCap)), Samsung Exynos (5400, 5328, 5153, and 2600), and MediaTek (M60 RedCap, M90) modem-based devices, and 3rd party scanning receivers
- Support for 5G NR standalone (SA) and non-standalone (NSA) mode, and 5G mmWave/sub-6 carrier aggregation testing
- Collects 5G NR beam specific KPIs
- Supports massive MIMO (mMIMO) drive tests and field measurements
- Support for Dynamic Spectrum Sharing (DSS) measurements
- Possibility to visualize 5G NR beams in 3D using Nemo Analyze
- NB-IoT and LTE-M support for both Qualcomm and Neul IoT chipset based devices
- LTE and LTE-A (Cat 6-18, VoLTE/ ViLTE, VoWiFi/ViWiFi, and eMBMS testing), HSPA+ DC, WCDMA, GSM, TETRA
- Support for POLQA and VISQOL voice quality testing and PEVQ-S and Keysight’s Streaming Experience Quality Inspector video streaming analysis
Full range of accessories for drive testing and benchmarking needs
- Nemo Intelligent Device Interface (NIDI) provides reliable measurements with integrated battery eliminator. Integrated soundcard enables audio MOS measurements.
- Two different sized roof top box models enable drive testing so that phones are outside the car cabin
- Window and table mounting kits
- Lightweight Nemo Backpack Pro solution for walk testing with up to 18 devices. Offers free OTA RF reception and radiation for all test phones.
Drive testing of 2G, 3G, 4G, and 5G NR mobile networks
Nemo Outdoor is a laptop-based drive test tool for 2G, 3G, 4G, and 5G NR mobile network testing which supports over 300 devices and scanning receivers, from various vendors, all the latest network technologies and latest smartphones. Nemo Outdoor offers a full drive test solution for wireless network testing / mobile network testing, troubleshooting, and optimization.
In mobile network testing, Nemo Outdoor’s powerful software platform works with all wireless technologies and with different protocol and application testing options. Nemo Active Testing Application (NATA), the optional Keysight proprietary communications interface, enables simple and productive deployment of smartphones, also non-rooted commercial phones, in data benchmarking and voice quality measurements. With a test terminal and/or a scanner you can perform real-time DSS measurements, missing neighbor detection, pilot pollution analysis, and GSM interference analysis. In addition, with the advanced mobile band scan feature, Nemo Outdoor continuously scans for pilot channels from specified bands and automatically adds them for pilot scanning.
Ensuring wireless network quality for end-users
Nemo Outdoor enables to measure quality-of-experience (QoE) metrics for the services and applications your customers are using, including advanced application test automation capabilities. With the optional NATA functionality, the smartphone measurement results reflect the real end-user experience. This gives customers the capability to understand wireless network quality from end consumer perspective, troubleshoot and optimize the network based on the results, ultimately improving customer satisfaction and reducing churn.
Nemo Outdoor for real 5G NR field measurements
Nemo Outdoor offers the widest range of 5G NR KPIs on the market and support for both 5G NR standalone (SA) and non-standalone (NSA) mode, 5G NR forcing features and for 5G NR carrier aggregation testing. Nemo Outdoor supports real 5G NR field measurements with Qualcomm (Qualcomm X85, X80, X75, X71, X62, and X35 (RedCap)), Samsung Exynos (5400, 5328, 5153, and 2600), HiSilicon Balong 5000, and MediaTek (M60 RedCap, M90) modem-based devices and 3rd party scanning receivers. The collected metrics include cell measurements, physical channel information, current cell information (for each 5G subcarrier), extensive set of RACH parameters, MAC layer KPIs, RLC/PDCP KPIs, and link adaptation (for each 5G subcarrier) KPIs. In addition, Nemo Outdoor collects 5G QoS measurements including throughputs from different layers and latency.
With scanning receivers, Nemo Outdoor can be used to perform 5G NR drive test measurements with the demodulation of the 5G NR reference signals and it enables simultaneous 2G, 3G, 4G, and 5G NR spectrum scan and frequency scan (CW) measurements. Coverage and quality metrics, namely SS-RSRP, SS-RSRQ, SS-CINR, and RSSI, are reported per each SSB reference beam of a cell.
HDMI Electrical Performance, Validation, and Compliance Test Software
Electrical Performance, Validation, and Compliance Test Software for HDMI Transmitter
Electrical Performance, Validation, and Compliance Test Software for HDMI Transmitter
HDMI Electrical Performance, Validation, and Compliance Test Software
D9021HDMC
Electrical Performance, Validation, and Compliance Test Software for HDMI Transmitter
- Complete test suites for HDMI: HDMI1.4, HDMI2.1 TMDS (previously HDMI2.0), HDMI 2.1 Fixed Rate Link, HDMI 2.2 Fixed Rate Link, Direct-Attach devices.
- Supports waveform storage for post-processing on scope or offline on a PC.
- Device capability entry using resolution and timing descriptors, video identifier codes (VIC) as well as FRL features
- Automated test sequencing for given test connection
- Full device automation using optional switch network
- Guided connection and instructions throughout the test process
- Test report including system, connection details, summary table, with hotlinks to ancillary test result data, and screen shots of the test measurements
- Tabular final results page with statistical analysis
The D9021HDMC electrical performance validation and compliance software for HDMI transmitter supporting Infiniium V, Z and UXR-Series oscilloscopes gives you a fast and easy way to verify and debug your High Definition Multi-media Interface (HDMI) designs for set-top boxes, Digital Video Recorders, DVD players, and motherboard systems. The HDMI compliance test software lets you automatically execute HDMI electrical checklist tests and displays the results in a comprehensive report format. In addition to the measurement data, the report provides a margin analysis that shows how closely your device passed or failed each test.
This software supports post processing of waveforms to greatly improve productivity. Post processing can be done on the oscilloscope after waveforms have been acquired or on a PC with a licensed compliance application using Infiniium Offline D9010BSEO. Other required components for solution are: a test point adapter with HDMI plug (TPA-P), probe amplifiers and probe heads, high quality matched cables, and an EDID and SCDC controller device.
HDMI2.1 TMDS (formally HDMI2.0) HDMI2.1 FRL and HDMI2.2 FRL require single-ended connections for single-ended measurements as well as for TP2 differential measurements. Keysight probe and switching offerings include N7010A active termination adapters for the lowest cost connection or N7003A Infiniimode amplifiers with internal switches to enable one connection full FRL testing. Full automation for complete testing of all HDMI versions for a device is possible with switch matrix solution which requires a mainframe and switch modules. To learn more about Keysight’s automated switching solution, visit www.keysight.com/find/switching.
Power Analysis Software for the InfiniiVision HD3 Series Oscilloscope
The power software package for Keysight’s InfiniiVision HD3 Series oscilloscopes enables a broad range of automated power supply characterization measurements including critical frequency response measurements such as power supply rejection ratio (PSRR) and control loop response.
The power software package for Keysight’s InfiniiVision HD3 Series oscilloscopes enables a broad range of automated power supply characterization measurements including critical frequency response measurements such as power supply rejection ratio (PSRR) and control loop response.
Power Analysis Software for the InfiniiVision HD3 Series Oscilloscope
HD300PWRA
The power software package for Keysight’s InfiniiVision HD3 Series oscilloscopes enables a broad range of automated power supply characterization measurements including critical frequency response measurements such as power supply rejection ratio (PSRR) and control loop response.
Input Measurements
- Power quality: Real power, apparent power, reactive power, power factor, crest factor (V and I), phase angle
- Current harmonics (based on IEC 61000-3-2 up to the 40th harmonic)
- Inrush current
Switching Measurements
- Rds-on and Vce-sat
- Switching loss (power and energy)
- Slew rate (dv/dt and di/dt)
- Modulation (duty cycle, pulse-width, period, frequency, etc., versus time plot)
Output Measurements
- Output ripple
- Turn-on / turn-off time
- Transient response time
- Efficiency
Frequency Response Measurements
- Power supply rejection ratio (PSRR) – Bode
- Control loop response – Bod
The power software package for Keysight’s InfiniiVision HD3 Series oscilloscopes enables a broad range of automated power supply characterization measurements including critical frequency response measurements such as power supply rejection ratio (PSRR) and control loop response.
PCI Express 5.0 Transmitter Electrical Performance Validation and Compliance Software
Find how to use the PCIe 5.0 Tx compliance software to test, debug and characterize your PCIe 5.0 designs quickly and easily. The Keysight PCIe compliance software configures the oscilloscope and generates an HTML report automatically.
Find how to use the PCIe 5.0 Tx compliance software to test, debug and characterize your PCIe 5.0 designs quickly and easily. The Keysight PCIe compliance software configures the oscilloscope and generates an HTML report automatically.
PCI Express 5.0 Transmitter Electrical Performance Validation and Compliance Software
D9050PCIC
Find how to use the PCIe 5.0 Tx compliance software to test, debug and characterize your PCIe 5.0 designs quickly and easily. The Keysight PCIe compliance software configures the oscilloscope and generates an HTML report automatically.
- PCI Express TX analysis of PCIe 5.0 Signals at speeds up to 32 GT/s
- Uncorrelated Jitter, Preset Testing, Uncorrelated PWJ and more
- Configurable pass/fail margin reporting
- HTML Summary Report
Use the PCIe 5.0 Tx compliance software to test, debug and characterize your PCIe Gen5 designs quickly and easily. It automatically configures the oscilloscope for each test and generates an informative HTML report upon test completion. The application compares the results with the specification test limit and includes margin analysis which indicates how closely the device passes or fails each test. With the option InfiniiSim Waveform Transformation Toolset, the software supports integrated de-embedding of the breakout channel of the test fixture.
Jitter, Vertical And Phase Noise Analysis Software For Infiniium 90000, V-, Z- And UXR-Series Oscilloscopes
EZJIT Software for 90000/V-/Z-/UXR-Series Oscilloscopes
EZJIT Software for 90000/V-/Z-/UXR-Series Oscilloscopes
Jitter, Vertical And Phase Noise Analysis Software For Infiniium 90000, V-, Z- And UXR-Series Oscilloscopes
D9020JITA
EZJIT Software for 90000/V-/Z-/UXR-Series Oscilloscopes
Jitter Analysis Provides
- Automatic setup wizard for creating jitter histograms, trends, and spectrums
- Automatic setup wizard for RJ/DJ separation via multiple algorithms, pattern lengths, BER levels
- Multiple clock recovery methods
- Calibration to remove RJ from oscilloscope
- Composite histograms and graphs of separated RJ, PJ, DJ, DDJ, DCD and ISI jitter subcomponents
- Composite histograms and graphs of separated TI, DDI, PI, ISI noise subcomponents
- Spectral and noise BER bathtubs
Phase Noise Analysis Provides
- Plotting Single Side Band (SSB) phase noise as log frequency vs dBc/Hz
- Using 2 channels and cross-correlation to reduce broadband measurement noise.
- Measure phase noise of differential clocks with reduced broadband measurement noise.
- Measure phase noise of spread-spectrum modulated clocks.
- Reduce broadband noise (RJ) in cross-correlated time interval error (TIE) measurements.
- Measure integrated jitter between two frequencies on phase noise plot.
- Measure phase noise in circuit with InfiniiMax probes.
With faster edge speeds and shrinking data valid windows in today's high-speed digital designs, insight into the causes of jitter has become critical for success. This jitter analysis software, combined with Keysight's Infiniium 90000, V-, Z- or UXR-Series oscilloscopes, is a key tool for identifying and quantifying jitter components that affect the reliability of your design. Time correlation of jitter to the real-time signal makes it easy to trace jitter components to their sources. Additional compliance views and a measurement setup wizard now simplify and automate RJ/DJ separation for testing against industry standards.
This software automatically detects embedded clock frequencies and repetitive patterns of the data on the oscilloscope inputs and calculates the level of data-dependent jitter (DDJ) that is contributed to the total jitter (TJ) PDF by each transition in the pattern. It also comes with both spectral and tail-fit jitter separation algorithm.
Every waveform is different. As a result, having the flexibility of multiple jitter separation solutions means better answers for each individual waveform. Use the new tail-fit algorithm to properly identify and measure aperiodic bounded uncorrelated jitter, which is especially useful if the waveform is being influenced by cross-talk.
The phase noise analysis feature measures phase noise in a clock source. Phase noise measurement results are presented in a log frequency plot where the amplitude units are dBc/Hz (decibels relative to the carrier power normalized to a 1 Hz bandwidth). Phase noise is one of the most important figures of merit of a signal generating device and can be a limiting factor in a mission-critical application within aerospace and defense, as well as in communications.
Jitter, Vertical and Phase Noise Analysis Software for Infiniium 9000, S-, EXR-, MXR-Series Oscilloscopes
Jitter and Vertical Noise Analysis for 9000, S-Series, EXR-Series, and MXR-Series Oscilloscopes.
Jitter and Vertical Noise Analysis for 9000, S-Series, EXR-Series, and MXR-Series Oscilloscopes.
Jitter, Vertical and Phase Noise Analysis Software for Infiniium 9000, S-, EXR-, MXR-Series Oscilloscopes
D9010JITA
Jitter and Vertical Noise Analysis for 9000, S-Series, EXR-Series, and MXR-Series Oscilloscopes.
Today's high-speed digital designs require insight into the causes of jitter. Phase noise, one of the most important figures of merit of a signal generating device, can be a limiting factor in mission-critical applications like aerospace and defense communications.
This software helps you perform jitter, vertical, and phase noise analysis with Keysight's Infiniium 9000, S-Series, EXR-Series, MXR-Series oscilloscopes.
Time correlation of jitter to the real-time signal helps you easily trace jitter components to their sources. Additional compliance views and a measurement setup wizard now simplify and automate RJ/DJ separation for testing against industry standards.
This software automatically detects embedded clock frequencies and repetitive patterns of the data on the oscilloscope inputs and calculates the level of data-dependent jitter (DDJ) that is contributed to the total jitter (TJ) PDF by each transition in the pattern. It also comes with both spectral and tail-fit jitter separation algorithm. Since every waveform is different, multiple jitter separation solutions give you better answers for each individual waveform. Use the new tail-fit algorithm to properly identify and measure aperiodic bounded uncorrelated jitter, which is especially useful if the waveform is being influenced by cross-talk.
The Phase Noise analysis feature measures phase noise in a clock source. Get measurement results presented in a log frequency plot where the amplitude units are listed in units of dBc/Hz (decibels relative to the carrier power normalized to a 1 Hz bandwidth).
Jitter Analysis Provides
- Automatic setup wizard for creating jitter histograms, trends, and spectrums
- Automatic setup wizard for RJ/DJ separation via multiple algorithms, pattern lengths, BER levels
- Multiple clock recovery methods
- Calibration to remove RJ from oscilloscope
- Composite histograms and graphs of separated RJ, PJ, DJ, DDJ, DCD and ISI jitter subcomponents
- Composite histograms and graphs of separated TI, DDI, PI, ISI noise subcomponents
- Spectral and noise BER bathtubs
Phase Noise Analysis Provides
- Single Side Band (SSB) phase noise plots as log frequency vs. dBc/Hz
- Two channels and cross-correlation to reduce broadband measurement noise
- Differential clocks with reduced broadband measurement noise
- Spread-spectrum modulated clocks
- Broadband noise (RJ) reduction in cross-correlated time interval error (TIE) measurements
- Integrated jitter measurements between two frequencies on phase noise plot
- In circuit with InfiniiMax probes
Modulation Distortion up to 50 GHz
Provides nonlinear DUT behavior (EVM, NPR, and ACPR) under modulated stimulus conditions.
Provides nonlinear DUT behavior (EVM, NPR, and ACPR) under modulated stimulus conditions.
Modulation Distortion up to 50 GHz
S930705B
Provides nonlinear DUT behavior (EVM, NPR, and ACPR) under modulated stimulus conditions.
- Provides nonlinear DUT behavior (EVM, NPR, and ACPR) under modulated stimulus conditions
- Vector error correction and VNA calibration reduce error and provide very low residual system EVM
- Frequency coverage up to 50 GHz
- Coherent measurements with multiple receivers provide fast measurements
S930705B enables fast and accurate active-device modulation distortion characterization under modulated stimulus condition up to 50 GHz. The wide dynamic range and vector error correction of the PNA-X result in an extremely low residual EVM of the test setup, so you can get a complete picture of your device’s performance without test system interference. S930704B can measure EVM, NPR, ACPR, and can decompose nonlinear signals and linear signals with the spectral correlation between input and output spectrum without doing demodulation. Integration with the PNA-X SCCM provides quick modulation distortion measurements while making other VNA measurements.
A signal generator connected to the PNA-X provides the modulated stimulus. Supported signal generators: VXG (M9383B/84B), M9383A, PSG + M8190A, MXG, or UXG with U3039ACK1
Learn more about Microwave Signal Generator (VXG).
