What are you looking for?
Suggested searches
No product matches found - System Exception
Matched content
EL30000 Series Bench Electronic Loads Firmware
キーサイトは、最新のバグ修正とセキュリティパッチを含む、利用可能な最新バージョンを使用することをお勧めします。
| リリース | バージョン | 内容 |
|---|---|---|
| 2023-08-04 | 1.2.9_1.0.6_17_114 | Added new battery test features; Fixed SCPI freezing with parallel mode |
| リリース | バージョン |
|---|---|
| 2023-08-04 | 1.2.9_1.0.6_17_114 |
| Version Description |
|---|
| Added new battery test features; Fixed SCPI freezing with parallel mode |
ダウンロード方法
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .dfu extension.
- Unzip the file to access the .dfu file.
インストール方法
- Refer to EL30000 Firmware Update Instructions.
- It is not necessary to recalibrate the instrument following a firmware update.
ライセンス
- Does Not Require a License
説明資料
アドオン・ソフトウェア/ユーティリティ
Installs on: Instrument
OS
- Windows 7
- Windows 8
- Windows 10
前提知識
Download and install Firmware Update Utility software
対象測定器
- EL33133A, EL34143A, EL34243A
ダウンロード方法
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .dfu file.
インストール方法
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
ライセンス
- Does Not Require a License
説明資料
アドオン・ソフトウェア/ユーティリティ
Installs on: Instrument
OS
- Windows 7
- Windows 8
- Windows 10
前提知識
Download and install Firmware Update Utility software
対象測定器
- EL33133A, EL34143A, EL34243A
ダウンロード方法
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
インストール方法
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
ライセンス
- Does Not Require a License
説明資料
アドオン・ソフトウェア/ユーティリティ
Installs on: Instrument
OS
- Windows 7
- Windows 8
- Windows 10
前提知識
Download and install Firmware Update Utility software
対象測定器
- EL33133A, EL34143A, EL34243A
SHOW MORE