Accessories

The N1297A banana-triax adapter for 2-wire (non-Kelvin) connection supports low current measurement for less than 1 nA by enabling the use of high-performance triaxial cables. This solution makes it easy to connect to both triaxial-based test fixtures and wafer probers.

The N1297B is the banana-triax adapter for 4-wire (Kelvin) connection supports low current measurement for less than 1 nA by enabling the use of high-performance triaxial cables. This solution makes it easy to connect to both triaxial-based test fixtures and wafer probers.

The RP5905C Rack Mount Kit includes everything needed to mount RP5900 series DC regenerative power supplies and EL4900 series DC electronic loads in a standard 2U rack space. It includes rack flanges, support rails, and attachment hardware for secure installation.

The RP5904C Rack Mount Kit includes everything needed to mount RP5900 series DC regenerative power supplies and EL4900 series DC electronic loads in a standard 1U rack space. It includes rack flanges, support rails, and attachment hardware for secure installation.

The RP7909A rack mount kit makes it easy to integrate a 5kW or 10 kW RP7900 Series regenerative power system into a 19-inch EIA rack cabinet. This rack mount kit includes slide rails, and flange mounts (without ears).

This rack mount kit is compatible with the following models: RP7931A - RP7963A.

The N5740A rack-mount slide kit makes it easy to integrate an N5700, N8700, and DP5700 series system DC power supply into a test rack by providing all the necessary hardware to rack mount an N5700 series power supply and a DP5700 series power supply in only 1 U of rack space or to rack mount an N8700 series power supply in 2 U of rack space.

This rack-mount kit is compatible with the following models:

• N5700 series: N5741A–N5752A, N5761A–N5772A,
• N8700 series: N8731A–N8742A, N8754A–N8762A.
• DP5700 series: DP5741AL/H/S–DP5756AL/H/S, DP5761AL/H–DP5776AL/H

The DP5701A half-rack mount kit makes it easy to integrate your 1.5 kW DP5700 series DC power supplies into a standard rack setup. Use it to securely mount a half-rack unit alone or alongside a full-rack power supply for a clean, professional installation.

Compatible Models (for 1.5 kW models only):

DP5721A, DP5722A, DP5723A, DP5724A, DP5726A, DP5728A, DP5730A, DP5731A, DP5733A, DP5736A

The N7910A rack mount kit can be used for all Advanced Power System (APS) N6900A and N7900A Series power supplies, regardless if they are 1 kW or 2 kW form factors. It can also be used for mounting the N7909A power dissipater unit. The N7910A is intended for use in a 19-inch EIA rack cabinet.

Save 10% on the E36731ABP bundle

The Keysight E36731ABP battery emulation bundle is a comprehensive, all-in-one solution that combines hardware and software. It includes the E36731A 200 W battery emulator and profiler, and a perpetual license for the Keysight PW9253A PathWave Advanced Battery Test and Emulation software.

The bundle enables you to:

• Generate accurate battery profiles using the simulated current drain of a device and employ the resulting profiles for emulation, saving time and simplifying the process.
• Accelerate battery drain analysis by instantly transitioning a battery’s charge state and displaying real-time data. This increases efficiency and provides faster insight into the current drain.
• Validate battery run time and aging effects by automating current drain analysis and battery cycle testing.

Download this flyer to learn more about this bundle.

• Maximum voltage: 42 V
• Termination: 5 single banana plugs (4-wire measurements plus ground)
• Length: cable is 0.8 meters (31.5 inches)

The Keysight kelvin probe set consists of two gold-plated flat tweezers with special gripping surfaces. This design assures a very precise contact to the component and very precise measurements. The ground guard connector removes ground-related errors. The gold plating helps to reduce the contact resistance between the surfaces of the test probe and the lead of the component being measured - reducing overall error!

The Keysight 11059A is compatible with the Keysight 34460A, 34461A, 34401A, 3458A, 34410A, 34411A, 34465A, 34470A digital multimeters and B2900 series precision source / measure units.

Add a GPIB interface to your EL30000 Series bench electronic load.

The N6708A filler panel kit is for use with the N6700C, N6701C, or N6702C Low-Profile Modular Power System Mainframes. For proper operation of these mainframes, any empty slots must be filled with a filler panel. The filler panel kit contains 3 filler panels, so each kit can fill up to 3 empty slots.

The N6708A filler panel kit is orderable as option FLR with any N6700 Low-Profile Power System Mainframe.

• Want to mix and match modules? See all available N6700 modules