Choose a country or area to see content specific to your location
Können wir Ihnen behilflich sein?
-
-
Integrated Physics Suite
Bridging design and physical testing to evaluate drop, impact, shock, and vibration compliance before hardware exists.
-
Buy an Expert Oscilloscope, Boost Your Bandwidth
Unlock your free upgrade to the next bandwidth tier.
-
End-to-End Validation for AI Data Center
Strengthen 1.6T network reliability for AI-scale workloads from transceivers to interconnects.
-
Take On Complex MIMO Signals
Pair Keysight VSA software with the new XA5 signal analyzer for advanced visualization, demodulation, and analysis — start your 30-day trial today.
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Accelerate Semiconductor Innovation
Explore end-to-end workflows spanning IC design, validation, wafer test, and photonics.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
-
The Right Connection Makes the Measurement
Maximize accuracy and performance with precision accessories engineered for Keysight instruments.
Analyze Complex RF Signals FasterExplore dual-channel and ultra-wideband signal analysis for demanding RF workflows.
Digital Validation. Faster.Get faster, clearer insights with our new multicore, 12-bit oscilloscope up to 33 GHz. Trade in your old oscilloscope and get credit toward a new XR8.
-
-
Purpose-built solutions engineered for the design and test challenges unique to your industry.
Use Cases mapped to every stage of your product lifecycle, from design through operations.
Success Stories
HPE Juniper Networking Builds Next-Gen AI Infrastructure -
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
FeaturedHands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Learning Hub
AI TechnologyExplore methodologies, test strategies, and technical resources for designing, validating, and scaling AI systems and networks.
- Buy
-
Quick access to the most frequent support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 12 of 33
-
1
-
11
No Filter available
Low Noise Test Cables for N1413 with B2980 series, 3m
Easily construct a custom test fixture by converting the terminal configuration with the included connectors
Easily construct a custom test fixture by converting the terminal configuration with the included connectors
Low Noise Test Cables for N1413 with B2980 series, 3m
N1427B
Easily construct a custom test fixture by converting the terminal configuration with the included connectors
- Low Noise Test Cables with 3 m length to support voltage up to 1,000 V
- A built-in interlock circuit enables safe high voltage measurements
The N1427B is designed to operate specifically with the B2985A/87A Electrometer/High Resistance Meter. It comes with a separate triaxial (special screw-type) female connector and a High Voltage BNC (special type) female connector, so that the terminal configuration can be converted to any other configuration. Therefore, custom test fixture can easily be constructed. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1427B to the B2985A/87A.
Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Cables for N1413 with B2980 series, 1.5m
Safely take high voltage measurements up to 1,000 V with this 1.5-m cable
Safely take high voltage measurements up to 1,000 V with this 1.5-m cable
Low Noise Test Cables for N1413 with B2980 series, 1.5m
N1427A
Safely take high voltage measurements up to 1,000 V with this 1.5-m cable
- Low Noise Test Cables with 1.5 m length to support voltage up to 1,000 V
- A built-in interlock circuit enables safe high voltage measurements
The N1427A is designed to operate specifically with the B2985A/87A Electrometer/High Resistance Meter. It comes with a separate triaxial (special screw-type) female connector and a High Voltage BNC (special type) female connector, so that the terminal configuration can be converted to any other configuration. Therefore, custom test fixture can easily be constructed. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1427A to the B2985A/87A.
Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Soldering Sockets for N1425
Construct simple custom-made test leads that support voltage up to 1,000 V
Construct simple custom-made test leads that support voltage up to 1,000 V
Soldering Sockets for N1425
N1426B
Construct simple custom-made test leads that support voltage up to 1,000 V
- Soldering Sockets to support voltage up to 1,000 V
- Used with the N1425 to enables the construction of simple custom-made test leads
The N1426B is used to enables the construction of simple custom-made test leads with the N1425 designed to operate specifically with the B2985A/87A.
Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Pin Probes for N1425
Measure high resistance of small DUTs such as PC boards or IC sockets with the N1425
Measure high resistance of small DUTs such as PC boards or IC sockets with the N1425
Pin Probes for N1425
N1426A
Measure high resistance of small DUTs such as PC boards or IC sockets with the N1425
- Probes to support voltage up to 1,000 V
- Used with the N1425 for high resistance measurement of small DUTs such as PC boards or IC sockets
The N1426A is used to measure high resistance of small DUTs such as PC boards or IC sockets with the N1425 designed to operate specifically with the B2985A/87A.
Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Leads for N1413 with B2980 series, 3m
Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads
Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads
Low Noise Test Leads for N1413 with B2980 series, 3m
N1425B
Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads
- Low noise test leads with 3 m length to support voltage up to 1,000 V
- Electrical noise effects are reduced by the employment of shielded-cables and as a result, high resistance up to 100 GOhm can be measured accurately
- A built-in interlock circuit enables safe high voltage measurements
The N1425B is designed to operate specifically with the B2985A/87A. It can hold DUTs with large terminals being used with the N1426C. The N1426A with the N1425B is available for measurements of small DUTs such as PC boards or IC sockets. The N1426B with the N1425B enables the construction of simple custom-made test leads. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1425B to the B2985A/87A.
Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Leads for N1413 with B2980 series, 1.5m
Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads
Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads
Low Noise Test Leads for N1413 with B2980 series, 1.5m
N1425A
Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads
- Low noise test leads with 1.5 m length to support voltage up to 1,000 V
- Electrical noise effects are reduced by the employment of shielded-cables and as a result, high resistance up to 100 GOhm can be measured accurately
- A built-in interlock circuit enables safe high voltage measurements
The N1425A is designed to operate specifically with the B2985A/87A. It can hold DUTs with large terminals being used with the N1426C. The N1426A with the N1425A is available for measurements of small DUTs such as PC boards or IC sockets. The N1426B with the N1425A enables the construction of simple custom-made test leads. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1425A to the B2985A/87A.
Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Component Test Fixture for N1413 with B2980 Series
Comes with two component modules that can hold SMDs, leads, and various types of devices
Comes with two component modules that can hold SMDs, leads, and various types of devices
Component Test Fixture for N1413 with B2980 Series
N1428A
Comes with two component modules that can hold SMDs, leads, and various types of devices
- SMD, lead and various type of devices are supported
- Triaxial input terminal configuration minimizes the influences due to external noise and as a result, high resistance up to 10 POhm can be measured accurately
- A built-in interlock circuit enables safe high voltage measurements
The N1428A is designed to operate specifically with the B2985A/87A Electrometer/High Resistance Meter. It is provided with two component modules, which are used to hold SMD, lead and various type of devices. Electrical noise effects are reduced by the employment of a shielded case. A built-in interlock circuit enables safe high-voltage measurements. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1428A to the B2985A/87A.
Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Resistivity Cell for N1413 with B2980 Series (50 mm Electrodes)
Accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration.
Accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration.
Resistivity Cell for N1413 with B2980 Series (50 mm Electrodes)
N1424A
Accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration.
- An electrode (diameter: 50mm) can satisfy various insulation measurement standards such as ASTM D-257
- Triaxial input terminal configuration minimizes the influences due to external noise and as a result, high resistance up to 10 POhm can be measured accurately
- A built-in interlock circuit enables safe high voltage measurements
The N1424A is designed to operate specifically with the B2985A/87A Electrometer/High Resistance Meter. It is used to measure surface or volume resistance/resistivity of insulation materials. The N1413A High Resistance Meter Fixture Adapter is required to connect the N1424A to the B2985A/87A.
Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Resistivity Cell for N1413 with B2980 Series(26/50 mm Diameter Electrodes)
Accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration
Accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration
Resistivity Cell for N1413 with B2980 Series(26/50 mm Diameter Electrodes)
N1424B
Accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration
- Electrodes (diameter: 26/50mm) can satisfy various insulation measurement standards such as ASTM D-257
- Triaxial input terminal configuration minimizes the influences due to external noise and as a result, high resistance up to 10 POhm can be measured accurately
- A built-in interlock circuit enables safe high voltage measurements
The N1424B is designed to operate specifically with the B2985A/87A Electrometer/High Resistance Meter. It is used to measure surface or volume resistance/resistivity of insulation materials. The N1413A High Resistance Meter Fixture Adapter is required to connect the N1424B to the B2985A/87A.
Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Resistivity Cell for N1413 with B2980 Series (26/50/76 mm Diameter Electrodes)
Accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration.
Accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration.
Resistivity Cell for N1413 with B2980 Series (26/50/76 mm Diameter Electrodes)
N1424C
Accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration.
- Electrodes (diameter: 26/50/76mm) can satisfy various insulation measurement standards such as ASTM D-257
- Triaxial input terminal configuration minimizes the influences due to external noise and as a result, high resistance up to 10 POhm can be measured accurately
- A built-in interlock circuit enables safe high voltage measurements
The N1424C is designed to operate specifically with the B2985A/87A Electrometer/High Resistance Meter. It is used to measure surface or volume resistance/resistivity of insulation materials. The N1413A High Resistance Meter Fixture Adapter is required to connect the N1424C to the B2985A/87A.
Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Differenzial-Sensor , großer Dynamikbereich, 100 MHz
Der Differenzialsensor CX1105A mit ultrageringem Rauschen bietet dynamische Strommessungen von 1 µA bis 100 A mit einer Bandbreite von bis zu 100 MHz, wenn Shuntwiderstände vorhanden sind.
Der Differenzialsensor CX1105A mit ultrageringem Rauschen bietet dynamische Strommessungen von 1 µA bis 100 A mit einer Bandbreite von bis zu 100 MHz, wenn Shuntwiderstände vorhanden sind.
Differenzial-Sensor , großer Dynamikbereich, 100 MHz
CX1105A
Der Differenzialsensor CX1105A mit ultrageringem Rauschen bietet dynamische Strommessungen von 1 µA bis 100 A mit einer Bandbreite von bis zu 100 MHz, wenn Shuntwiderstände vorhanden sind.
- Rauschärmste differenzielle Messung der Industrie
- Die nicht-intrusive Verbindung zum Prüfling nutzt die bestehenden Shuntwiderstände des Kunden
- Bis zu 100 A Stromsignal-Messung
- Rauscharme Strommessung ab 1 μA
- Maximale Standalone-Bandbreite: 100 MHz
- Breiter Gleichtakt-Spannungsbereich: bis zu ±40 V oder ±6 V
- Mitgelieferte praktische abgeschirmte Twisted-Pair-Kabel
Der Differenzialsensor mit extrem niedrigem Rauschen CX1105A bietet die besten Rauschmerkmale der Industrie und ermöglicht ein breites Spektrum an dynamischen Strommessungen von 1 µA bis 100 A, indem die bestehenden Shuntwiderstände der Evaluation- oder Testboards genutzt werden. Er misst den Spannungsabfall über den Shuntwiderstand und konvertiert das gemessene Spannungssignal in ein Stromsignal im Grundgerät CX3300. Die maximale Bandbreite der Messung liegt bei bis zu 100 MHz, wodurch Sie das detaillierte Stromprofil und die Leistungsintegrität des PDN (Power Delivery Network, Stromversorgungsnetzwerk) von IoT-Geräten, Mobilgeräten, Automobil-Elektronik usw. messen und analysieren können. Mit den mitgelieferten abgeschirmten Twisted-Pair-Kabeln können Sie direkt mit den dynamischen Strommessungen beginnen.
Stromsensor mit wählbaren Shuntwiderständen, ±40 V, 20 MHz
Der Stromsensor CX1104A mit wählbaren Shuntwiderständen ist ein Zubehörteil für die Serie CX3300 und ermöglicht dynamische Strommessungen von 1 μA bis 15 A mit bis zu 20 MHz Bandbreite.
Der Stromsensor CX1104A mit wählbaren Shuntwiderständen ist ein Zubehörteil für die Serie CX3300 und ermöglicht dynamische Strommessungen von 1 μA bis 15 A mit bis zu 20 MHz Bandbreite.
Stromsensor mit wählbaren Shuntwiderständen, ±40 V, 20 MHz
CX1104A
Der Stromsensor CX1104A mit wählbaren Shuntwiderständen ist ein Zubehörteil für die Serie CX3300 und ermöglicht dynamische Strommessungen von 1 μA bis 15 A mit bis zu 20 MHz Bandbreite.
- Verwenden Sie einen verfügbaren kalibrierten Widerstandsmesskopf (CX1211A bis CX1216A)
- Strom-Signal-Messung mit bis zu 15 A
- Rauscharme Strommessung ab 1 μA
- Geringer Einfügewiderstand dank der Widerstandsmessköpfe: 5,5 mΩ bis 1 Ω
- Maximale Standalone-Bandbreite: 20 MHz
- Flacher Frequenzgang ohne Frequenz-Derating
- Weiter Gleichtakt-Spannungsbereich: bis zu ±40 V
- Mitgelieferter Bananenadapter für einfachere Messung höherer Ströme
Der Stromsensor CX1104A mit auswählbaren Shuntwiderständen ermöglicht dynamische Strommessungen von 1 μA bis 15 A mittels rauscharmer Messtechnologie. Mit den sechs verfügbaren kalibrierten Widerstandsmessköpfen CX1211A bis CX1216A können Sie dynamische Strommessungen im jeweils angemessenen Messbereich vornehmen. Da der Einfügewiderstand dieser Widerstandssensoren mit 5,5 mΩ bis 1 Ω recht niedrig liegt, müssen Sie sich keine Sorgen über den Spannungsabfall über den Sensor machen. Der Frequenzgang des CX1104A lässt sich ohne größere Schwankungen auf 20 MHz erweitern, und im Gegensatz zu vielen anderen Stromsonden tritt kein Frequenz-Derating auf. Da der Widerstandsmesskopf kalibriert ist, können Sie präzisere Messungen als je zuvor durchführen. Für praktische Hochstrom-Messungen wird ein Bananenadapter mitgeliefert.
