Choose a country or area to see content specific to your location
-
Produtos + Serviços
-
Osciloscópios + Analisadores
- Osciloscópios
- Analisadores de espectro (Analisadores de sinais)
- Analisadores de Rede
- Analisador Lógico
- Protocol Analyzers and Exercisers
- Testadores de taxa de erro de bit (BERT)
- Analisadores de Figura de Ruído e Fontes de Ruído
- High-Speed Digitizers and Multichannel Data Acquisition Solutions
- Analisadores de Potência AC
- Analisadores de potência CC
- Materials Test Equipment
- Device Current Waveform Analyzers
- Analisadores de Parâmetros e Dispositivos, Traçadores de Curvas
-
Medidores
-
Geradores, Fontes + Potência
-
Software
-
Wireless
-
Instrumentos Modulares
-
Teste de rede
-
Segurança da Rede + Visibilidade
-
Produtos Adicionais
-
Serviços
- Todos os produtos, softwares e serviços
-
-
Soluções
- Indústrias
- Insights
- Recursos
- Suporte
- Home
- Produtos e Serviços
- Accessories
- Probes and Probe Accessories
- N2818A Differential Probe with AutoProbe, 10:1, 200 MHz [Discontinued]
N2818A Differential Probe with AutoProbe, 10:1, 200 MHz
- Visão geral e recursos
- Atualizações pós-compra
- Recursos
Highlights
- Wide dynamic range for various applications: ±20V differential, ±60V common mode
- High input resistance and low input capacitance for low probe loading: 1 MΩ//3.5 pF between inputs
- Direct connection to AutoProbe interface (no power supply required)
- Ideal for high-speed power measurements, digital differential buses and vehicle serial buses (CAN, LIN, FlexRay)
The N2818A differential probe provides superior high-speed differential signal measurements required for today’s high-speed power measurements, vehicle bus measurements and high-speed digital system designs. The N2818A differential probe offers 10:1 attenuation setting, allowing it to be used for a broad range of applications. The probe comes with a pair of alligator clips and hook tip clips for use with large and small components in tight places. The differential probe has an input resistance of 1 MΩ and low input capacitance of 3.5 pF to minimize circuit loading. The N2818A probe is compatible with select InfiniiVision and Infiniium oscilloscopes with 50 Ω AutoProbe interface input. The probe is powered directly by the InfiniiVision and Infiniium AutoProbe interface. For use with non-AutoProbe input oscilloscope, use the N2792A.
When probing differential signals inside of environmental chambers at extreme temperatures, Keysight offers the N7013A extreme temperature extension kit. The N7013A is compatible with the N2818A with a de-rated bandwidth of 70 MHz. The 70 cm long differential cable set and accessories can operate in temperatures ranging from -40 degrees to +85 degree Celsius.
- © Keysight Technologies 2000–2022
- Privacidade
- Termos
- Contate o Webmaster