Choose a country or area to see content specific to your location
What are you looking for?
-
-
3D Interconnect Designer
3D Interconnect Designer provides a flexible modeling and optimization environment for any advanced interconnect structure, including chiplets, stacked die, packages, and PCBs.
-
Save up to 50% on an XR8 Oscilloscope
Get faster digital validation for less with a trade-in.
-
Discover Keysight AI Data Center Builder
Emulate every part of your data center infrastructure. Emulate Anything. Optimize Everything.
-
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Precision In-Circuit Testing for Production
Achieve fast, accurate board-level testing with robust inline and offline ICT designed for modern manufacturing.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
448 Gb/s Waveform Generation
Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.
-
Stream 120 MHz I/Q Data to Your Laptop in the FieldPinpoint interference with post-processing spectrum management software in the lab.
Find the Right ATE Power SolutionUse this selector tool to quickly identify the best power supply for your aerospace and defense ATE requirements.
-
- Solutions
-
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
FeaturedHands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Success Stories
HPE Juniper Networking Builds Next-Gen AI Infrastructure -
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 12 of 33
No Filter available
No Filter available
No Filter available
Triaxial Cable, 500 V, 3 m
N1412B 500 V triaxial cable, 3 m; prevents leakage current during ultra-low current measurements below 1 nA.
N1412B 500 V triaxial cable, 3 m; prevents leakage current during ultra-low current measurements below 1 nA.
Triaxial Cable, 500 V, 3 m
N1412B
N1412B 500 V triaxial cable, 3 m; prevents leakage current during ultra-low current measurements below 1 nA.
- Up to 500 V triaxial cable with 3 m length
The N1412B is a triaxial cable up to 500 V with 3 m length. It is recommended to use a triaxial cable to prevent leakage current through the measurement cable when you need to perform less than low current measurement (< 1 nA).
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Triaxial Cable, 500 V, 1.5 m
N1412A 500 V triaxial cable, 1.5 m; prevents leakage current during ultra-low current measurements below 1 nA.
N1412A 500 V triaxial cable, 1.5 m; prevents leakage current during ultra-low current measurements below 1 nA.
Triaxial Cable, 500 V, 1.5 m
N1412A
N1412A 500 V triaxial cable, 1.5 m; prevents leakage current during ultra-low current measurements below 1 nA.
- Up to 500 V triaxial cable with 1.5 m length
The N1412A is a triaxial cable up to 500 V with 1.5 m length. It is recommended to use a triaxial cable to prevent leakage current through the measurement cable when you need to perform less than low current measurement (< 1 nA).
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Triaxial Cable, 500 V, 6 m
N1412C 500 V triaxial cable, 6 m; prevents leakage current during ultra-low current measurements below 1 nA.
N1412C 500 V triaxial cable, 6 m; prevents leakage current during ultra-low current measurements below 1 nA.
Triaxial Cable, 500 V, 6 m
N1412C
N1412C 500 V triaxial cable, 6 m; prevents leakage current during ultra-low current measurements below 1 nA.
- Up to 500 V triaxial cable with 6 m length
The N1412C is a triaxial cable up to 500 V with 6 m length. It is recommended to use a triaxial cable to prevent leakage current through the measurement cable when you need to perform less than low current measurement (< 1 nA).
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Resistivity Cell for N1413 (50 mm Electrodes)
N1424A Resistivity Cell for N1413 (50 mm Electrodes) accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration.
N1424A Resistivity Cell for N1413 (50 mm Electrodes) accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration.
Resistivity Cell for N1413 (50 mm Electrodes)
N1424A
N1424A Resistivity Cell for N1413 (50 mm Electrodes) accurately measure high resistance up to 10 PΩ with triaxial input terminal configuration.
- An electrode (diameter: 50mm) can satisfy various insulation measurement standards such as ASTM D-257.
- Triaxial input terminal configuration minimizes the influences due to external noise and as a result, high resistance up to 10 POhm can be measured accurately.
- A built-in interlock circuit enables safe high voltage measurements.
The N1424A is designed to operate specifically with the B2985B/87B Electrometer/High Resistance Meter. It is used to measure surface or volume resistance/resistivity of insulation materials. The N1413A High Resistance Meter Fixture Adapter is required to connect the N1424A to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Resistivity Cell for N1413 (26/50 mm Electrodes)
N1424B Resistivity Cell for N1413 (26/50 mm Electrodes) accurately measures high resistance up to 10 PΩ with triaxial input terminal configuration.
N1424B Resistivity Cell for N1413 (26/50 mm Electrodes) accurately measures high resistance up to 10 PΩ with triaxial input terminal configuration.
Resistivity Cell for N1413 (26/50 mm Electrodes)
N1424B
N1424B Resistivity Cell for N1413 (26/50 mm Electrodes) accurately measures high resistance up to 10 PΩ with triaxial input terminal configuration.
- Electrodes (diameter: 26/50mm) can satisfy various insulation measurement standards such as ASTM D-257
- Triaxial input terminal configuration minimizes the influences due to external noise and as a result, high resistance up to 10 POhm can be measured accurately
- A built-in interlock circuit enables safe high voltage measurements
The N1424B is designed to operate specifically with the B2985B/87B Electrometer/High Resistance Meter. It is used to measure surface or volume resistance/resistivity of insulation materials. The N1413A High Resistance Meter Fixture Adapter is required to connect the N1424B to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Cables For N1413 With B2980 Series, 3m
Easily construct a custom test fixture by converting the terminal configuration with the included connectors.
Easily construct a custom test fixture by converting the terminal configuration with the included connectors.
Low Noise Test Cables For N1413 With B2980 Series, 3m
N1427B
Easily construct a custom test fixture by converting the terminal configuration with the included connectors.
- Low Noise Test Cables with 3 m length to support voltage up to 1,000 V
- A built-in interlock circuit that safely measures high voltage
The N1427B is designed to operate specifically with the B2985B/87B Electrometer/High Resistance Meter. It comes with a separate triaxial (special screw-type) female connector and a High Voltage BNC (special type) female connector. This allows terminal configuration to be converted to any other configuration. Therefore, custom test fixture can easily be constructed. The N1413A High Resistance Meter Fixture Adapter is required to connect the N1427B to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Cables For N1413 With B2980 Series, 1.5 m
Safely take high voltage measurements up to 1,000 V with this 1.5 m cable.
Safely take high voltage measurements up to 1,000 V with this 1.5 m cable.
Low Noise Test Cables For N1413 With B2980 Series, 1.5 m
N1427A
Safely take high voltage measurements up to 1,000 V with this 1.5 m cable.
- Low Noise Test Cables with 1.5 m length to support voltage up to 1,000 V
- A built-in interlock circuit that safely measure high voltage
The N1427A is designed to operate specifically with the B2985B/87B Electrometer/High Resistance Meter. It comes with a separate triaxial (special screw-type) female connector and a High Voltage BNC (special type) female connector. This allows terminal configuration to be converted to any other configuration. Therefore, custom test fixture can easily be constructed. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1427A to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Soldering Sockets For N1425
Construct simple custom-made test leads that support voltage up to 1,000 V.
Construct simple custom-made test leads that support voltage up to 1,000 V.
Soldering Sockets For N1425
N1426B
Construct simple custom-made test leads that support voltage up to 1,000 V.
- Soldering Sockets to support voltage up to 1,000 V
- Used with the N1425 to enables the construction of simple custom-made test leads
The N1426B is used to enables the construction of a simple custom-made test leads with the N1425 designed to operate specifically with the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Pin Probes For N1425
Measure high resistance of small DUTs such as PC boards or IC sockets with the N1425.
Measure high resistance of small DUTs such as PC boards or IC sockets with the N1425.
Pin Probes For N1425
N1426A
Measure high resistance of small DUTs such as PC boards or IC sockets with the N1425.
- Probes to support voltage up to 1,000 V
- Used with the N1425 for high resistance measurement of small DUTs such as PC boards or IC sockets
The N1426A is used to measure high resistance of small DUTs such as PC boards or IC sockets with the N1425 designed to operate specifically with the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Leads for N1413 with B2980 Series, 3m
Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads.
Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads.
Low Noise Test Leads for N1413 with B2980 Series, 3m
N1425B
Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads.
- Low noise test leads with 3 m length to support voltage up to 1,000 V
- Electrical noise effects are reduced by the employment of shielded-cables and as a result, high resistance up to 100 GOhm can be measured accurately
- A built-in interlock circuit enables safe high voltage measurements
The N1425B is designed to operate specifically with the B2985B/87B. It can hold DUTs with large terminals being used with the N1426C. The N1426A with the N1425B is available for measurements of small DUTs such as PC boards or IC sockets. The N1426B with the N1425B enables the construction of simple custom-made test leads. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1425B to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Leads for N1413 with B2980 Series, 1.5m
Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads.
Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads.
Low Noise Test Leads for N1413 with B2980 Series, 1.5m
N1425A
Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads.
- Low noise test leads with 1.5 m length to support voltage up to 1,000 V
- Electrical noise effects are reduced by the employment of shielded-cables and as a result, high resistance up to 100 GOhm can be measured accurately
- A built-in interlock circuit enables safe high voltage measurements
The N1425A is designed to operate specifically with the B2985B/87B. It can hold DUTs with large terminals being used with the N1426C. The N1426A with the N1425A is available for measurements of small DUTs such as PC boards or IC sockets. The N1426B with the N1425A enables the construction of simple custom-made test leads. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1425A to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Component Test Fixture for N1413 with B2980 Series
Comes with two component modules that can hold SMDs, leads, and various types of devices
Comes with two component modules that can hold SMDs, leads, and various types of devices
Component Test Fixture for N1413 with B2980 Series
N1428A
Comes with two component modules that can hold SMDs, leads, and various types of devices
- SMD, lead, and various types of devices are supported.
- Triaxial input terminal configuration minimizes the influences due to external noise, and as a result, high resistance up to 10 POhm can be measured accurately.
- A built-in interlock circuit enables safe high-voltage measurements.
The N1428A is designed to operate specifically with the B2985B / 87B electrometer / high resistance meter. It is provided with two component modules, which are used to hold SMD, lead, and various types of devices. Electrical noise effects are reduced by the employment of a shielded case. A built-in interlock circuit enables safe high-voltage measurements. The N1413A high resistance meter fixture adapter is also required to connect the N1428A to the B2985B / 87B.
