Accessories

• Frequency range of 9 kHz to 6 GHz
• Wide dynamic range of -60 to +20 dBm
• Internal zeroing capability to eliminate external calibration
• High measurement speed of up to 250 readings/second
• Support internal/external trigger measurements, internal triggering, and trace display
• Compatible with other Keysight instruments
• Your instrument can be controlled at no additional cost using the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). This app simplifies instrument connection and control. Download the BenchVue Basic Power Meter/Sensor App (BV0007B). Note that the basic version does not include KeysightCare support and is one revision behind the licensed version. For access to the latest features and support, the licensed (paid) version of the BenchVue Power Meter/Sensor Control and Analysis App is available.

Internal Triggering and Trace Display Capability

Internal triggering allows triggering based on the burst signal envelope, eliminating the need for an external signal. The trace display provides a graphical view of the signal envelope to assist with gate placement and trigger level setup. All U2000 power sensors, except for the U2004A, feature these capabilities.

The M9300A PXIe frequency reference is a PXIe-compatible, compact, modular instrument that can be used with the Keysight M9301A synthesizer, M9310A source output, and M9311A modulator to create the world’s fastest vector signal generator, the M9381A. Create a CW source, the M9380A, by combining the M9300A with the M9301A and M9310A or use it as the 10-MHz or 100-MHz reference with other PXI solutions. Control the instrument through a soft front panel and programmatic interfaces tuned to your application development environment of choice.

• Reduce development time and simplify integration into existing test environments with multiple drivers and programmatic interfaces.
• Reduce startup time with Keysight IO libraries' easy configuration, one-step software install, and soft front panel.
• Realize fast repair turn-around time with Calibrated Core Exchange.

• x8 connectors to match up with Keysight AXIe, PXIe chassis, and system modules
• Up to PCIe Gen 3 operation
• 2.0 m length

The Y1202A PCIe cable is primarily used to connect a PXIe or AXIe chassis to a desktop or rack-mount computer. Hence, it is the perfect companion to the Keysight M9048A, M9048B, and M9049A.

• Allows the chassis to be rack mounted in 4U of space
• Can be used with optional cable tray and rail kits

The Y1215C is a complete rack-mounting kit for the M9018B and M9019A PXIe chassis. It includes rack flanges, handles, and attachment hardware. It suspends the chassis in a Keysight rack using only 4U of rack space. This kit is not compatible with the Y1270A Front Panel Interfacing Kit

Rack rails may be needed in a non-Keysight rack and are ordered separately. When rails are used, the chassis will require 5U of rack space.
 

The Y1213A provides five, single-slot PXI filler panels with EMC gaskets.

• Set of five, single-slot slot-blockers
• Made with static dissipative PC/ABS molding compound which prevents the slot blockers from holding a charge

The Y1212A is a kit of five plastic slot-blockers to be used any PXI chassis. These can be placed in empty slots to help improve airflow through PXI modules. Require the use of a blank PXI filler panels.

The 34138A test lead set includes:

• Test lead probes with retractable sheath (2)
• Fine tip probes (2)
• SMT Grabbers (2)
• Mini Grabber (1)

The Keysight 34138A test lead set for digital multimeters contains fixed sheath banana plugs.

The Keysight 34138A is compatible with the 34460A, 34461A, 34401A, 34405A, 34410A, 34411A, L4411A, and U2741A digital multimeters. 34138a is not compatible with 3458A instead use 34137A with 3458A.

• Termination: fixed sheath banana plugs
• Length: 1.4 meters
• Rating: 1000 V CAT II
• Safety: IEC 61010-031

For more information about Keysight test leads and probes for multimeters, please visit Multimeter Test Leads and Probes.

The Keysight E7770A common interface unit (CIU) provides a bidirectional intermediate frequency (IF) interface to the device under test (DUT) by up- or down-converting a sub-6 GHz uplink or downlink RF signal into a 6 to 12 GHz, or 7.7 to 14.5 GHz IF signal. This solution gives you the control, power, and local oscillator frequency input to the Keysight M1740A millimeter-wave (mmWave) transceiver for 5G remote radio heads (RRHs). As an up/down converter and RRH controller, the CIU supports the extension of the frequency coverage from sub-6 GHz to a high IF and mmWave bands.

The CIU is a key component of a wide range Keysight 5G solutions. These solutions provide the stimulus and analysis capabilities necessary to verify transceiver (Tx) and receiver (Rx) performance for 5G chipsets, devices, and base stations.

Quickly validate DUT performance over-the-air (OTA) with chambers designed for different test cases across the device workflow.

The Y1217A is a rail kit designed for the M9010A, M9018B, and M9019A when used in a Keysight rack. It can be used with both the rack mount kit and the cable tray kit. The kit includes support rails and attachment hardware. An M9018B or M9019A that is racked using this rail kit and the cable tray uses 5U of rack space. This kit is not compatible with the Y1270A Front Panel Interfacing Kit.

• Allows the system designer to decide how best to cool the M9018B and M9019A PXIe chassis
• Provides more design flexibility than any other PXI chassis
• The Y1214B Air Inlet Kit replaces the Y1214A Air Inlet Kit – the Y1214A Air Inlet Kit is only compatible with M9018A chassis with serial numbers TW54340000 and before.

The Y1214B Air Inlet Kit can be used to supply additional cooling air from the front of the chassis so that this air is directed to other slots. These air inlet modules utilize the unique cooling design of the M9018B and M9019A PXIe chassis The kit is not supported in any other PXI chassis and may actually decrease cooling capacity in other PXI chassis. Requires some assembly.

• Allows the chassis to be rackmounted in 4U of space
• Can be used with optional cable tray and rail kits

The Y1215B is a complete rack-mounting kit for the M9018A PXIe chassis. It includes rack flanges, handles, and attachment hardware. It suspends the chassis in a Keysight rack using only 4U of rack space. Rack rails may be needed in a non-Keysight rack and are ordered separately. When rails are used, the chassis will require 5U of rack space.

• Allows the chassis to be rackmounted in 4U of space
• Recesses the chassis by 4 inches
• Can be used with optional cable tray and rail kits

The Y1216A is a complete rack-mounting kit for the M9018A PXIe chassis. It includes rack flanges, handles, and attachment hardware. It suspends the chassis in a Keysight Rack using only 4U of rack space. It also recesses the chassis by 4 inches. Rack rails may be needed in a non-Keysight rack and are ordered separately. When rails are used, the chassis will require 5U of rack space.