Accessories

Rack-mount kit for the Keysight InfiniiVision HD3 Series oscilloscope.

The Y1160A allows for mounting of the L4400 Series LXI instruments in EIA rack cabinet. The kit allows you to flush, recess, or reversemount up to two L4400 instruments per shelf while occupying one EIA rack unit of space.

The Y1130B is used for forward or reverse rack mount. A rail kit is also required. For Keysight racks, order either a E3663AC rail kit for forward mount or a E3664AC rail kit for reverse mount. For non-Keysight racks, use a third party rail kit.

For more information about, please visit Keysight Multifunction Switch / Measure Mainframe and Modules

Features:

• Mount your S-Series or 9000 Series oscilloscopes in a rack
• Fits into a 19-inch (487-mm) rack cabinet
• 8U high

Compatible oscilloscopes:

• S-Series oscilloscopes
• 9000A Series oscilloscopes
• 9000H Series oscilloscopes

This rack mount kit consists of a support shelf and hardware for mounting the S-Series and 9000 Series oscilloscopes into an Electronics Association (EIA) standard rack cabinet.

O kit de painel de preenchimento N6708A deve ser utilizado com os mainframes de sistema de alimentação modular compactos N6700A, N6700B, N6701A ou N6702A. Para operação adequada desses mainframes, quaisquer slots vazios devem ser preenchidos com o painel. O kit de painel de preenchimento contém 3 painéis, então cada kit pode preencher até 3 slots vazios.

O kit de painel de preenchimento N6708A também pode ser pedido como opção FLR para qualquer mainframe de sistema de alimentação compacto N6700.

• Deseja combinar módulos? Veja todos os módulos N6700 disponíveis

The Keysight N6709C is a rack mount kit that provides all the necessary hardware to rack mount one N6700C, N6701C, or N6702C modular system power supply in 1U rack space. This rackmount kit includes front rack ears and rear supports that take the place of standard rack rails or slides. Note: Standard rack rails and slides are not compatible with the N6700 Series as they block the air inlets on the side of the mainframe.

The N6709C rack mount kit is also orderable as option 908 on any N6700 Series modular system power supply.

• This rack mount kit can secure 1 to 4 units of the E36100B Series DC power supplies horizontally in the rack

The Keysight E36110A rackmount kit is designed to secure 1 - 4 units of E36100B Series DC power supplies horizontally in a standard 19-inch rack cabinet. They are designed to fit in two rack-units (2U) of space.

The Keysight E36110A is compatible with the Keysight E36102B, E36103B, E36104B, E36105B, and E36106B.

For more information about Keysight rack mount kits, please visit rack mount kits and components.

• Rack cabinet: System II or System II Plus

The Keysight DAQA190A/1CM124A rackmount kit is designed for use with only one instrument, mounted on either the left or the right side of the rack. The kit includes one rack flange and one half-rack width filler panel, 4 screws to attach the instrument, 4 rack screws with nuts and installation instructions in English.

The Keysight DAQA190A/1CM124A is compatible with the Keysight DAQ970A, DAQ973A, 34970A, and 34972A data acquisition systems, the Keysight 34460A, 34461A, 34465A, 34470A, and 34420A DMMs, the Keysight 33500B and 33600A series function generators.

For more information about DAQ, please visit Keysight data acquisition - daq page.

Learn more about Data Acquisition Accessories and Options

• Gabinete de rack: System II ou System II Plus

O kit adaptador de montagem em rack 34193A da Keysight (5063-9243) é utilizado para montar um módulo de ½ largura ou dois módulos de ¼ de largura do padrão de instrumentos 3U System II de 132,6 mm, tais como os produtos E3631A até o E3634A e E3646A até o E3649A da Keysight. Para maiores detalhes, veja o catálogo de produtos de solução de gabinetes.

• Rack Cabinet: System II or System II Plus works with any standard System II 3U 132.6mm high instrument such as the Keysight 6811B, 6812B, and 6813B.

The Keysight 34192A (5063-9214) dual rackmount flange kit secures the instrument to the front of the System II cabinet. This kit can be used with the 34194A Dual Lock Link Kit to mount two Keysight System II (half-width, 3U height) instruments side-by-side.

The Keysight 34192A dual rackmount flange kit is compatible with any standard System II 3U 132.6mm high instrument such as the Keysight 6811B, 6812B, and 6813B.

Please look at the link for more information about Keysight Performance AC Power supplies and related accessories. 

• Gabinete de rack: System II ou System II Plus funcionam com os 34401A, 34420A, 34970A, 53131A, 53132A, 53181A, 33220A, 33250A e a maioria dos produtos de 2 slots e tamanho de meio rack da Keysight.

O kit de suporte tipo flange para montagem em rack 34191A (5063-9212) fixa o instrumento na frente de um gabinete System II. Esse kit pode ser utilizado com o kit de fixação dupla 34194A para realizar a montagem de dois instrumentos System II (meia largura, 2U de altura - 88,1 mm) lado a lado.

O kit de suporte tipo flange para montagem em rack 34191A da Keysight é compatível com os DMMs 34460A, 34461A, 34401A, 34410A, 34411A, 34401A e 34420A, as unidades de comutação/aquisição de dados 34970A/34972A, os frequencímetros das séries 531xxA e 53200, os geradores de funções 33120A, 33220/250A, 33521A/33522A e a série 33500B, a maioria das fontes de alimentação E3600 e outros produtos de 2 slots e tamanho de meio rack da Keysight.
 

• Rack cabinet: System II or System II Plus

The Keysight DAQA191A /1CM107A dual rackmount flange kit secures the instrument to the front of the System II cabinet. This kit can be used with the DAQA194A Dual Lock Link Kit to mount two Keysight System II (half-width, 2U height - 88.1mm) instruments side-by-side.

The Keysight DAQA191A/1CM107A is compatible with the Keysight DAQ970A, DAQ973A, 34970A, and 34972A data acquisition systems, the Keysight 34460A, 34461A, 34465A, 34470A, and 34420A DMMs, the Keysight 33500B and 33600A series function generators.

For more information about DAQ, please visit Keysight data acquisition.