Choose a country or area to see content specific to your location
What are you looking for?
-
-
3D Interconnect Designer
3D Interconnect Designer provides a flexible modeling and optimization environment for any advanced interconnect structure, including chiplets, stacked die, packages, and PCBs.
-
Save up to 50% on an XR8 Oscilloscope
Get faster digital validation for less with a trade-in.
-
Discover Keysight AI Data Center Builder
Emulate every part of your data center infrastructure. Emulate Anything. Optimize Everything.
-
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Precision In-Circuit Testing for Production
Achieve fast, accurate board-level testing with robust inline and offline ICT designed for modern manufacturing.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
448 Gb/s Waveform Generation
Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.
-
Stream 120 MHz I/Q Data to Your Laptop in the FieldPinpoint interference with post-processing spectrum management software in the lab.
Find the Right ATE Power SolutionUse this selector tool to quickly identify the best power supply for your aerospace and defense ATE requirements.
-
- Solutions
-
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
FeaturedHands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Success Stories
HPE Juniper Networking Builds Next-Gen AI Infrastructure -
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 12 of 33
No Filter available
No Filter available
No Filter available
Triaxial Cable, 500 V, 1.5 m
N1412A 500 V triaxial cable, 1.5 m; prevents leakage current during ultra-low current measurements below 1 nA.
N1412A 500 V triaxial cable, 1.5 m; prevents leakage current during ultra-low current measurements below 1 nA.
Triaxial Cable, 500 V, 1.5 m
N1412A
N1412A 500 V triaxial cable, 1.5 m; prevents leakage current during ultra-low current measurements below 1 nA.
- Up to 500 V triaxial cable with 1.5 m length
The N1412A is a triaxial cable up to 500 V with 1.5 m length. It is recommended to use a triaxial cable to prevent leakage current through the measurement cable when you need to perform less than low current measurement (< 1 nA).
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Triaxial Cable, 500 V, 6 m
N1412C 500 V triaxial cable, 6 m; prevents leakage current during ultra-low current measurements below 1 nA.
N1412C 500 V triaxial cable, 6 m; prevents leakage current during ultra-low current measurements below 1 nA.
Triaxial Cable, 500 V, 6 m
N1412C
N1412C 500 V triaxial cable, 6 m; prevents leakage current during ultra-low current measurements below 1 nA.
- Up to 500 V triaxial cable with 6 m length
The N1412C is a triaxial cable up to 500 V with 6 m length. It is recommended to use a triaxial cable to prevent leakage current through the measurement cable when you need to perform less than low current measurement (< 1 nA).
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Cables For N1413 With B2980 Series, 3m
Easily construct a custom test fixture by converting the terminal configuration with the included connectors.
Easily construct a custom test fixture by converting the terminal configuration with the included connectors.
Low Noise Test Cables For N1413 With B2980 Series, 3m
N1427B
Easily construct a custom test fixture by converting the terminal configuration with the included connectors.
- Low Noise Test Cables with 3 m length to support voltage up to 1,000 V
- A built-in interlock circuit that safely measures high voltage
The N1427B is designed to operate specifically with the B2985B/87B Electrometer/High Resistance Meter. It comes with a separate triaxial (special screw-type) female connector and a High Voltage BNC (special type) female connector. This allows terminal configuration to be converted to any other configuration. Therefore, custom test fixture can easily be constructed. The N1413A High Resistance Meter Fixture Adapter is required to connect the N1427B to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Cables For N1413 With B2980 Series, 1.5 m
Safely take high voltage measurements up to 1,000 V with this 1.5 m cable.
Safely take high voltage measurements up to 1,000 V with this 1.5 m cable.
Low Noise Test Cables For N1413 With B2980 Series, 1.5 m
N1427A
Safely take high voltage measurements up to 1,000 V with this 1.5 m cable.
- Low Noise Test Cables with 1.5 m length to support voltage up to 1,000 V
- A built-in interlock circuit that safely measure high voltage
The N1427A is designed to operate specifically with the B2985B/87B Electrometer/High Resistance Meter. It comes with a separate triaxial (special screw-type) female connector and a High Voltage BNC (special type) female connector. This allows terminal configuration to be converted to any other configuration. Therefore, custom test fixture can easily be constructed. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1427A to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Leads for N1413 with B2980 Series, 3m
Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads.
Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads.
Low Noise Test Leads for N1413 with B2980 Series, 3m
N1425B
Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads.
- Low noise test leads with 3 m length to support voltage up to 1,000 V
- Electrical noise effects are reduced by the employment of shielded-cables and as a result, high resistance up to 100 GOhm can be measured accurately
- A built-in interlock circuit enables safe high voltage measurements
The N1425B is designed to operate specifically with the B2985B/87B. It can hold DUTs with large terminals being used with the N1426C. The N1426A with the N1425B is available for measurements of small DUTs such as PC boards or IC sockets. The N1426B with the N1425B enables the construction of simple custom-made test leads. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1425B to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Low Noise Test Leads for N1413 with B2980 Series, 1.5m
Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads.
Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads.
Low Noise Test Leads for N1413 with B2980 Series, 1.5m
N1425A
Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads.
- Low noise test leads with 1.5 m length to support voltage up to 1,000 V
- Electrical noise effects are reduced by the employment of shielded-cables and as a result, high resistance up to 100 GOhm can be measured accurately
- A built-in interlock circuit enables safe high voltage measurements
The N1425A is designed to operate specifically with the B2985B/87B. It can hold DUTs with large terminals being used with the N1426C. The N1426A with the N1425A is available for measurements of small DUTs such as PC boards or IC sockets. The N1426B with the N1425A enables the construction of simple custom-made test leads. The N1413A High Resistance Meter Fixture Adapter is also required to connect the N1425A to the B2985B/87B.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Component Test Fixture for N1413 with B2980 Series
Comes with two component modules that can hold SMDs, leads, and various types of devices
Comes with two component modules that can hold SMDs, leads, and various types of devices
Component Test Fixture for N1413 with B2980 Series
N1428A
Comes with two component modules that can hold SMDs, leads, and various types of devices
- SMD, lead, and various types of devices are supported.
- Triaxial input terminal configuration minimizes the influences due to external noise, and as a result, high resistance up to 10 POhm can be measured accurately.
- A built-in interlock circuit enables safe high-voltage measurements.
The N1428A is designed to operate specifically with the B2985B / 87B electrometer / high resistance meter. It is provided with two component modules, which are used to hold SMD, lead, and various types of devices. Electrical noise effects are reduced by the employment of a shielded case. A built-in interlock circuit enables safe high-voltage measurements. The N1413A high resistance meter fixture adapter is also required to connect the N1428A to the B2985B / 87B.
High Resistance Measurement Universal Adapter
N1414A High Resistance Measurement Universal Adapter is used to simplify the connection for high resistance measurements by B2980A series electrometer.
N1414A High Resistance Measurement Universal Adapter is used to simplify the connection for high resistance measurements by B2980A series electrometer.
High Resistance Measurement Universal Adapter
N1414A
N1414A High Resistance Measurement Universal Adapter is used to simplify the connection for high resistance measurements by B2980A series electrometer.
- Simplifies cabling without considering common or ground connections
- Easy attachment
- Manual switch for selecting floating or grounded DUT
The N1414A is an adapter to simplify the connection for high resistance measurements by B2980B Series Electrometer/High Resistance Meter (B2985B, B2987B). With this accessory, you can only use a triaxial cable for current measurement and a banana cable to bias the DUT (a high value resistor).
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Triax to Alligator Cable, 200 V, 1.5 m
Provides easy and convenient current measurements for the B2980B series.
Provides easy and convenient current measurements for the B2980B series.
Triax to Alligator Cable, 200 V, 1.5 m
N1415A
Provides easy and convenient current measurements for the B2980B series.
- Easy and convenient measurements for the B2980B series
- 1.5m with colored alligator clips
The N1415A is a 1.5m triax to alligator cable for the B2980B series of Femto/Picoammeters and Electrometers. It is convenient to make quick current measurements more than 1nA, but using appropriate shielding enables less than 1nA current measurements. The N1415A can be also used for other quick measurements such as voltage, resistance and charge. Red clip = center conductor, black = inner shield (guard), green = outer shield.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
High Resistance Meter Fixture Adapter
Converts connections for high resistance meter accessories and enables them to be controlled by B2980B series electrometers
Converts connections for high resistance meter accessories and enables them to be controlled by B2980B series electrometers
High Resistance Meter Fixture Adapter
N1413A
Converts connections for high resistance meter accessories and enables them to be controlled by B2980B series electrometers
- Accommodates three cables for the N1424, N1425, N1427, and N1428
- Easy attachment
- 4-pin terminal plug for interlock connection
- Manual switch for selecting floating or grounded DUT
The N1413A is an adapter to convert connections for the accessories such as N1424, N1425, N1427, and N1428. It enables them to be controlled by the B2980B electrometers (B2985B, B2987B). See the B2980B manual on how to use the adapter.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Starter kit for B2985/B2987
Includes cable (N1415A) and adapter (N1414A) set for easy and convenient measurements with B2985A/B2987A.
Includes cable (N1415A) and adapter (N1414A) set for easy and convenient measurements with B2985A/B2987A.
Starter kit for B2985/B2987
N1410A
Includes cable (N1415A) and adapter (N1414A) set for easy and convenient measurements with B2985A/B2987A.
- Cable (N1415A) and adapter (N1414A) set for easy and convenient measurements by B2985B/B2987B
- More affordable than purchasing these accessories separately
The N1410A is a starter kit for B2985B and B2987B Electrometer/High Resistance Meter and includes N1414A High resistance measurement universal adapter and N1415A Triax to alligator cable. The N1414A helps you setup the cables and makes the cabling setup easier. The N1415A is recommended to measure more than 1 nA current, but you can probably measure less than 1 nA current with appropriately shielding.
Learn more about Keysight B2980B Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.
Alligator Clips For N1425
Enables the N1425 to hold DUTs with large terminals while supporting up to 1,000 V.
Enables the N1425 to hold DUTs with large terminals while supporting up to 1,000 V.
Alligator Clips For N1425
N1426C
Enables the N1425 to hold DUTs with large terminals while supporting up to 1,000 V.
The Keysight N1426C enables the N1425 to hold devices under test (DUTs) with large terminals. The N1425 operates with the B2985A / 87A.
- Alligator clips support up to 1,000 V.
- They enable the N1425 to hold DUTs with large terminals.
Learn more about Keysight B2980A Series femtometer / picoammeters and electrometers / high-resistance meters.
