What are you looking for?
Suggested searches
No product matches found - System Exception
Matched content
EL30000 Series Bench Electronic Loads Firmware
A Keysight recomenda usar a versão mais atual, que inclui as correções de bugs e arquivos de segurança mais atualizados disponíveis.
| Data de lançamento | Versão | Descrição da Versão |
|---|---|---|
| 2023-08-04 | 1.2.9_1.0.6_17_114 | Added new battery test features; Fixed SCPI freezing with parallel mode |
| Data de lançamento | Versão |
|---|---|
| 2023-08-04 | 1.2.9_1.0.6_17_114 |
| Version Description |
|---|
| Added new battery test features; Fixed SCPI freezing with parallel mode |
Como Baixar
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .dfu extension.
- Unzip the file to access the .dfu file.
Como Instalar
- Refer to EL30000 Firmware Update Instructions.
- It is not necessary to recalibrate the instrument following a firmware update.
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows 8
- Windows 10
Pré-requisitos
Download and install Firmware Update Utility software
Instrumentos Compatíveis
- EL33133A, EL34143A, EL34243A
Como Baixar
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .dfu file.
Como Instalar
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows 8
- Windows 10
Pré-requisitos
Download and install Firmware Update Utility software
Instrumentos Compatíveis
- EL33133A, EL34143A, EL34243A
Como Baixar
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
Como Instalar
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Licenciamento
- Does Not Require a License
Documentação de suporte
Software / Utilitários Complementares
Installs on: Instrument
Sistema Operacional
- Windows 7
- Windows 8
- Windows 10
Pré-requisitos
Download and install Firmware Update Utility software
Instrumentos Compatíveis
- EL33133A, EL34143A, EL34243A
SHOW MORE