Choose a country or area to see content specific to your location
What are you looking for?
-
-
3D Interconnect Designer
3D Interconnect Designer provides a flexible modeling and optimization environment for any advanced interconnect structure, including chiplets, stacked die, packages, and PCBs.
-
Save up to 50% on an XR8 Oscilloscope
Get faster digital validation for less with a trade-in.
-
Discover Keysight AI Data Center Builder
Emulate every part of your data center infrastructure. Emulate Anything. Optimize Everything.
-
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Precision In-Circuit Testing for Production
Achieve fast, accurate board-level testing with robust inline and offline ICT designed for modern manufacturing.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
448 Gb/s Waveform Generation
Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.
-
Stream 120 MHz I/Q Data to Your Laptop in the FieldPinpoint interference with post-processing spectrum management software in the lab.
Find the Right ATE Power SolutionUse this selector tool to quickly identify the best power supply for your aerospace and defense ATE requirements.
-
- Solutions
-
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
FeaturedHands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Success Stories
HPE Juniper Networking Builds Next-Gen AI Infrastructure - Buy
-
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 12 of 1581
-
126
-
984
No Filter available
InfiniiMax Ultra Probe Amplifier, 25 GHz
Best probes for measuring signals found in the latest DDR5 and MIPI standards.
Best probes for measuring signals found in the latest DDR5 and MIPI standards.
InfiniiMax Ultra Probe Amplifier, 25 GHz
MX0025A
Best probes for measuring signals found in the latest DDR5 and MIPI standards.
- Test and validate high-speed technologies such as DDR5 / MIPI with the 25 GHz probe amplifier (AP2).
- Experience the highest input impedance in midband frequencies for low-energy probing.
- Boost test margins with the lowest signal degradation.
- Probe small devices with the super-flexible micro probe head or choose from the widest variety of compatible probe heads for your unique application.
- Measure differential, single-ended, and common mode signals with a single probe tip.
- Use with Infiniium UXR-, 90000 X-, Q-, V-, and Z-Series oscilloscopes.
Keysight’s MX0025A InfiniiMax Ultra Series probe amplifier improves usability because you can measure differential, single-ended, and common mode signals with a single probe tip.
When you use a probe to connect your signal to your oscilloscope, it becomes part of the circuit affecting your test. Your probe may be hiding signal details, loading down your signal, or distorting it. InfiniiMax Ultra Series probes have the lowest loading for minimal impact to your circuit. Boost your test margins and gain measurement confidence with their unprecedented accuracy. Ensure your entire measurement system is helping you see the truest representation of your signal.
These probes have the lowest noise and capacitive loading and the lowest loading across more frequencies due to their RC high impedance profile. The InfiniiMax Ultra Series supports InfiniiMode and has a user-defined AC calibration mode, a wider input voltage range, more accuracy with unique S-parameter characterization, lower capacitive loading, a wider input voltage range, micro / socketed probe heads for smaller density probing, and more bandwidths. The InfiniiMax Ultra Series has an RC input impedance architecture with the lowest loading and least signal distortion across the widest frequency range.
InfiniiMax Ultra probes have three attenuation ranges — 1:1, 4:1, and 8:1 — giving you superior noise performance and large voltage ranges, all while maintaining maximum bandwidth. The input range automatically configures depending on the size of the input signal and vertical scale of your oscilloscope.
Choose from the three flexible input dynamic ranges from 600 mVpp at 1:1, 2.5 Vpp at 4:1, and 5 Vpp at 8:1. Clearly see and know when your design is satisfactory, keep up with standards, easily probe small devices, and reduce test complexity with the InfiniiMax Ultra Series probes.
Thermocouple Power Sensors
N8482A thermocouple power sensor, 100 kHz to 6 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
N8482A thermocouple power sensor, 100 kHz to 6 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
Thermocouple Power Sensors
N8482A
N8482A thermocouple power sensor, 100 kHz to 6 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
- Wide frequency range from 100 kHz to 6 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Thermocouple Power Sensors
N8481B thermocouple power sensor, 10 MHz to 18 GHz, -5 to +44 dBm; drop-in replacement for 8480 Series sensors.
N8481B thermocouple power sensor, 10 MHz to 18 GHz, -5 to +44 dBm; drop-in replacement for 8480 Series sensors.
Thermocouple Power Sensors
N8481B
N8481B thermocouple power sensor, 10 MHz to 18 GHz, -5 to +44 dBm; drop-in replacement for 8480 Series sensors.
- Wide frequency range from 10 MHz to 18 GHz
- Wide dynamic range from -5 to +44 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Thermocouple Power Sensors
N8486AQ waveguide thermocouple power sensor, 33 to 50 GHz, -35 to +20 dBm; replaces 8480 Series waveguide sensors.
N8486AQ waveguide thermocouple power sensor, 33 to 50 GHz, -35 to +20 dBm; replaces 8480 Series waveguide sensors.
Thermocouple Power Sensors
N8486AQ
N8486AQ waveguide thermocouple power sensor, 33 to 50 GHz, -35 to +20 dBm; replaces 8480 Series waveguide sensors.
- Wide frequency range from 33 to 50 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Thermocouple Power Sensors
N8486AR waveguide thermocouple power sensor, 26.5 to 40 GHz, -35 to +20 dBm; replaces 8480 Series waveguide sensors.
N8486AR waveguide thermocouple power sensor, 26.5 to 40 GHz, -35 to +20 dBm; replaces 8480 Series waveguide sensors.
Thermocouple Power Sensors
N8486AR
N8486AR waveguide thermocouple power sensor, 26.5 to 40 GHz, -35 to +20 dBm; replaces 8480 Series waveguide sensors.
- Wide frequency range from 26.5 to 40 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Thermocouple Power Sensors
N8485A thermocouple power sensor, 10 MHz to 67 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
N8485A thermocouple power sensor, 10 MHz to 67 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
Thermocouple Power Sensors
N8485A
N8485A thermocouple power sensor, 10 MHz to 67 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
- Wide frequency range from 10 MHz to 26.5 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Thermocouple Power Sensors
N8481A thermocouple power sensor, 10 MHz to 18 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
N8481A thermocouple power sensor, 10 MHz to 18 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
Thermocouple Power Sensors
N8481A
N8481A thermocouple power sensor, 10 MHz to 18 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
- Wide frequency range from 10 MHz to 18 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
E-Series Average Power Sensor
The E9304A power sensor measures average power over the frequency range 9 kHz to 6 GHz and power range -60 to +20 dBm. This sensor is ideal for very low frequency (VLF) power measurements.
The E9304A power sensor measures average power over the frequency range 9 kHz to 6 GHz and power range -60 to +20 dBm. This sensor is ideal for very low frequency (VLF) power measurements.
E-Series Average Power Sensor
E9304A
The E9304A power sensor measures average power over the frequency range 9 kHz to 6 GHz and power range -60 to +20 dBm. This sensor is ideal for very low frequency (VLF) power measurements.
- Low frequency coverage of 9 kHz to 6 GHz for EMC/EMI test applications such as the radiated immunity test (IEC61000-4-3)
- High sensitivity of -60 to +20 dBm and fast measurement speed to reduce the time taken to calibrate radiated field uniformity and EMC/EMI test receivers
- Measure transmitter power and receiver sensitivity at Very Low Frequency (VLF) to microwave frequencies
- Special option available for frequencies up to 18 GHz
- Compatible with EPM (N1913B/14B, N1913A/14A, E4418B/19B), EPM-P (E4416A/17A) and P-series (N1911A/12A) power meters
E-Series Average Power Sensor
The E9301B power sensor measures average power over the frequency range 10 MHz to 6 GHz and power range -30 to +44 dBm (74 dB dynamic range).
The E9301B power sensor measures average power over the frequency range 10 MHz to 6 GHz and power range -30 to +44 dBm (74 dB dynamic range).
E-Series Average Power Sensor
E9301B
The E9301B power sensor measures average power over the frequency range 10 MHz to 6 GHz and power range -30 to +44 dBm (74 dB dynamic range).
- Frequency range of 10 MHz to 6 GHz coverage for Wireless Comms formats
- Wide dynamic range power measurements from -30 to +44 dBm
- Measure the average power of all modulation formats
- Low SWR for reducing mismatch uncertainty
- Calibration factors, linearity, and temperature compensation data are stored in EEPROM
- Compatible with EPM (N1913B/14B, N1913A/14A, E4418B/19B), EPM-P (E4416A/17A) and P-series (N1911A/12A) power meters
Thermocouple Power Sensors
N8488A power sensor has the widest frequency range among N8480 power sensors offering from Keysight.
N8488A power sensor has the widest frequency range among N8480 power sensors offering from Keysight.
Thermocouple Power Sensors
N8488A
N8488A power sensor has the widest frequency range among N8480 power sensors offering from Keysight.
- Wide frequency range from 10 MHz to 67 GHz (Not warranted spec from 67 to 70 GHz)
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatibility
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Thermocouple Power Sensors
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
Thermocouple Power Sensors
N8481H
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
- Wide frequency range from 10 MHz to 18 GHz
- Wide dynamic range from -15 to +35 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Millimeter-Wave Noise Source, R-band, 26.5 to 40 GHz
The R347B waveguide noise source, (26.5 to 40 GHz frequency range), allows you to make accurate noise figure measurements on millimeter-wave devices.
The R347B waveguide noise source, (26.5 to 40 GHz frequency range), allows you to make accurate noise figure measurements on millimeter-wave devices.
Millimeter-Wave Noise Source, R-band, 26.5 to 40 GHz
R347B
The R347B waveguide noise source, (26.5 to 40 GHz frequency range), allows you to make accurate noise figure measurements on millimeter-wave devices.
The Keysight R347B noise source covers a 26.5 to 40 GHz frequency range. This waveguide noise source allows you to make accurate and convenient noise figure measurements on millimeter-wave devices. The R347B provides highly precise broadband noise at the input of the system or component under test. The noise figure meter then processes the ON/OFF ratio of noise power present in the system IF, and provides an accurate reading of noise figure and gain. The R347B noise source has remarkable ENR stability over time, which allows longer recalibration cycles and more accurate noise figure measurements.
- Performance and reliability at millimeter-wave frequencies
- Excellent ENR stability over time
- Low SWR
