What are you looking for?
Suggested searches
No product matches found - System Exception
Matched content
EL30000 Series Bench Electronic Loads Firmware
Keysight recommends using the most current version, which includes the most up-to-date bug fixes and security patches available.
| Release Date | Version | Version Description |
|---|---|---|
| 2023-08-04 | 1.2.9_1.0.6_17_114 | Added new battery test features; Fixed SCPI freezing with parallel mode |
| Release Date | Version |
|---|---|
| 2023-08-04 | 1.2.9_1.0.6_17_114 |
| Version Description |
|---|
| Added new battery test features; Fixed SCPI freezing with parallel mode |
How to Download
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .dfu extension.
- Unzip the file to access the .dfu file.
How to Install
- Refer to EL30000 Firmware Update Instructions.
- It is not necessary to recalibrate the instrument following a firmware update.
Licensing
- Does Not Require a License
Supporting Documentation
Add-On Software / Utilities
Installs on: Instrument
Operating System
- Windows 7
- Windows 8
- Windows 10
Prerequisites
Download and install Firmware Update Utility software
Supported Instruments
- EL33133A, EL34143A, EL34243A
How to Download
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .dfu file.
How to Install
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Licensing
- Does Not Require a License
Supporting Documentation
Add-On Software / Utilities
Installs on: Instrument
Operating System
- Windows 7
- Windows 8
- Windows 10
Prerequisites
Download and install Firmware Update Utility software
Supported Instruments
- EL33133A, EL34143A, EL34243A
How to Download
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
How to Install
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Licensing
- Does Not Require a License
Supporting Documentation
Add-On Software / Utilities
Installs on: Instrument
Operating System
- Windows 7
- Windows 8
- Windows 10
Prerequisites
Download and install Firmware Update Utility software
Supported Instruments
- EL33133A, EL34143A, EL34243A
SHOW MORE