Accessories

키사이트 U1180A 열전쌍 어댑터 및 리드 세트는 U1250A 시리즈 휴대형 디지털 멀티미터와 호환됩니다. 이 세트에는 J/K 타입 열전쌍 어댑터, 열전쌍 비드 J 타입 및 열전쌍 비드 K 타입이 포함되어 있습니다.

The U1186A consists of a thermocouple bead (K-type) and a mini connector to dual banana plugs.

The operating range for the thermocouple is from -20°C to 200°C.

Accuracy: ±1.1°C.

For more information about temperature measurement units, please visit Temperature Sensors and Temperature Probes.

• K-type bead probe supplied.
• Measures -50°C ~ 1000°C / -58°F ~ 1832°F.
• Slider switch to measure in °C or °F.
• 1 mV/°C or 1mV/°F output.
• Either Alkaline or Carbon-Zinc single standard 9V battery needed.
• To be used with Keysight handheld oscilloscopes or handheld digital multimeters.
  

The U1586B temperature adapter expands the capabilites of your handheld oscilloscope or handheld digital multimeter to measure temperature, either in °C of °F. To be used with a K-type bead thermocouple, and with approximately 1600 hours battery life with an alkaline battery, this adapter ensures you get the most out of your handheld scope or DMM purchase.

The temperature probe measures dryer, transport pipe and surrounding air temperature within the range of -50°C to 800°C.

Measurement accuracy: 0.75% ± 2.2°C.

For more information about temperature measurement units, please visit Temperature Sensors and Temperature Probes.

The temperature probe measures still surface temperature within the range of -50°C to 400°C. U1182A is used together with the U1586B temperature module. U1182A is compatible with the following handheld devices:

• Handheld Clamp Meter – U1212A, U1213A
• Handheld DMM – U1241A, U1241B, U1242A, U1242B, U1251A, U1252B, U1253A, U1253B, U1271A, U1272A
• Handheld Scope – U1602A, U1602B, U1604A, U1604B
• Handheld Calibrator – U1401A, U1401B

For more information about temperature measurement units, please visit Temperature Sensors and Temperature Probes.

The temperature probe measures food, oil, and other liquids temperature within the range of -50°C to 700°C.

Measurement accuracy: 0.75% ± 2.2°C.

For more information about temperature measurement units, please visit Temperature Sensors and Temperature Probes.

키사이트 34307A 열전쌍 키트에는 J타입 열전쌍 10개가 들어 있으며 각 열전쌍의 길이는 180cm(72in.)입니다.

키사이트 34307A는 키사이트 34970A 데이터 수집/스위치 장치와 호환됩니다. 34307A는 또한 키사이트 34401A, 34460A, 34461A와 호환되지만 전압 측정을 온도로 변환하기 위해 외부 프로그램이 필요하며 빙점조 또는 전자 기준 접점을 사용해야 합니다.

• 온도 범위: -40 도 C ~ 150 도 C (-40 도 F ~ 302 도 F)
• 최고 온도: 150 도 C (302 도 F)
• 정확도: 평균 1 도 C 이하 (2 도 F). 장비와 외부 온도에 따라 편차가 있습니다.
• Time constant: 3 초(평균), 공기에서 스틸워터까지
• Dissipation constant: 5.7 mW/degree C(스틸워터에서)
• 스텔레스 스틸 프로프 크기: 1.5 인치(길이) x 0.125 인치(폭)
• 길이: 36 인치 리드
• Termination: 3/4 인치 듀얼 바나나 플러그

The Keysight E2308A is a general purpose temperature probe. The thermistor (5 k ohm at 25 degrees C) is encapsulated in a stainless steel case and typically used for liquid temperature measurements.

The Keysight E2308A is compatible with the Keysight 3458A, 34410A and 34411A, 34405A, multimeter. It can also be used with the 34420A, but doing so requires the probe to be rewired onto the Keysight 34104A Low Thermal Input Connector. The E2308A can also be used with the 34401A, however, it requires an external program to convert the resistance measurements to temperature.

Adapts thermocouple and temperature probes mini connector to dual banana inputs.

For more information about temperature measurement units, please visit Temperature Sensors and Temperature Probes.

The U1185A consists of a thermocouple bead (J-type) and a mini connector to dual banana plugs.

The operating range for the thermocouple is from -20°C to 200°C.

Accuracy: ±1.1°C.

For more information about temperature measurement units, please visit Temperature Sensors and Temperature Probes.