- Compatible with all InfiniiMax III/III+ accessories and new QuickTip head
- Probe amp loaded with “measured” S-parameter for more accurate AC correction
- Direct connect to Infiniium 90000X/Q and V-Series oscilloscopes (requires software version 5.50 or higher)
The bandwidth-enhanced N7001A InfiniiMax III+ 13 GHz probe amplifier is used for general-purpose, high-speed differential bus probing.
Keysight’s InfiniiMax III+ probes offer InfiniiMode technology, which greatly expands the measurement capabilities and usability of the probe, making it capable of measuring all the components of a differential signal. With a single connection, engineers can set the InfiniiMax III+ to measure the differential signal, the single-ended A or B signals, and the common-mode component of a differential signal.
As with InfiniiMax III technology, each individual InfiniiMax III+ probe amp contains its unique S-parameter, and this frequency response data is used with the S-parameters of the various probe heads to further flatten the probe’s magnitude and phase response for accuracy. The ability to correct a specific probe amplifier’s response results in a more accurate probe correction, which yields a more accurate measurement.
Featured Resources for N7001A InfiniiMax III+ Series Probe Amplifier, 13 GHz
Application Notes 2021.09.12
Demystifying RCRC and RC Probe
Application Notes 2018.06.20
Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head
Application Notes 2018.10.06
Probe Soldering Guidelines for Keysight InfiniiMax Probes
Quick Start Guides 2019.01.21
Quick Reference Card for Keysight N7000/1/2/3A InfiniiMax III+ Probes
User Manuals 2015.01.31
Handling Guide for Keysight N7000/1/2/3A InfiniiMax III+ Probes
Data Sheets 2021.09.27
Infiniium Oscilloscope Probes and Accessories
Data Sheets 2021.06.20
InfiniiMax III/III+ Probing System
User Manuals 2021.09.15
N2830/1/2A and N7000/1/2/3A InfiniiMax III+ Probes User's Guide
Oscilloscope Probes Selection Guide