N7850A Power Sensors Calibration Application

N7850A Power Sensors Calibration Application

キーサイトは、最新のバグ修正とセキュリティパッチを含む、利用可能な最新バージョンを使用することをお勧めします。
リリース バージョン 内容
2026-07-08 E.07.04 - Added support for N4690C Electronic Calibration Modules - Added support for E9304A Opt H18 as an alternative test equipment for UUT E9304A - Updated Store Calibration Factor test to update/write the Calibration Date in the EEPROM of the N848x CFT power sensors - Updated the Calibration Factor Deviation test to exclude the 50 MHz Calibration Factor comparison for the N8486AR and N8486AQ power sensors. - Updated the report template - Use the new calibration standards. Remove “Undetermined” result type and replace with Passed ‡ / Failed ‡. - Report the measurement uncertainty with 2 significant figures - Updated the micro scaling factor from u to μ
リリース バージョン
2026-07-08 E.07.04
Version Description
- Added support for N4690C Electronic Calibration Modules - Added support for E9304A Opt H18 as an alternative test equipment for UUT E9304A - Updated Store Calibration Factor test to update/write the Calibration Date in the EEPROM of the N848x CFT power sensors - Updated the Calibration Factor Deviation test to exclude the 50 MHz Calibration Factor comparison for the N8486AR and N8486AQ power sensors. - Updated the report template - Use the new calibration standards. Remove “Undetermined” result type and replace with Passed ‡ / Failed ‡. - Report the measurement uncertainty with 2 significant figures - Updated the micro scaling factor from u to μ

ダウンロード方法

  • Close all applications.
  • Download application .exe file to the PC desktop.

インストール方法

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

ライセンス

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

説明資料

Download

Installs on: PC

OS

  • Windows 10/11

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.04.09 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

前提知識

対象測定器

  • E9304A, E9304A Opt H18, N8481A Opt STD, CFT, 200, N8482A Opt STD, CFT, N8485A Opt STD, CFT, 033, N8487A Opt STD, CFT, N8481B Opt STD, CFT, N8481H Opt STD, CFT, N8482B Opt STD, CFT, N8482H Opt STD, CFT, N8486AQ Opt STD, CFT, N8486AR Opt STD, CFT, N8488A Opt STD, 8481A,8482A,8485A,8485D,8487A

ダウンロード方法

  • Close all applications.
  • Download application .exe file to the PC desktop.

インストール方法

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

ライセンス

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

説明資料

Download

Installs on: PC

OS

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

前提知識

対象測定器

  • E9304A, E9304A Opt H18, N8481A Opt STD, CFT, 200, N8482A Opt STD, CFT, N8485A Opt STD, CFT, 033, N8487A Opt STD, CFT, N8481B Opt STD, CFT, N8481H Opt STD, CFT, N8482B Opt STD, CFT, N8482H Opt STD, CFT, N8486AQ Opt STD, CFT, N8486AR Opt STD, CFT, N8488A Opt STD, 8481A,8482A,8485A,8485D,8487A

ダウンロード方法

  • Close all applications.
  • Download application .exe file to the PC desktop.

インストール方法

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

ライセンス

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

説明資料

Download

Installs on: PC

OS

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

前提知識

対象測定器

  • E9304A, E9304A Opt H18, N8481A Opt STD, CFT, 200, N8482A Opt STD, CFT, N8485A Opt STD, CFT, 033, N8487A Opt STD, CFT, N8481B Opt STD, CFT, N8481H Opt STD, CFT, N8482B Opt STD, CFT, N8482H Opt STD, CFT, N8486AQ Opt STD, CFT, N8486AR Opt STD, CFT, N8488A Opt STD, 8481A,8482A,8485A,8485D,8487A

ダウンロード方法

  • Close all applications.
  • Download application .exe file to the PC desktop.

インストール方法

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

ライセンス

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

説明資料

Download

Installs on: PC

OS

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

前提知識

対象測定器

  • E9304A, E9304A Opt H18, N8481A Opt STD, CFT, 200, N8482A Opt STD, CFT, N8485A Opt STD, CFT, 033, N8487A Opt STD, CFT, N8481B Opt STD, CFT, N8481H Opt STD, CFT, N8482B Opt STD, CFT, N8482H Opt STD, CFT, N8486AQ Opt STD, CFT, N8486AR Opt STD, CFT, N8488A Opt STD, 8481A,8482A,8485A,8485D,8487A
SHOW MORE