Here's the page we think you wanted. See search results instead:

Keysight offers a wide array of cables, cable assemblies, and leads engineered for exceptional reliability and durability even under the harshest conditions. When you buy Keysight GPIB cables, you can be sure of automatic, seamless compatibility between computers and instruments throughout your system.

Accessory Cables

Automotive Adapters

Automotive Adapter AE6952A MATEnet Cable

Automotive Adapter AE6952A MATEnet Cable

AE6952A Automotive MATEnet to MATEnet cable is designed with frequency range from DC to 1 GHz and transmit up to 1 Gbps, length of 1m.

Automotive Adapter AE6953A Mini-50 cable

Automotive Adapter AE6953A Mini-50 cable

Automotive Adapter AE6953A Mini 50 cable is designed for Automotive Ethernet MDI interface connections, with frequency range up to 6 GHz, length of 1m.

Automotive Adapter AE6954A H-MTD cable

Automotive Adapter AE6954A H-MTD cable

AE6954A Automotive cable Rosenberger H-MTD cable (1m) is designed with frequency range from DC to 10 GHz for Automotive Ethernet MDI interface connections.

Cable Adapters

Cable Assembly

11500A Cable Assembly, Type-N (m) to Type-N (m), DC to 6.0 GHz

11500A Cable Assembly, Type-N (m) to Type-N (m), DC to 6.0 GHz

Offers low reflection, high repeatability, and solid mechanical integrity.

11500B Cable Assembly, Type-N (m) to Type-N (m), DC to 6.0 GHz

11500B Cable Assembly, Type-N (m) to Type-N (m), DC to 6.0 GHz

Offers low reflection, high repeatability, and solid mechanical integrity.

N2823A Cable Assembly, Coaxial Phased-matched Pair, 1 m

N2823A Cable Assembly, Coaxial Phased-matched Pair, 1 m

Extend the cable length of your test fixtures using this 1-m, flexible coax cable assembly with 2.92-mm (m) connectors

N5448B Cable Assembly, Coaxial Phased-matched Pair, 25 cm

N5448B Cable Assembly, Coaxial Phased-matched Pair, 25 cm

Extend the cable length of your test fixtures using this 25-cm, flexible coax cable assembly with 2.92-mm (m) connectors.

Y1740A Cable Assembly

Recommended for Keysight PXI VNA (M983xA/M980xA) or Streamline Series VNAs

Cables

Flexible Cables

85133E Flexible Cable, 2.4 mm

85133E Flexible Cable, 2.4 mm

Achieve phase stability with this 97-cm cable when a DUT is connected, with adapter, directly to the test set port.

85133F Flexible Cable Set, 2.4 mm

85133F Flexible Cable Set, 2.4 mm

Achieve phase stability with these 63-cm cables when a DUT is connected between cable ends.

85133H Flexible Cable, 2.4 mm

85133H Flexible Cable, 2.4 mm

Achieve phase stability with this 63-cm cable featuring a 2.4-mm female to 2.4-mm male connector.

85134E Flexible Cable, 2.4 mm to 3.5 mm

85134E Flexible Cable, 2.4 mm to 3.5 mm

Achieve phase stability with this 97.2-cm cable when a DUT is connected, with adapter, directly to the test set port.

85134F Flexible Cable Set, 2.4 mm to 3.5 mm

85134F Flexible Cable Set, 2.4 mm to 3.5 mm

Achieve phase stability with these 62.9-cm cables when a DUT is connected between cable ends.

85134H Flexible Cable, 2.4 mm to 3.5 mm

85134H Flexible Cable, 2.4 mm to 3.5 mm

Achieve phase stability with this 62.9-cm cable featuring a 2.4-mm female to 3.5-mm male connector.

85135E Flexible Cable, 2.4 mm to 7 mm

85135E Flexible Cable, 2.4 mm to 7 mm

Achieve phase stability with this 97.2-cm cable when a DUT is connected, with adapter, directly to the test set port.

85135F Flexible Cable Set, 2.4 mm To 7 mm

85135F Flexible Cable Set, 2.4 mm To 7 mm

Achieve phase stability with these 62.9-cm cables when a DUT is connected between cable ends.

N4697J Flexible Test Cable, 1.85 mm

N4697J Flexible Test Cable, 1.85 mm

Use this 96.5-cm cable when a DUT is connected, with adapter, directly to the test set port

N4697K Flexible Test Cable Set, 1.85 mm

N4697K Flexible Test Cable Set, 1.85 mm

Use these 62.9-cm cables when a DUT is connected between cable ends

GPIB Cables

Kits

16195B Calibration Kit, 7 mm

Calibration kit for Keysight RF LCR meters, impedance / material analyzers, and network analyzers

3446ACCU Upgrade - Accessory Kit for 34460A - Test Leads, USB Cable

3446ACCU Upgrade - Accessory Kit for 34460A - Test Leads, USB Cable

3446ACCU provides the accessory kit for the 34460A, including the test leads and USB cable.

N1410A Starter kit for B2985/B2987

N1410A Starter kit for B2985/B2987

Includes cable (N1415A) and adapter (N1414A) set for easy and convenient measurements with B2985A/B2987A.

N2755A MSO Cable Kit, 8-Channel

N2755A MSO Cable Kit, 8-Channel

N2755A is a low-cost 8-channel MSO cable kit allows you to easily probe far-apart pins. It includes flying lead cable, 3 right-angle grounds, 3 ground extenders.

N2756A MSO Cable Kit, 16-Channel

N2756A MSO Cable Kit, 16-Channel

Easily probe far-apart pins; includes flying lead cable, 5 right-angle grounds, 5 ground extenders, and 18 grabbers

N9311X RF and Microwave Accessory Kit

N9311X RF and Microwave Accessory Kit

N9311X RF and Microwave Accessory Kit complements Keysight's low-cost handheld and benchtop solutions. Select the accessories for your measurement needs.

U1161A Extended Test Lead Kit

U1161A Extended Test Lead Kit

Includes one black and one red lead, two test probes, alligator clips, and 4 mm banana plugs

U1168A Standard Test Lead Kit

U1168A Standard Test Lead Kit

Compatible with the U1230/40/50/70 handheld DMMs; includes test leads, test probes, alligator clips, and SMT and mini grabbers.

U1168B Standard Test Lead Kit

U1168B Standard Test Lead Kit

Get started on all your troubleshooting tasks with this complete set of DMM probes with leads, clips, and grabbers

U8201A Combo Test Lead Kit

U8201A Combo Test Lead Kit

Designed for use with U3606A DMM | DC power supply; includes leads, probes, alligator clips, SMT grabbers, and banana plugs.

U8202A Electronic Test Lead Kit

U8202A Electronic Test Lead Kit

Designed for use with the U3606A DMM and DC power supply; includes leads, alligator clips, mini grabbers, and more.

Y1243A Cable Kit for M9301A LO Distribution

Y1243A Cable Kit for M9301A LO Distribution

Y1243A Cable Kit for M9301A local oscillator (LO) distributes 4 LO output signals from the M9301A PXIe synthesizer to up to 4 channels within one chassis.

Y1244A Cable Kit for Synchronizing Two M9018A PXIe Chassis

Y1244A Cable Kit for Synchronizing Two M9018A PXIe Chassis

The Y1244A Cable Kit is used with M9381A PXIe vector signal generator and M9391A PXIe vector signal analyzer to synchronize two M9018A PXIe chassis.

Y1157A 9 to 10-pin cable kit for Y1150A, Y1152A, Y1154A

Y1157A 9 to 10-pin cable kit for Y1150A, Y1152A, Y1154A

Kit comes with supplies to build 4 cables for Y1150A, Y1152A, and Y1154A

Y1158A 10 to 10 / 10 to 14-pin cable kit for Y1153A, Y1154A

Y1158A 10 to 10 / 10 to 14-pin cable kit for Y1153A, Y1154A

Kit comes with supplies to build 2 cables for Y1153A and Y1154A

Y1159A 16-to-16 pin cable kit for Y1150A/51A/52A/53A/54A/55A

Y1159A 16-to-16 pin cable kit for Y1150A/51A/52A/53A/54A/55A

Kit comes with supplies to build 2 cables for Y1150A/51A/52A/53A/54A/55A

Laser Head Cable

Leads

16048A Test Lead, BNC Connector to BNC Connector Board

16048A Test Lead, BNC Connector to BNC Connector Board

Extend the measurement port with a four-terminal-pair configuration that enables the attachment of user-fabricated test fixtures.

16048E Test Leads

16048E Test Leads

Extend the measurement port with a 4-terminal-pair configuration that allows attachment of user-fabricated test fixtures

16089A Large Kelvin Clip Lead

16089A Large Kelvin Clip Lead

Measure odd-shaped components that you cannot measure using conventional fixtures

16089B Medium Kelvin Clip Lead

16089B Medium Kelvin Clip Lead

Measure odd-shaped components that you cannot measure using conventional fixtures

16089C Kelvin IC Clip Lead

16089C Kelvin IC Clip Lead

Measure odd-shaped components that you cannot measure using conventional fixtures

34133A Precision Electronic Test Leads

34133A Precision Electronic Test Leads

Use these small, light weight, leads with small components and dense circuit boards.

34137A Deluxe test lead set for the 3458A

34137A Deluxe test lead set for the 3458A

Set includes 2 retractable sheaths, 2 fine tip probes, 2 SMT grabbers, and 1 mini grabber; works with the 3458A DMM

34138A Test Lead Set

34138A Test Lead Set

Contains fixed sheath banana plugs, retractable sheath probes, fine tip probes, and grabbers

E5381B Differential Flying Leads with 90-Pin Cable Connector

E5381B Differential Flying Leads with 90-Pin Cable Connector

E5381B flying lead set acquire signals from randomly located points in your target, and measure signals with ≥ 200 mV Vmax-Vmin signal amplitude.

E5382B Single-Ended Flying Leads with 90-Pin Cable Connector

E5382B Single-Ended Flying Leads with 90-Pin Cable Connector

E5382B Single-Ended Flying Leads acquire signals from randomly located points in your target, and measure signals with ≥ 250 mV p-p signal amplitude.

E5383B Single-Ended Flying Leads With 40-Pin Cable Connector

E5383B Single-Ended Flying Leads With 40-Pin Cable Connector

E5383B Single-Ended Flying Leads acquire signals from randomly located points in your target, and measure signals with ≥ 600 mV p-p signal amplitude.

N1425A Low Noise Test Leads for N1413 with B2980 Series, 1.5m

N1425A Low Noise Test Leads for N1413 with B2980 Series, 1.5m

Accurately measure high resistance up to 100 GΩ with these 1.5-m shielded test leads.

N1425B Low Noise Test Leads for N1413 with B2980 Series, 3m

N1425B Low Noise Test Leads for N1413 with B2980 Series, 3m

Accurately measure high resistance up to 100 GΩ with these 3 m shielded test leads.

U1169A Test Probe Leads, with 19-mm Tips and 4-mm Tips

U1169A Test Probe Leads, with 19-mm Tips and 4-mm Tips

Use with handheld DMMs; consists of insulated test leads, 19-mm-tips test probes, and 4-mm tips test probes

U1580A DMM Terminal Test Lead

U1580A DMM Terminal Test Lead

Compatible with the U1600A series handheld digital oscilloscope probes and test leads

U1781A Alligator Clip Leads

U1781A Alligator Clip Leads

The Keysight U1781A is to be used with the U1700 Series Handheld Capacitor and LCR meters. These clips are shipped as standard with every handheld capacitor or handheld LCR meter.

U4203A Single-Ended 34-Channel Flying Lead

U4203A Single-Ended 34-Channel Flying Lead

Use this general purpose, flying lead probe with 16850A Series portable logic analyzers

U4324A PCIe 3.0 Flying Lead Solder Down Probe

U4324A PCIe 3.0 Flying Lead Solder Down Probe

Provides signal capture when no PCIe slot connector or PCIe standard mid bus footprint is available

Power Sensor Cables

Receiver Cables

10790B Receiver Cable, 10 m

10790B Receiver Cable, 10 m

Perform a quick and accurate installation with this cable that connects to multiple measurement electronics.

10880A Receiver Cable, 5 m

10880A Receiver Cable, 5 m

Minimize measurement errors with this cable that connects to PCI or VME axis boards.

10880B Receiver Cable, 10 m

10880B Receiver Cable, 10 m

Minimize measurement errors with this cable that connects to PCI or VME axis boards.

10880C Receiver Cable, 20 m

10880C Receiver Cable, 20 m

Minimize measurement errors with this cable that connects to PCI or VME axis boards.

N1250A High Performance Receiver Cable, 5 M

N1250A High Performance Receiver Cable, 5 M

Achieve high performance with this cable that connects the measurement signal from an external receiver to an axis board.

N1250B High Performance Receiver Cable, 10 M

N1250B High Performance Receiver Cable, 10 M

Achieve high performance with this cable that connects the measurement signal from an external receiver to an axis board.

N1250F High Performance Receiver Cable,

N1250F High Performance Receiver Cable,

Achieve high performance with this cable that connects the measurement signal from an external receiver to an axis board

N1250E High Performance Receiver Cable, 12 M

N1250E High Performance Receiver Cable, 12 M

Achieve high performance with this cable that connects the measurement signal from an external receiver to an axis board.

Test Port Cables

Tips

N5440A InfiniiMax III 28 GHz Ceramic ZIF Tips

N5440A InfiniiMax III 28 GHz Ceramic ZIF Tips

InfiniiMax III Zero Insertion Force (ZIF) Probe Tips

N5447A InfiniiMax III 28 GHz Ceramic High Sensitivity ZIF Tips

N5447A InfiniiMax III 28 GHz Ceramic High Sensitivity ZIF Tips

InfiniiMax III High Sensitivity Zero Insertion Force (ZIF) Probe Tips

N5476A InfiniiMax III Browser Replacement Tips (Kit of 4)

N5476A InfiniiMax III Browser Replacement Tips (Kit of 4)

Replacement browser probe tips for the N5445A browser head

Triaxial Cables

Other Cables, Cable Assemblies, Leads

10884B Power Supply

The Keysight 10884B Power Supply converts AC power into ±15V power to operate a single Keysight laser head and the multiple Keysight receivers that make up a Keysight laser transducer or laser calibrator system.

11059A Kelvin Probe Set

11059A Kelvin Probe Set

Reduce ground-related errors and contact resistance through gold-plated flat tweezers and special gripping surfaces

E1735A USB Axis Module

E1735A USB Axis Module

Small and light weight, the Keysight E1735A USB Axis Module allows users to interface the laser, remote control, and optional A Quad B input cable to any PC.

N1298A High Current Ultra Low Noise Filter, 21 V/500 mA, 10 Ω

N1298A High Current Ultra Low Noise Filter, 21 V/500 mA, 10 Ω

The N1298A Series is a collection of low noise filters for the Keysight B2960 Series 6.5-digit low noise source.

N1298B Ultra Low Noise Filter, 42 V/105 mA, 50 Ω

N1298B Ultra Low Noise Filter, 42 V/105 mA, 50 Ω

The N1298 Series is a collection of low noise filters for the Keysight B2960 Series 6.5-digit low noise source.

N1298C Low Noise Filter, 210 V/3 A

N1298C Low Noise Filter, 210 V/3 A

The N1298 Series power source accessories are a collection of low noise filters for the Keysight B2960 Series precision source / measure units (SMUs).

N1426A Pin Probes For N1425

N1426A Pin Probes For N1425

Measure high resistance of small DUTs such as PC boards or IC sockets with the N1425.

N1426B Soldering Sockets For N1425

N1426B Soldering Sockets For N1425

Construct simple custom-made test leads that support voltage up to 1,000 V.

U1163A SMT Grabbers

U1163A SMT Grabbers

Use with standard test leads and handheld digital multimeters (DMMs) and clamp meters

U1782B SMD Tweezer

U1782B SMD Tweezer

Use with the U1700 handheld capacitor and handheld LCR meter to easily measure SMD-type components

View All Cables, Cable Assemblies and Leads

Want help or have questions?

Contact Us