お探しのページはこちらでしょうか.
その他の検索結果:
何をお探しですか？
関連キーワード
No product matches found - System Exception
検索結果
N8211A Performance Analog Upconverter LXI Module, 250 kHz to 40 GHz
販売/サポート
販売・サポート終了製品
販売・サポート終了製品
Prev
後継機種
E8257D PSGアナログ信号発生器、100 kHz～67 GHz
Next
- 概要と特性
- 購入後のアップグレード
- リソース
HIGHLIGHTS
N8211A performance analog upconverter synthetic instrument module is an analog microwave source that generates a stimulus signal by upconverting a baseband signal with superior AM, FM, phase and pulse modulation capabilities (external or internal modulation). The N8211A is based upon the PSG analog signal generator's high output power, low phase noise and excellent level accuracy.
The synthetic instrument family offers the highest-performing RF/MW LAN-based modular instrumentation and the smallest footprint for automated test systems (ATSs); providing the maximum flexibility, and minimizing the cost of an ATS over its lifetime. See a photo of the small modular size mounted in a rack.
Features
- LXI compliant
- Similar performance to the E8257D PSG
- Coherent LO input/output ports allowing use of a common LO signal with multiple upconverters to provide coherent upconversion capability
- CW, digital step, or analog ramp sweeps
- Optional step attenuator; narrow pulse capability; enhanced phase noise performance
| Specifications | |
|---|---|
| Frequency range: | 250 kHz to 20/40 GHz with .001 Hz resolution |
| Sweep types: | CW, digital step, or analog ramp |
| Number of points: | 2 to 65535, or 2 to 1601 per table |
| Triggering: | Auto, external, single, LAN, or trigger bus |
| Output power: | -20 to +13 dBm typical (for 250 kHz to 20 GHz) -20 to +9 dBm typical (for 250 kHz to 40 GHz) |
| Step attenuator: | (Option 1E1) decreases output power by typically 2 dB |
| Narrow pulse: | (Option UNW) decreases output power by typically 3 dB |
| High power: | (Option 1EA) increases output power by typically 5 dB |
| Step attenuator range: | 0 dB and 5 to 115 dB in 10 dB steps |
| Power level accuracy:1 | ±0.6 dB to ±1.0 dB |
| Leveling modes: | Internal and external detectors |
| Spectral purity: | < -55 dBc typical (2 to 20 GHz) < -50 dBc typical (20 to 40 GHz) |
| FM modulation bandwidth: | DC to 1 MHz (typical) |
| AM modulation: | DC coupled, 0 to 100 kHz AC coupled, 10 Hz to 100 kHz, usable to 1 MHz |
| Phase modulation: | 10 to 320 radians, normal bandwidth mode 1 to 32 radians, high bandwidth mode |
| Pulse modulation:2 | * Refer to following 5 lines |
| On/off ratio: | 80 dB |
| Rise/fall times: | 6 ns (typical) |
| Minimum pulse width: | 0.5 µs (typical) |
| Pulse repetition frequency: | DC to 1 MHz |
| Pulse modulation level accuracy: | ±0.5 dB |
| 1 Dependent on frequency and lower level range. 2 For frequencies above 3.2 GHz. |
| Ordering Information | |
|---|---|
| N8211A | Analog upconverter synthetic instrument module |
| N8211A-520 | Frequency range from 250 kHz to 20 GHz |
| N8211A-540 | Frequency range from 250 kHz to 40 GHz |
| N8211A-1E1 | Step attenuator |
| N8211A-1EA | High output power |
| N8211A-UNX | Enhanced phase noise performance |
| N8211A-UNU | Standard pulse modulation |
| N8211A-UNW | Narrow pulse modulation |
| N8211A-UNT | AM, FM, PM modulation |
| N8211A-007 | Analog ramp sweep interface (does not support 8757) |
| N8211A-1EH | Low-band harmonics improved below 2 GHz |
並び替え :
日付
日付
タイトル
Filter Results
この製品の情報はありません。
リセット
コンテンツのタイプ