MXR2WAV Arbitrary Function Generator for Infiniium MXR-Series, 50 MHz

Use the Wave Generator to send command signals, simulate added channel noise, see frequency response, and stress test your designs with ease.

Bode Plotter function included: Gain and phase plots, automatic gain/phase margin. Frequencymode: single or swept; range from 10 Hz to 50 MHz, and 1 to 1,000 points across the test range.

Output

• Connector: BNC, rear panel
• Voltage range, 50 Ω: 1 mVPP ^[1,9] to 5 VPP ^{[2 ,10]}
• Voltage range, 1 MΩ: 2 mVPP ^[1,9] to 10 VPP ^[2,10]
• Presets:TTL, CMOS (5 V), COMS (3.3 V), CMOS (2.5 V), ECL
• Vertical resolution: 100 µV
• Vertical accuracy: 2% (< 1 kHz)
• Frequency resolution ^[3,8] : 12.5 mHz
• Frequency accuracy ^[4,7]:
  • Square/pulse: 1 ppm (f ≥ 8 kHz), [f/25000] ppm (f < 8kHz)
  • Other waveforms: 1 ppm (f ≥ 5 kHz), 3 ppm (f < 5kHz)
• Modes: Normal, single shot (all but square, pulse, noise, DC)
• Waveforms: DC, sine, square, pulse, triangle/ramp, noise, sinc, exponential rise/fall, cardiac, Gaussian pulse, PRBS
• Protection: Overload automatically disables output
• Isolation: Not available, main output BNC is grounded

DC offset

• Range:
  • ±(8 VDC – Peak AC) into 1 MΩ
  • ±(4 VDC – Peak AC) into 50 Ω
• Resolution: 100 μV or 3 digits, whichever is higher
• Accuracy:
  • Waveform modes: ± 1.5% of offset setting ± 1% of amplitude ± 1 mV
  • DC mode: ± 1.5% of offset setting ± 3 mV

Sine

• Frequency range: 12.5 mHz to 50 MHz
• Amplitude flatness: ± 0.5 dB (≤20 MHz), ± 1 dB (>20 MHz)
• Harmonic distortion: -40 dBc ^[5,1]
• SFDR: Spurious (non-harmonic): -40 dBc ^[6,2]
• THD : 1% ^[7,3]
• SNR: 40 dB ^[8,4]

Square / pulse

• Frequency range: 0.0125 Hz to 20 MHz
• Duty cycle: 20 to 80%, resolution of 1% or 1 ns, whichever is larger
• Pulse width: 10 ns minimum, 1 ns resolution ^[9,5]
  Rise/fall time: 9 ns (10 to 90%)
• Overshoot: < 4%
• Asymmetry (at 50% DC): ±1% ± 5 ns
• Jitter (TIE RMS): 100ps ^[10,6]

Triangle (ramp)

• Frequency range: 12.5 mHz to 200 kHz
• Linearity: 0.01
• Symmetry: 0 to 100%, 1% resolution

Noise

• Bandwidth: 40 MHz

Sine Cardinal (Sinc)

• Frequency range: 12.5 mHz to 1.0 MHz

Exponential Rise/Fall

• Frequency range: 12.5 mHz to 10.0 MHz

Cardiac

• Frequency range: 12.5 mHz to 200.0 kHz

Gaussian Pulse

• Frequency range: 12.5 mHz to 5.0 MHz

PRBS

• Pattern length: 2^7, 2^15, 2^23, 2^31
• Bit rate: 100 bps to 40 Mbps (speeds of 200 MHz divided by an integer value)
• Encoding: NRZ

Modulation

• Types: AM, FM, FSK
• Carriers: Sine, ramp, sine cardinal, exponential rise, exponential fall, and cardiac
• Source: Internal (no external modulation capability)
• AM
  • Profile: sine, square, ramp
  • Frequency: 1 Hz to 20 kHz
  • Depth: 0% to 100%
• FM
  • Profile: sine, square, ramp
  • Frequency: 1 Hz to 20 kHz
  • Minimum carrier: 10 Hz
  • Deviation: 1 Hz to carrier frequency or (2e12 / carrier frequency), whichever is smaller
• FSK
  
  • Modulation: 50% duty cycle square wave
  • FSK rate: 1 Hz to 20 kHz
  • Hop frequency: 2 x FSK rate to 10 MHz

Footnotes:

1. 10 mVPP (1 MΩ) / 5 mVPP (50 Ω) minimum if | DC + Peak AC | ≥ 400mV
2. 8 VPP (1 MΩ) / 4 VPP (50 Ω) maximum for Gaussian waveshape
3. Resolution is Freq/25000 Hz for square and pulse waveforms < 8 kHz
4. Include (add) external reference clock frequency error, if applicable
5. For amplitude ≤1 VPP at 50 MHz, ≤2 VPP at 40 MHz, ≤5 VPP at ≤30 MHz, into 50 Ω load
6. For amplitude ≥5 mVPP into 50 Ω load
7. For amplitude ≤1 VPP at 50 MHz, ≤2 VPP at 40 MHz, ≤5 VPP at ≤30 MHz, into 50 Ω load
8. ≥35 mVPP, 0V offset, into 50 Ω
9. 5 nS if frequency is < 8kHz
10. Amplitude ≥20 mVPP into 50 Ω load