Choose a country or area to see content specific to your location
What are you looking for?
-
-
3D Interconnect Designer
3D Interconnect Designer provides a flexible modeling and optimization environment for any advanced interconnect structure, including chiplets, stacked die, packages, and PCBs.
-
Save up to 50% on an XR8 Oscilloscope
Get faster digital validation for less with a trade-in.
-
Discover Keysight AI Data Center Builder
Emulate every part of your data center infrastructure. Emulate Anything. Optimize Everything.
-
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Precision In-Circuit Testing for Production
Achieve fast, accurate board-level testing with robust inline and offline ICT designed for modern manufacturing.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
448 Gb/s Waveform Generation
Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.
-
Stream 120 MHz I/Q Data to Your Laptop in the FieldPinpoint interference with post-processing spectrum management software in the lab.
Find the Right ATE Power SolutionUse this selector tool to quickly identify the best power supply for your aerospace and defense ATE requirements.
-
- Solutions
-
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
FeaturedHands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Success Stories
HPE Juniper Networking Builds Next-Gen AI Infrastructure - Buy
-
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
All Software Catalog
Explore the complete portfolio of Keysight software, from design engineering tools to emulator and instrument software, built to extend and enhance your Keysight instruments. Whether you are configuring measurements, automating tests, analyzing data, or validating compliance, use the filters below to identify the right software to support your workflow — from design and validation through manufacturing and deployment.
Showing 12 of 1289
-
419
No Filter available
FlexDCA Sampling Oscilloscope Software
The FlexDCA Sampling Oscilloscope Software N1010A runs Keysight’s digital communication analyzer (DCA) of sampling oscilloscopes with a new user interface.
The FlexDCA Sampling Oscilloscope Software N1010A runs Keysight’s digital communication analyzer (DCA) of sampling oscilloscopes with a new user interface.
FlexDCA Sampling Oscilloscope Software
N1010A
The FlexDCA Sampling Oscilloscope Software N1010A runs Keysight’s digital communication analyzer (DCA) of sampling oscilloscopes with a new user interface.
Keysight’s N1010A FlexDCA is the software that runs Keysight’s digital communication analyzer (DCA) family of sampling oscilloscopes (also known as equivalent-time oscilloscopes). A DCA is an instrument that helps visualize and analyze the analog properties of high-speed signals such as those used in wireline telecom and data center links.
FlexDCA is installed at the factory on DCA-X mainframes but can also be installed on a PC to control a DCA-M or remotely control a DCA-X.
- Powerful and flexible capability: Basic measurements are built in, and you can add packages as needed.
- Consistent results: Use in design to simulate and analyze signals, in the lab to characterize prototypes, and in production and support to operate equipment remotely.
In addition to the data acquisition and basic measurement capabilities the N1010A FlexDCA software provides, Keysight offers a large selection of software tools with powerful capabilities:
- N1010100A, research and development package for the FlexDCA sampling oscilloscope software: This package is intended for R&D engineers who want to characterize their designs and gain more insight into why a signal deviates from the expected performance. It includes FlexRT Advanced for optical measurements on UXR-Series Oscilloscopes.
- N1010200A, manufacturing package for the FlexDCA sampling oscilloscope software: This package focuses on cost of test in optical transceiver manufacturing applications with capabilities such as FlexEye that enhance measurement flexibility. It includes measurements such as TDECQ and FlexRT Basic for optical measurements on UXR-Series Oscilloscopes.
- N1010300A, signal integrity package for the FlexDCA sampling oscilloscope software: This package adds powerful tools to measure impedances, transfer characteristics, S-parameter calculations to the basic TDR / TDT measurements, and FlexPLL for phase-locked loop measurements.
- FlexOTO, FlexOTO software is designed for high optical lane count testing on 800G/1.6T and multi-channel applications to improve test efficiency and increase utilization of DCA-M hardware without compromising measurement integrity.
For a mapping of legacy FlexDCA feature-based options to each of the software packages available, refer to DCA Configuration Guide under N1010x00A Analysis Packages mapping table.
GDDR7 Transmitter Compliance Test Software
The D9370GDDC GDDR7 Transmitter Compliance Test Software provides fast, easy clock, electrical, and timing measurements to test, debug, and characterize GDDR7 devices per JEDEC requirements
The D9370GDDC GDDR7 Transmitter Compliance Test Software provides fast, easy clock, electrical, and timing measurements to test, debug, and characterize GDDR7 devices per JEDEC requirements
GDDR7 Transmitter Compliance Test Software
D9370GDDC
The D9370GDDC GDDR7 Transmitter Compliance Test Software provides fast, easy clock, electrical, and timing measurements to test, debug, and characterize GDDR7 devices per JEDEC requirements
- Intuitive setup wizard for quick test setup, configuration, and test.
- Powerful characterization through multiple trials that show a full array of statistics for each measurement and returns the worst measurement value.
- Comprehensive test coverage of the GDDR7 electrical, timing, eye diagram and jitter tests.
- Offline testing capability with waveform files for completeness of simulation to validation workflow.
- De-embed interposer, cable and even package models to verify the true device performance.
- Cutting-edge equalization emulation using Keysight's built-in equalization analysis, including auto tap setup with multiple optimization algorithms, to accurately determine and simulate ideal DFE settings for a trained GDDR7 memory system.
- Signal-to-Noise and Distortion Ratio (SNDR) measurements to evaluate PAM signaling performance in the presence of crosstalk and other system impairment sources
Automotive Ethernet Channel Compliance Software
The AE6910L Automotive Ethernet Channel Compliance Software provides an automated way to test connectors, cables, or harnesses of automotive Ethernet channels.
The AE6910L Automotive Ethernet Channel Compliance Software provides an automated way to test connectors, cables, or harnesses of automotive Ethernet channels.
Automotive Ethernet Channel Compliance Software
AE6910L
The AE6910L Automotive Ethernet Channel Compliance Software provides an automated way to test connectors, cables, or harnesses of automotive Ethernet channels.
Automotive Ethernet Conformance Test Software for Cables, Connectors and Harnesses
The Whole Communications Channel represents the complete wired connection between two transmit/receive modules with an automotive Ethernet interface using a two-wire twisted pair cable. The Keysight AE6910L software ensures signal quality requirements, with conformance testing for that channel. In addition, it performs return loss, insertion loss, mode conversion, and power sum cross-talk measurements of a cable in a bundle.
Unlike CAN, LIN, Automotive Ethernet demands rigorous compliance verification using test cases that cover transmitters (Tx), receivers (Rx), and harness/connector assemblies. To help you save time and effort, Keysight offers solutions that automate the testing and validation across Transmitter (Tx), Receiver (Rx), and the connections between automotive Ethernet devices. Our engineers have invested thousands of hours in learning the standards and creating automated, repeatable compliance tests. These proven applications help you ensure proper test configuration and valid measurement results. Ultimately, you’ll have greater confidence that your device is compliant. The AE6000L Automotive Ethernet Test Solution offers hardware and accessories to make sure you have all of the components you need to get up and running quickly.
Standards supported
- Channel testing per OPEN Alliance (1000BASE-T1) - TC9 UTP and STP specifications
- OPEN Alliance 100BASE-T1 Definitions for communications channel
- IEEE 802.3bw, 802.3bp and 802.3ch
Key capabilities
- Automatically detects the number of available ports
- Creates a test plan for those lanes selected with all the required tests per the specification
- Automatically sets up the network analyzer for each measurement and applies the limit lines
- Expandable to cover proprietary limits and quickly adapt to new standards
- Creates a printable PDF report of the tests that have been run
Ordering information
- The software requires Keysight PathWave Test Automation software.
- The software runs on a VNA with option TDR; choose benchtop, PXI, or USB.
- Software licenses are available as node-locked, transportable, USB portable, or floating and can be purchased with 6, 12, 24, 36, or 60 months of support.
- Configuration guidelines are available in the data sheet.
For more information about additional and more custom network analyzer software, please visit Network Analyzer Software.
Quantum Library Demodulation
M5400DMOA allows quick and easy access to targeted quantum signal processing FPGA IP blocks used within PathWave FPGA to complete an entire demodulation IQ path.
M5400DMOA allows quick and easy access to targeted quantum signal processing FPGA IP blocks used within PathWave FPGA to complete an entire demodulation IQ path.
Quantum Library Demodulation
M5400DMOA
M5400DMOA allows quick and easy access to targeted quantum signal processing FPGA IP blocks used within PathWave FPGA to complete an entire demodulation IQ path.
- Phase-locked to the AWG, no external references required
- Phase-adjustable to rotate and accommodate IQ constellations
- Ultra-flexible:
- Customizable integrating window
- For example: Rectangular (average), Hann, Hamming, Flat Top, Blackman, matching windows
- Streaming of raw data, raw IQ data, single-point IQ data, Qubit state
- Ultra-fast:
- FPGA-based continuous real-time processing
- Ultra-low-latency for feedback (QEC or state initialization)
- Ultra-light and scalable:
- Small FPGA footprint
- FDM (Frequency Division Multiplexing) capable for multi-qubit readout
PathWave Test Sync Executive
KS2201A PathWave Test Sync Executive enables execution of synchronous, real-time operations across multiple instruments based on Keysight's HVI test solution.
KS2201A PathWave Test Sync Executive enables execution of synchronous, real-time operations across multiple instruments based on Keysight's HVI test solution.
PathWave Test Sync Executive
KS2201A
KS2201A PathWave Test Sync Executive enables execution of synchronous, real-time operations across multiple instruments based on Keysight's HVI test solution.
The KS2201A PathWave Test Sync Executive is a programming environment based on Keysight's Hard Virtual Instrument (HVI) technology, that enables the development and execution of synchronous, real-time operations across multiple instruments. The real-time sequencing and synchronization capabilities make it a breakthrough tool for developing measurement applications that require tight synchronization, phase coherence, and real-time control and feedback. Achieve rapid development of high performance, synchronous real-time solutions with transparent multi-instrument synchronization.
Typical Testing Applications
- Quantum research: Instrumented Qubit control systems
- Multi-channel comms: MIMO, beamforming, multi-emitter test
- Wireless Power Amplifier (PA) test: alignment of envelope tracking (ET) and digital pre-distortion (DPD)
- Electronic Warfare (EW): Precisely timed multi-emitter and beamformed A/D systems
- Other validation applications that require precise timing across multiple chasses and families of equipment. (note: equipment support is also required)
PathWave BenchVue Lab Management and Control Solution
A network-based application software that enables all instruments to be interconnected via LAN or WLAN, control all the instruments in the lab from anywhere.
A network-based application software that enables all instruments to be interconnected via LAN or WLAN, control all the instruments in the lab from anywhere.
PathWave BenchVue Lab Management and Control Solution
PW9111EDU
A network-based application software that enables all instruments to be interconnected via LAN or WLAN, control all the instruments in the lab from anywhere.
Quantum Library Dynamic Pulse Generation
M5400PLSA Quantum Library Dynamic Pulse Generation software allows easy access to targeted quantum synthesizer and modulation FPGA IP blocks used within FPGA.
M5400PLSA Quantum Library Dynamic Pulse Generation software allows easy access to targeted quantum synthesizer and modulation FPGA IP blocks used within FPGA.
Quantum Library Dynamic Pulse Generation
M5400PLSA
M5400PLSA Quantum Library Dynamic Pulse Generation software allows easy access to targeted quantum synthesizer and modulation FPGA IP blocks used within FPGA.
- Memory efficient by defining just gate primitives
- Triggering of individual gates performed by the sequencer (HVI)
- Phase Coherent:
- Between pulses: the free-running LO keeps track of the phase
- Between channels and between modules: thanks to the HVI sequencer
- Crosstalk Management:
- 64+ waveform primitives to allow quantum compiler to manage crosstalk
- Permanent phase shifts for automatic crosstalk management
- Ultra-fast:
- FPGA-based gapless real-time operation
- Ultra-low-latency waveform selection for feedback (e.g. QEC or state initialization)
- Ultra-light and scalable:
- Small FPGA footprint
- FDM (Frequency Division Multiplexing) capable for multi-qubit readout
- Easy-to-integrate in the SW stack:
- Easy-to-use API to control the FPGA IP blocks
PathWave Lab Operations for Remote Learning
Keysight's industry-ready PathWave Lab Operations is designed for complete remote setup of instrument labs and covers the needs from web-based lab management.
Keysight's industry-ready PathWave Lab Operations is designed for complete remote setup of instrument labs and covers the needs from web-based lab management.
PathWave Lab Operations for Remote Learning
PW9112EDU
Keysight's industry-ready PathWave Lab Operations is designed for complete remote setup of instrument labs and covers the needs from web-based lab management.
Perform Lab Work Remotely Through Web Browser
Keysight's PathWave Lab Operation for Remote Learning software offers a convenient way to switch to online learning. This end-to-end solution allows the complete remote setup of instrument labs. It covers all your needs, including web-based lab management, scheduling administration, instrument control, and remote access for measurement and analysis.
- Streamline and simplify lab management, saving you time to focus on teaching
- Interact with students and facilitate group collaboration in real time to accomplish smart teaching and learning
- Access secure lab management and control tools with your existing university infrastructure through on-premises support
- Integrate with your Learning Management Systems (LMS) such as Moodle, Blackboard, Canvas, and others
- Get remote desktop control for configuration and measurement
- Connect to industry-grade test instruments with the latest software and technology used in the industry
PathWave Manufacturing Analytics
Use PM2288A PathWave Manufacturing Analytics to drive manufacturing improvements with an Industry 4.0 electronics data analytics solution.
Use PM2288A PathWave Manufacturing Analytics to drive manufacturing improvements with an Industry 4.0 electronics data analytics solution.
PathWave Manufacturing Analytics
PM2288A
Use PM2288A PathWave Manufacturing Analytics to drive manufacturing improvements with an Industry 4.0 electronics data analytics solution.
Combining test and measurement expertise with data science and big data engineering, the PathWave Manufacturing Analytics platform provides actionable insights for every level in your organization in the smart factory of the future. Improve yield, lower retest and handling, and lower the cost of poor quality with big data advanced analytics that really works. Accelerate your Return on Investment and business outcomes with unique, innovative analytics.
Descriptive
- View your factory performance in terms of Overall Operating Efficiency (OEE), yield, first pass yield, retest, volume, etc. with extensive drilldowns and filters
- Save the workspace and see your own personalized dashboard on demand, real-time from anywhere
Diagnostic
- Use no-code specially curated diagnostic tools and visualizations for all levels of operators, technicians and engineers
- Root cause issues with just a few clicks, compare between multiple tests, systems, fixtures, parts, probes and more
Predictive
- Predict potential quality issues in real-time manufacturing with optimized machine learning anomaly detection models
- Get only “high severity scored” alerts. Take action to prevent catastrophe and mitigate the risks of poor quality without alert fatigue
Prescriptive
- Prescribe real-time adaptive test limits with optimized dynamic part averaging testing
- Leverage transformed data and insights for horizontal and vertical systems to optimize processes
PathWave Waveform Analytics
PathWave Waveform Analytics (PWA) enables long-duration waveform compression, high-resolution playback, and analysis exceeding several terabytes of data.
PathWave Waveform Analytics (PWA) enables long-duration waveform compression, high-resolution playback, and analysis exceeding several terabytes of data.
PathWave Waveform Analytics
KS6300A
PathWave Waveform Analytics (PWA) enables long-duration waveform compression, high-resolution playback, and analysis exceeding several terabytes of data.
Designing and manufacturing low-power products that are robust, reliable, and secure requires the collection and analysis of extensive and long-duration waveform data from oscilloscopes and analyzers. Automate this extremely manual task and raise your engineering productivity without sacrificing accuracy.
Keysight's PathWave Waveform Analytics is an edge-to-cloud computing application that improves anomaly detection and reduces data storage costs in pre-silicon validation using machine learning algorithms.
The automated technology combines pre- and post-processing machine learning models that streamline anomaly discovery. By debugging in pre-silicon, you save time in the costly post-silicon validation phase, reducing your overall project costs. The software helps you detect waveform anomalies through a single dashboard that displays an unlimited number of channels.
- Compress long-duration waveforms by 60%
- Reduce waveform transfer time by 10x
- Easily transfer data using edge-to-cloud computing applications
- View an unlimited number of channels on a single dashboard
- Pin waveforms of interest for comparison analysis
- Analyze any portion of the big vector data
LCA TAP Plug-In
Simplifies automation of LCA RF/optical measurements with TAP.
Simplifies automation of LCA RF/optical measurements with TAP.
LCA TAP Plug-In
N4370P01A
Simplifies automation of LCA RF/optical measurements with TAP.
Easily integrate LCA measurements within TAP test sequences
- Test steps for optical/electrical, electrical/optical, and optical/optical spectral measurements
- Test steps for devices with either single-ended or balanced RF ports
- Clear step configurations for measurement settings, calibration, and de-embedding
- Template for result display in TAP Result Viewer
Supported instruments
- PNA-based Lightwave Component Analyzers: N4372E, N4373E, N4373D, N4373C, N4373B, N4375E, N4375D, N4375B, N4376E, N4376D, and N4376B
Keysight Test Automation on PathWave (TAP) is a modern Microsoft .NET-based application for standalone use or in combination with higher level test executive software environments. Instrument plug-ins provide test steps that can be added to work-flow sequences without instrument level programming commands. The LCA plug-in steps further simplify automation by handling the interface to both the PNA instrument and the LCA optical hardware and software and providing the test steps for easy configuration.
Wafer Prober TAP Plug-In
Easily integrate wafer prober control within TAP test sequences for fully automated wafer and chip scale test solution for Integrated Photonics.
Easily integrate wafer prober control within TAP test sequences for fully automated wafer and chip scale test solution for Integrated Photonics.
Wafer Prober TAP Plug-In
N7700210C
Easily integrate wafer prober control within TAP test sequences for fully automated wafer and chip scale test solution for Integrated Photonics.
Fully Automated Wafer and Chip Scale Test Solution for Integrated Photonics
Easily integrate wafer prober control within TAP test sequences
- Test steps for optical and electrical probe positioning and alignment
- Support for array / single fiber probes, edge and surface coupling, RF/DC probes and flexible probe orientations (east/west/north/south)
- Automated device stepping and prober status control
- Measurement test plan and device data management (import / export /editing of device coordinates, device meta parameters and test conditions)
Supported wafer probers
- Formfactor CM300xi with Velox Software and Silicon Photonics Tools
Keysight Test Automation on PathWave (TAP), a modern Microsoft .NET-based application adds workflow sequences through instrument plug-ins without the need for instrument-level programming commands. The N7700210C Wafer Prober plug-in further simplifies automation by handling the interface to the Formfactor semi-automated probe station hardware and Formfactor Velox and Silicon Photonics Tools software. Test steps realize wafer chuck movement, probe positioning, and alignment tasks within a test plan that can be combined with instrument test execution steps. Easy configuration of wafer prober settings for positioning, and for RF and optical probes. Designed for standalone use or in combination with higher level test executive software environments.
Keysight’s wafer prober sample test plan with prober steps
List of device elements and example of element optical IO port characteristics
