Choose a country or area to see content specific to your location
-
Produtos + Serviços
-
Osciloscópios + Analisadores
- Osciloscópios
- Analisadores de espectro (Analisadores de sinais)
- Analisadores de Rede
- Analisador Lógico
- Protocol Analyzers and Exercisers
- Testadores de taxa de erro de bit (BERT)
- Analisadores de Figura de Ruído e Fontes de Ruído
- High-Speed Digitizers and Multichannel Data Acquisition Solutions
- Analisadores de Potência AC
- Analisadores de potência CC
- Materials Test Equipment
- Device Current Waveform Analyzers
- Analisadores de Parâmetros e Dispositivos, Traçadores de Curvas
-
Medidores
-
Geradores, Fontes + Potência
-
Software
-
Wireless
-
Instrumentos Modulares
-
Teste de rede
-
Segurança da Rede + Visibilidade
-
Produtos Adicionais
- Sistemas de teste em circuitos - 3070 ICT
- Sistemas e componentes de teste com aplicações específicas
- Soluções de Teste Paramétrico
- Soluções de Medição Fotônica & Lightwave
- Frequência, Tempo, Distância, Grandezas Físicas
- Monolithic Laser Combiners & Precision Optics
- Dispositivos para ondas milimétricas e microondas
-
Serviços
- Todos os produtos, softwares e serviços
-
-
Soluções
- Indústrias
- Insights
- Recursos
- Suporte
- Home
- Produtos e Serviços
- ...
- Application Software
- Network Analyzer Software
- S93094A Spectrum Analysis, beyond 110 GHz [Discontinued]
S93094A Spectrum Analysis, beyond 110 GHz
- Visão geral e recursos
- Atualizações pós-compra
- Recursos
HIGHLIGHTS
- Frequency coverage greater than 110 GHz, up to the limit determined solely by the broadband or banded millimeter-wave frequency extenders used in the system.
- Supported on all PNA /PNA-X test set based millimeter-wave solutions
- Supports broadband N5290A/91A with either 2- or 4-port configurations
- Supports banded waveguide frequencies to above 110 GHz
- Utilize the Cal All feature on the PNA/PNA-X for calibrated spectrum analysis measurements
- DANL for a 500 to 750 GHz WR1.5 is about -106 dBm/Hz (typical)
- Multichannel spectrum analysis at THz frequencies
- Either N5261A/62A or N5292A millimeter-wave controller is required
The S93094A has all of the capability of the S93090xA spectrum analyzer application, with an upper frequency limit determined solely by the broadband or banded millimeter-wave frequency extenders used in the system. With this configuration, the analyzer’s internal receiver attenuators are not in the receiver paths, so they cannot be used to reduce signal levels. External attenuators may be required to avoid compressing the receivers in the millimeter-wave frequency extenders. When using the S93094A for millimeter-wave spectrum analysis, either N5261A/62A or N5292A millimeter-wave controller is required. When S93094A is installed on a standalone network analyzer, it will provide spectrum analysis up to the frequency limit of the instrument.
For more information about Keysight Network Analyzer Software, please visit Network Analyzer Software
- © Keysight Technologies 2000–2022
- Privacidade
- Termos
- Contate o Webmaster