Accessories

• Maximum voltage: 42 V
• Termination: 5 single banana plugs (4-wire measurements plus ground)
• Length: cable is 0.8 meters (31.5 inches)

The Keysight kelvin probe set consists of two gold-plated flat tweezers with special gripping surfaces. This design assures a very precise contact to the component and very precise measurements. The ground guard connector removes ground-related errors. The gold plating helps to reduce the contact resistance between the surfaces of the test probe and the lead of the component being measured - reducing overall error!

The Keysight 11059A is compatible with the Keysight 34460A, 34461A, 34401A, 3458A, 34410A, 34411A, 34465A, 34470A digital multimeters and B2900 series precision source / measure units.

The N6708A is filler panel kit is for use with the N6700C, N6701C, or N6702C Low-Profile Modular Power System Mainframes. For proper operation of these mainframes, any empty slots must be filled with a filler panel. The filler panel kit contains 3 filler panels, so each kit can fill up to 3 empty slots.

The N6708A filler panel kit is also orderable as option FLR on any N6700 Low-Profile Power System Mainframe.

• Want to mix and match modules? See all available N6700 modules

The Keysight N6709C is a rack mount kit that provides all the necessary hardware to rack mount one N6700C, N6701C, or N6702C modular system power supply in 1U rack space. This rackmount kit includes front rack ears and rear supports that take the place of standard rack rails or slides. Note: Standard rack rails and slides are not compatible with the N6700 Series as they block the air inlets on the side of the mainframe.

The N6709C rack mount kit is also orderable as option 908 on any N6700 Series modular system power supply.

The Keysight 10833A (1 meter) GPIB cable is engineered for exceptional reliability and durability even under the harshest conditions. When you buy Keysight GPIB cables, you can be sure of automatic, seamless compatibility between computers and instruments throughout your system. GPIB interface cables, cards, and software for your computers make it easy for you to access and control instruments and exchange data - and it all starts with the cables to connect your computer and instrument. Keysight GPIB cables are fully compatible with the IEEE 488.1 mechanical specification.

To quickly establish instrument connection on a PC, download and install Keysight IO Libraries Suite

Automate and perform data analysis on your test system easily with Keysight VEE Pro

Counterfeits of this or closely related products have been found in the market. To ensure you are purchasing an authentic Keysight product with the quality and performance you expect, purchase through Keysight authorized distribution partners. Click on the “How to Buy or Rent” button, above, to find authorized distribution partners.

Learn more about Keysight GPIB Products and Cables

• This rack mount kit can secure 1 to 4 units of the E36100B Series DC power supplies horizontally in the rack

The Keysight E36110A rackmount kit is designed to secure 1 - 4 units of E36100B Series DC power supplies horizontally in a standard 19-inch rack cabinet. They are designed to fit in two rack-units (2U) of space.

The Keysight E36110A is compatible with the Keysight E36102B, E36103B, E36104B, E36105B, and E36106B.

For more information about Keysight rack mount kits, please visit rack mount kits and components.

The Keysight 10833D (0.5 meter) GPIB cable is engineered for exceptional reliability and durability even under the harshest conditions. When you buy Keysight GPIB cables, you can be sure of automatic, seamless compatibility between computers and instruments throughout your system. GPIB interface cables, cards, and software for your computers make it easy for you to access and control instruments and exchange data - and it all starts with the cables to connect your computer and instrument. Keysight GPIB cables are fully compatible with the IEEE 44.1 mechanical specification.

To quickly establish instrument connection on a PC, download and install Keysight IO Libraries Suite

Automate and perform data analysis on your test system easily with Keysight VEE Pro

Counterfeits of this or closely related products have been found in the market. To ensure you are purchasing an authentic Keysight product with the quality and performance you expect, purchase through Keysight authorized distribution partners. Click on the “How to Buy or Rent” button, above, to find authorized distribution partners.

Learn more about Keysight GPIB Products and Cables

The Keysight 10833B (2 meter) GPIB cable is engineered for exceptional reliability and durability even under the harshest conditions. When you buy Keysight GPIB cables, you can be sure of automatic, seamless compatibility between computers and instruments throughout your system. GPIB interface cables, cards, and software for your computers make it easy for you to access and control instruments and exchange data - and it all starts with the cables to connect your computer and instrument. Keysight GPIB cables are fully compatible with the IEEE 488.1 mechanical specification.

To quickly establish instrument connection on a PC, download and install Keysight IO Libraries Suite

Automate and perform data analysis on your test system easily with Keysight VEE Pro

Counterfeits of this or closely related products have been found in the market. To ensure you are purchasing an authentic Keysight product with the quality and performance you expect, purchase through Keysight authorized distribution partners. Click on the “How to Buy or Rent” button, above, to find authorized distribution partners.

The Keysight 10833C (4 meter) GPIB cable is engineered for exceptional reliability and durability even under the harshest conditions. When you buy Keysight GPIB cables, you can be sure of automatic, seamless compatibility between computers and instruments throughout your system. GPIB interface cables, cards, and software for your computers make it easy for you to access and control instruments and exchange data - and it all starts with the cables to connect your computer and instrument. Keysight GPIB cables are fully compatible with the IEEE 488.1 mechanical specification.

To quickly establish instrument connection on a PC, download and install Keysight IO Libraries Suite

Automate and perform data analysis on your test system easily with Keysight VEE Pro

Counterfeits of this or closely related products have been found in the market. To ensure you are purchasing an authentic Keysight product with the quality and performance you expect, purchase through Keysight authorized distribution partners. Click on the “How to Buy or Rent” button, above, to find authorized distribution partners.

• Outer Dimensions: 10 inches x 20 inches x 15.5 inches (h x w x d)
• Weight: 14 lbs.

The Keysight 34131A is a transit case. This heavy-duty hard cover carrying case is constructed from rugged A.B.S. and has a rubber-grip, steel handles and steel latches. Extra storage beneath the instrument can hold manuals and other accessories. The case can be padlocked for security. Its foam mold fits most 2-slot, half rack sized Keysight instruments.

The Keysight 34131A is compatible with the Keysight 34460A, 34461A, 34401A, 34410A, 34411A, and 34420A DMMs, the Keysight 34970A/34972A Data Acquisition/Switch Units, the Keysight 531xxA and 53200 Series frequency counters, the Keysight 33120A, 33220/250A, 33521A/33522A, and 33500B series function generators, most E3600 power supplies and other 2-slot, half rack sized Keysight products.

Learn more about Data Acquisition Accessories and Options

Keysight offer variety of accessories for digital multimeters, learn more about Keysight new digital multimeter accessories

The N5740A rack-mount slide kit makes it easy to integrate an N5700 or N8700 series system DC power supply into a test rack by providing all the necessary hardware to rack mount an N5700 series power supply in only 1 U of rack space or to rack mount an N8700 series power supply in 2 U of rack space.

This rack-mount kit is compatible with the following models: N5741A-N5752A, N5761A-N5772A, N8731A-N8742A, and N8754A-N8762A.

The RP7909A rack mount kit makes it easy to integrate a RP7900 Series regenerative power system into a 19-inch EIA rack cabinet. This rack mount kit includes slide rails, and flange mounts (without ears).

This rack mount kit is compatible with the following models: RP7951A - 53A, RP7961A - 63A.

Learn more about RP7900 Regenerative Power System
 

• Rack cabinet: System II or System II Plus

The Keysight 34190A (5063-9240) rackmount kit is designed for use with only one instrument, mounted on either the left or the right side of the rack. The kit includes one rack flange and one half-rack width filler panel, 4 screws to attach the instrument, 4 rack screws with nuts and installation instructions in English. 

The Keysight 34190A is compatible with the Keysight 34460A, 34461A, 34470A DMMs, the Keysight 34970A/34972A  Data Acquisition/Switch Units, the Keysight 531xxA and 53200 Series frequency counters, the Keysight 33500 and 33600 series function generators, most E3600 power supplies and other 2-slot, half rack sized Keysight products.

Learn more about Data Acquisition Accessories and Options