Accessories

The M1749B is the only Remote Radio Head supporting bi-directional testing at five mmWave frequency bands with one hardware set. Two RF ports support Tx and Rx verification. Confidently test over the air at mmWave frequencies in the 24, 28, 39, 40 GHz, and 47 GHz bands using one M1749B remote radio head (RRH). Verify Tx and Rx performance of 5G RFFEs, base stations, chipsets, and devices using stimulus and analysis provided by one of several Keysight platforms. M1749B delivers an additional +3 dBm power compared to M1749A.

• Frequency range of 9 kHz to 6 GHz
• Wide dynamic range of -60 to +20 dBm
• Internal zeroing capability to eliminate external calibration
• High measurement speed of up to 250 readings/second
• Support internal/external trigger measurements, internal triggering, and trace display
• Compatible with other Keysight instruments
• Your instrument can be controlled at no additional cost using the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). This app simplifies instrument connection and control. Download the BenchVue Basic Power Meter/Sensor App (BV0007B). Note that the basic version does not include KeysightCare support and is one revision behind the licensed version. For access to the latest features and support, the licensed (paid) version of the BenchVue Power Meter/Sensor Control and Analysis App is available.

Internal Triggering and Trace Display Capability

Internal triggering allows triggering based on the burst signal envelope, eliminating the need for an external signal. The trace display provides a graphical view of the signal envelope to assist with gate placement and trigger level setup. All U2000 power sensors, except for the U2004A, feature these capabilities.

The Y1217A is a rail kit designed for the M9010A, M9018B, and M9019A when used in a Keysight rack. It can be used with both the rack mount kit and the cable tray kit. The kit includes support rails and attachment hardware. An M9018B or M9019A that is racked using this rail kit and the cable tray uses 5U of rack space. This kit is not compatible with the Y1270A Front Panel Interfacing Kit.

The 34138A test lead set includes:

• test lead probes with retractable sheath (2)
• fine tip probes (2)
• SMT Grabbers (2)
• mini Grabber (1)

The Keysight 34138A test lead set for digital multimeters contains fixed sheath banana plugs.

The Keysight 34138A is compatible with the 34460A, 34461A, 34401A, 34405A, 34410A, 34411A, L4411A, and U2741A digital multimeters. The 34138a is not compatible with the 3458A instead use the 34137A with 3458A.

• termination: fixed sheath banana plugs
• length: 1.4 meters
• rating: 1000 V CAT II
• safety: IEC 61010-031

The M9010A PXIe 10-slot Gen 3 chassis delivers flexibility, compatibility, and performance in a smaller form-factor ideal for bench-top applications. With 8 PXIe hybrid slots, it gives the system designer flexibility to mix and match the number and location of PXIe and hybrid-compatible modules. The maximum performance, PCIe® switch fabric can operate up to Gen 3 providing up to 24 GB/s of system data bandwidth. The new cooling design provides exceptional per-slot cooling while at the same time producing much less fan noise than the typical PXI chassis. It is also designed for easy maintenance and has features for combining multiple chassis together or integrating with other non-PXI instrumentation

Applications

• Aerospace and Defense
• Electronic test
• Communications

Functionality

• 10 total slots; including 8 PXIe hybrid slots, 1 PXIe timing slot, and 1 PXIe system slot
• 8 PXIe Hybrid Slots
• 830 W total DC power (220-240V input) and 42 W/ slot cooling
• Powerful cooling with low fan noise
• Ultra-high performance Gen 3 PCIe switching with a two-link (x8, x16) system slot and x8 links to the hybrid/timing slots
• High data bandwidth (maximum 24 GB/s system and 8 GB/s slot-to-slot)
• Multi-chassis power-sequencing and front panel external trigger inputs/outputs
• Specified up to 55 ºC and 10,000 ft operating conditions

Performance characteristics

• Advanced PCIe switch fabric that operates up to Gen 3 speeds and provides x8 links to module slots
• Backplane speeds of up to 24 GB/s from an external controller to the PXIe module slots
• Ultra-quiet, high capacity cooling

Applications

• Aerospace and Defense
• Electronic test
• Communications

Functionality

• 18 total slots: 16 PXIe hybrid slots, 1 PXIe timing slot, and 1 PXIe system slot
• Multi-chassis power-sequencing and front panel external trigger inputs/outputs
• 800 W useable DC power (220-240 V input) and 42 W/slot cooling

Performance characteristics

• Ultra-high performance Gen 3 PCIe switching with a two-link (x8, x16) system slot and x8 links to the hybrid/timing slots
• High data bandwidth (maximum 24 GB/s system and 8 GB/s slot-to-slot)
• Innovative cooling design that allows chassis to fit into 4U of rack space in most cases

The Keysight M9019A PXIe 18-slot Gen 3 chassis delivers the flexibility, compatibility, and performance required for demanding applications. With 16 PXIe hybrid slots, it gives the system designer more flexibility to mix and match the number and location of PXIe and hybrid-compatible modules. The ultra-high performance, PCIe® switch fabric can operate up to Gen 3 providing up to 24 GB/s of system data bandwidth. Combine the M9019A with the M9022A/23A/24A PXIe System Modules and M9048B/49A PCIe Desktop Adapters to achieve up to a Gen 3 x16 PCIe link to an external PC.

The M9019A has an innovative cooling design which allows the chassis to fit into 4U of rack space in most cases. When combined with the latest 1U rack-mounted computer, a powerful system can be built in only 5U of rack space. Additionally, optional “air-inlet” modules can be used to supply more cool air from the front of the chassis.

The Keysight E7770A common interface unit (CIU) provides a bidirectional intermediate frequency (IF) interface to the device under test (DUT) by up- or down-converting a sub-6 GHz uplink or downlink RF signal into a 6 to 12 GHz, or 7.7 to 14.5 GHz IF signal. This solution gives you the control, power, and local oscillator frequency input to the Keysight M1740A millimeter-wave (mmWave) transceiver for 5G remote radio heads (RRHs). As an up/down converter and RRH controller, the CIU supports the extension of the frequency coverage from sub-6 GHz to a high IF and mmWave bands.

The CIU is a key component of a wide range Keysight 5G solutions. These solutions provide the stimulus and analysis capabilities necessary to verify transceiver (Tx) and receiver (Rx) performance for 5G chipsets, devices, and base stations.

Quickly validate DUT performance over-the-air (OTA) with chambers designed for different test cases across the device workflow.

Applications

• Wireless communications
• Aerospace and defense

Functionality

• Multiple outputs: Five 100 MHz, one 10 MHz and one OCXO
• Locks to an external reference with a value from 1 to 110 MHz.
• Many programmatic interfaces enable easy integration into existing test environments

Performance characteristics

• 1-slot PXIe
• Low phase noise
• 100 MHz output amplitude ≥ 10 dBm

The M9300A PXIe frequency reference is a PXIe compatible compact modular instrument that can be used with the Keysight M9301A synthesizer, M9310A source output and M9311A modulator to create the world’s fastest vector signal generator, the M9381A. It can also be used with the M9301A and M9310A to create a CW source, the M9380A or as the 10 MHz or 100 MHz reference with other PXI solutions. Instrument control is provided through a soft front panel and programmatic interfaces tuned to your application development environment of choice.

Uncompromising values

• Reduces development time and simplifies integration into existing test environments with multiple drivers and programmatic interfaces.
• Reduces startup time with Keysight IO libraries easy configuration, one-step software install, and soft front panel.
• Fast repair turn-around time with Calibrated Core Exchange strategy.

The Y1213A provides five, single-slot PXI filler panels with EMC gaskets.

• Rackmount kit centers the M9010A in the middle of the rack
• Can be used to either flush-mount or recess-mount the chassis (recess depth is adjustable)
• Requires the Y1217A Rack Rail Kit

The Y1271A is a complete rack-mounting kit for the M9010A PXIe Chassis. It includes rack flanges, handles, and attachment hardware. This kit allows you to mount the Keysight M9010A PXIe chassis flush with the front of the rack or to recess it up to 140 mm (5.5 inches) in 20 mm steps. Recessing the chassis allows for better cable management. The Y1217A Rack Rail kit is required and is ordered separately. A minimum of 1U or rack space is required for ventilation above the chassis.

• Allows the chassis to be rackmounted in 4U of space
• Recesses the chassis by 4 inches
• Can be used with optional cable tray and rail kits

The Y1216A is a complete rack-mounting kit for the M9018A PXIe chassis. It includes rack flanges, handles, and attachment hardware. It suspends the chassis in a Keysight Rack using only 4U of rack space. It also recesses the chassis by 4 inches. Rack rails may be needed in a non-Keysight rack and are ordered separately. When rails are used, the chassis will require 5U of rack space.

The Y1218A is a cable tray kit designed for the M9018B and M9019A. It can be used with both the rack mount kit and the rail kit but, the rail kit is not required. The kit includes a cable tray, feet for using the chassis on a table, and attachment hardware. An M9018B or M9019A that is racked using the cable tray uses 5U of rack space. The tray is compatible with the Y1217A Rack Mount Rail Kit, the Y1215B/C Flush Mount and Y1216A/B Recessed Mount Rack Adapter kits. This tray is not compatible with the Y1270A Front Panel Interfacing Kit.