Acreditamos que esta é a página você estava procurando. Veja o resultado da pesquisa ao invés de:

Chat ao vivo

Entre em contato conosco

Bem-vindo

You are signed as:

Meu Perfil
Sair

Por Favor, Confirme

Confirm your country to access relevant pricing, special offers, events, and contact information.

O que você está procurando?

Pro Oscilloscopes Handheld Spectrum Analyzers Compact Signal Generators Encontre uma solução Obtenha suporte técnico Assista a uma aula Encontre-nos em eventos Equipamentos usados premium KeysightCare

No product matches found - System Exception

10897C High-Resolution VMEbus Laser Axis Board

Status do Produto:

Obsoleto

Suporte técnico

Calibração e Reparo

Solicitar Serviço

Baixe as visões gerais técnicas

Produto de reposição

10897D High-Resolution VMEbus Laser Axis Board

Veja detalhes do produto

Opções de compra ou locação

Visão geral e recursos
Atualizações pós-compra
Recursos

HIGHLIGHTS

The Keysight 10897C VMEbus laser axis board offers the highest measurement resolution commercially available in positioning systems. With resolution up to 0.3 nm, it provides ultra-precise position (or distance) information for advanced products such as IC fabrication equipment. The Keysight 10897C is tested at frequencies equivalent to 0.7 m/s plane mirror slew rates.

The register-programmed position axis board provides a 36-bit position word in fractional wavelengths. The word is readable over the VMEbus and is also available from a real-time hardware output on the A and C rows of the P2 connector. Its very high data rates accommodate high-bandwidth, high-performance closed-loop applications. Configured with appropriate laser and optics components, the Keysight 10897C supplies unsurpassed positioning accuracy for dynamic measurements.

VMEbus Position Output
Data Format:
Units: fractions of a wavelength
2's Complement: choose any 32 of 35 bits to read
Positive Logic
Data Rate Over Backplane: >100 kHz
Sample Data Age:
Fixed: After a synchronous sample operation, the value in the position register will reflect the actual position that occurred approximately X ns before the sample operation was initiated. There are two user-selectable values of X, 290 ns and 790 ns.
Sample Delay:
The position register may be read 100 ns or 600 ns after a hardware sample operation, via the sample delay register bit.
P2 Connector Hardware Position Output
Data Age:
Fixed: The data on the hardware output line will reflect the position that occurred approximately 1.2 us before the next rising edge of the 10 MHz clock.
General Information
VME Compliance:
A16 Data Transfer Cycles
D16 Data Transfer Cycles
A24 Data Transfer Cycles
D32 Data Transfer Cycles
D08(O) Interrupt Acknowledge Cycles
Power Requirements:
5 Vdc + 0.25 V/-0.125 V at less than 3.5 A
+12 V +/-0.5 V at less than 0.1A
-12 V +/-0.5V at less than 0.025A
Cooling Requirements:
19 linear meters (60 linear feet) per minute for 0-40 degrees C operation 76 linear meters (250 linear feet) per minute minimum for 0-55 degrees C operation
Reduced data age ambiguity ensures dynamic accuracy
Low noise rating improves repeatability
Full electrical and mechanical compliance with VMEbus specifications
Programmable signal routing
High reliability backed by three-year warranty
Integrated board functions reduce system size, complexity, development time, and cost

Classificar por :

Data

Data Título

Filter Results

Nenhuma informação encontrada para este produto.

Redefinir

By Type of Content