お探しのページはこちらでしょうか. その他の検索結果:

主な特長

  • InfiniiMode
  • InfiniiMax III/III+のすべてのアクセサリーと新しいQuickTipヘッドに対応
  • プローブ・アンプに「測定済み」のSパラメータを搭載し、より正確なAC補正
  • Infiniium 90000X/QおよびVシリーズ・オシロスコープに直接接続可能（ソフトウェアバージョン5.50以降が必要）

帯域幅を拡張したN7001A InfiniiMax III+ 13GHzプローブ・アンプは、汎用の高速差動バスプロービングに使用されます。

キーサイトのInfiniiMax III+プローブは、測定性能およびプローブのユーザビリティを大幅に拡張するInfiniiModeテクノロジーを備え、差動信号のすべての成分を測定できます。 1回の接続でInfiniiMax III+を設定して、差動信号、シングルエンドA/B信号、差動信号のコモンモード成分を測定できます。

各InfiniiMax III+プローブアンプは、InfiniiMax IIIテクノロジーと同様に、固有のSパラメータを内蔵し、この周波数応答データとさまざまなプローブヘッドのSパラメータを使用してプローブの振幅および位相応答をフラットにして確度を向上します。 個々のプローブアンプの応答を補正することにより、より正確なプローブ補正が可能になり、測定確度を高めることができます。

機能の拡張

アクセサリ
すべてのアクセサリを表示

N7001A InfiniiMax III+ シリーズ プローブアンプ、13 GHzの注目のリソース

Application Notes 2024.10.20

Demystifying RCRC and RC Probes

Demystifying RCRC and RC Probes

An ideal oscilloscope probe would simply provide an exact replica of the signal being probed. However, in the real world, the probe becomes a part of the circuit under test because the probe or probing accessories attached to the device under test (DUT) introduce probe loading to the circuit. Depending on the probe and the circuit, the probe loading may cause unwanted side effects such as overshooting, ringing, and DC offset problems in the time domain. Learn more about the difference between RC and RCRC probe architecture, what this means for probe loading, and how to get the most accurate measurements.

2024.10.20

Application Notes 2018.06.20

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Keysight InfiniiMax differential probes are DSP corrected to have a flat magnitude and phase response to provide the highest possible accuracy. The bandwidth chosen to correct to is typically around 3dB non-corrected bandwidth. Usually, extending the bandwidth much beyond that point will increase the noise floor, and if pushed even further, can cause unrealistic noise artifacts. This application note presents the techniques used to extend the bandwidth performance of the InfiniiMax 1169A/B and the N5381A/B solder-in head using the PrecisionProbe application on Infiniium realtime oscilloscope.

2018.06.20

Application Notes 2023.03.12

Probe Soldering Guidelines for Keysight InfiniiMax Probes

Probe Soldering Guidelines for Keysight InfiniiMax Probes

There are various ways to connect test instrumentation probes to devices under test (DUTs). One such method is soldering, which provides a reliable connection and minimizes parasitic probing effects by keeping wire lengths and connections as short as possible. Many of Keysight’s high performance oscilloscope probes utilize soldered connections. As probes and devices continue to shrink, using the correct tools and soldering skills becomes even more critical in order to avoid damage and connectivity issues. This guide provides helpful tips, recommended tools, and techniques specific to Keysight probes to help test engineers make the most out of their soldered-in probes and connections.

2023.03.12

Quick Start Guides 2019.01.21

Quick Reference Card for Keysight N7000/1/2/3A InfiniiMax III+ Probes

Quick Reference Card for Keysight N7000/1/2/3A InfiniiMax III+ Probes

This card quickly describes how to use the InfiniiMax III+ probes and compatible browsers and probe heads.

2019.01.21

User Manuals 2015.01.31

Handling Guide for Keysight N7000/1/2/3A InfiniiMax III+ Probes

Handling Guide for Keysight N7000/1/2/3A InfiniiMax III+ Probes

This guide assists you in properly handling your InfiniiMax III+ N7000/1/2/3A probes to prevent damage and maintain high performance.

2015.01.31

Data Sheets 2024.06.25

Infiniium Oscilloscope Probes and Accessories

Infiniium Oscilloscope Probes and Accessories

To get the most out of your Keysight Infiniium oscilloscope, you need the right probes and accessories for your particular applications. Whether you need the high bandwidth and low loading of an active probe, an easy way to connect to surface mount ICs, or a passive probe to measure high voltages, there’s a wide selection of high-quality probes and accessories for your Infiniium oscilloscope. The Infiniium probes and accessories data sheet provides you the overview of all probes and accessories recommended for Infiniium oscilloscopes.

2024.06.25

データシート 2015.01.20

Keysight Technologies InfiniiMax III/III+プローブシステム

Keysight Technologies InfiniiMax III/III+プローブシステム

InfiniiMax III プロービング システムは、今日の高密度 IC および回路基板向けの柔軟な接続ソリューションを使用して、差動信号の測定に利用できる最高のパフォーマンスを提供します。

2015.01.20

User Manuals 2023.02.09

N2830/1/2A and N7000/1/2/3A InfiniiMax III+ Probes User Guide

N2830/1/2A and N7000/1/2/3A InfiniiMax III+ Probes User Guide

This document contains information about the InfiniiMax III and III+ Probing System.

2023.02.09

Oscilloscope Probes Selection Guide

Oscilloscope Probes Selection Guide

Keysight offers a broad range of voltage, current, and optical probing solutions for InfiniiVision and Infiniium Series oscilloscopes.
すべてのリソースを表示

すべてのリソースを表示

ご要望、ご質問はございませんか。

お問い合わせはこちら