Modular Systems

• Eight-slot mainframe, choice of 21-plug-in modules 34980A Multifunction Switch / Measure Unit Summary
• Built-in DMM with 6½ digits (22 bits) of resolution
• Scan rates of up to 1000 channels/second
• Standard LAN, USB, and GPIB connectivity to PC, LXI compliant
• Easy remote access with built-in Web interface
• Priced up to 40% less than comparable module solutions in VXI or PXI
• Up to 560 2-wire mux or 4096 matrix cross-points in one mainframe

The Keysight 34980A is a flexible, reliable switching and data acquisition platform with more than 20 modules to help you customize your test system. Available at a price that is up to 40% less than comparable modular solutions in VXI or PXI.

• Learn more click on the view product demo link above to see the Switch/Measure 10-tips videos
• Choose which modules are right for you view 34980 modules in Options and Accessories
• Click here to learn how developing a Standardized Core Makes Building and Supporting a Functional Test System Easier and Less Costly

Keysight’s BenchVue DAQ Control and Analysis app is available for use with the DAQ970A, 34970A, 34972A and 34980A. BenchVue gives you an intuitive interface for test configuration and real-time data display and analysis. Setup and make measurements quickly, export data or log and view real-time measurements with a variety of display types to interpret your data faster. BenchVue Software also supports many other Keysight instruments giving you a single interface for Keysight’s most popular instruments.

For more information about Attenuator/Switch Driver, please visit Attenuator/Switch Drivers

• Ammeter accuracy: Up to 0.025% + 8 nA; up to 18 bits
• Arbitrary waveform generator function: Bandwidth up to 100 kHz, output power up to 500 W
• Data logger function: Measurement interval from 20 µs to 60 seconds, with a maximum of 500 M readings per second
• Scope function: Digitizes voltage and current up to 200 kHz, 512 kpts; up to 18 bits
• Voltmeter accuracy: Up to 0.025% + 50 µV; up to 18 bits

Save Test Time

The Keysight N6705C DC power analyzer gives you productivity gains for sourcing and measuring DC voltage and current into the device under test (DUT). The N6705C DC power analyzer has the capabilities of up to four advanced power supplies — a digital multimeter (DMM), scope, arb, and data logger.

The N6705C DC power analyzer eliminates the need to develop and debug programs to control a collection of instruments — all functions and measurements are located on the front panel. Get even greater control and analysis functions by incorporating Keysight PathWave BenchVue BV9200 control and analysis software.

The BV9200 PathWave BenchVue control and analysis software has an updated user interface, new advanced data analysis features, and automation capability. When automated bench setups are necessary, the N6705C is fully programmable over GPIB, USB, LAN, and is LXI compliant.

The N6705C DC power analyzer offers custom configurations to meet your power sourcing and analysis requirements. It has a four-slot mainframe that accepts up to four DC power modules and up to 600 W total DC output power (order modules separately).

Features

• Use for R&D sourcing to measure DC voltage and current into the DUT.
• Operate using dedicated physical controls for common functions.
• View complex data with a large color graphics display.
• Get flexible programming using GPIB, LAN, USB; LXI compliant.

Perform Precision Measurements On High-Speed Signals

The Keysight N1000A DCA-X wide-bandwidth oscilloscope provides accurate and precise measurements on high-speed digital designs from 50 Mb/s to 224 Gb/s. Configure the N1000A DCA-X mainframe by selecting from plug-in modules to match your desired bandwidth, filtering, and sensitivity.

• DCA-X platform consists of a mainframe and a wide variety of modules for flexible testing.
• The consistency and flexibility of the DCA-X series ensure high accuracy in any measurement.
  
• Supports today’s modules plus older, discontinued optical, electrical, and TDR modules to help protect your investment from obsolescence.

• Test bandwidth to > 110 GHz, jitter as low as 50 fs, and noise as low as 275 uV.
• Sample rates are up to 250 kSa/s and support up to 16 channels for high test throughput.
• Customize with plug-in modules for precision optical, electrical, and / or TDR / TDT / S-parameter analysis.

• 3-slot mainframe with USB and LAN
• 6 1/2-digit (22-bit) internal DMM, scanning up to 450 channels per second with new solid-state multiplexer module
• 9 switch and control plug-in modules to choose from
• 24-bit sampling rate of 800 kSa/s with a new DAQM909A 4 channel digitizer module
• Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance, frequency/period, diode test and capacitance
• 100k readings of non-volatile memory holds data when power is removed
• Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs

Get the next-generation data acquisition (DAQ) system with a 3-slot mainframe and your choice of 9 plug-in modules. Interface with the DAQ using Keysight BenchVue DAQ software, the intuitive graphical front panel with task oriented, self-guiding menus, or a web browser.

• Advanced 6½ digit internal DMM with improved accuracy and faster measurement speed
• Ability to measure very low current ranges (1 μA DC and 100 μA AC) and higher resistance range (1000 MΩ)
• New auto-calibration that compensates for internal drifts caused by time and temperature changes
• 3497XA compatible, program and configuration

PLUS

• All modules have been updated to have improved switching speeds and accuracies
• NEW DAQM900A solid state multiplexer with scan rate speed of up to 450 channels/sec
• NEW DAQM909A 24-bit digitizer module providing 4 channels, simultaneous sampling, differential inputs, and sample rates up to 800 kSa/s

Keysight’s BenchVue DAQ Control and Analysis app is available for use with the DAQ970A, DAQ973A, 34970A, 34972A and 34980A. BenchVue gives you an intuitive interface for test configuration and real-time data display and analysis. Setup and make measurements quickly, export data or log and view real-time measurements with a variety of display types to interpret your data faster. BenchVue Software also supports many other Keysight instruments giving you a single interface for Keysight’s most popular instruments.

• The mainframe contains two E4362A modules.

The E4368A is a preconfigured solar array simulator consisting of 1 E4360A mainframe and 2 E4362A modules. It is shipped as fully tested and assembled dual output solar array simulator. The Keysight E4362A is a 600W solar array simulator DC power module that simulates the output characteristics of a solar array. The E4361A is primarily a current source with very low output capacitance. It offers fast I-V curve changes allowing you to accurately simulate the output of different solar arrays under various environmental conditions (ex. temperature, age, eclipse, spin etc.).

Additionally, the E4360A SAS mainframe saves valuable rack space with its 2U high size. LAN, USB, and GPIB interfaces are standard. To simplify test system software development, the 14360A System Control Tool software package is shipped free with every E4360A SAS mainframe. This software simplifies the programming and control of multiple SASs. It allows a single function call to setup and control up to 100 E4360 outputs in a SAS system. Learn about all the new capabilities for Keysight 14360A System Control Tools Software.

The E4360 SAS is available as a standalone off-the-shelf instrument and is also available from Keysight integrated into a full turn key solar array simulator system configured to your exact specification with all the instruments and the software integrated and installed.

Overview of the E4360 Modular Solar Array Simulators.

Maximum total output power (= sum of total module output power)

• 400 W when operating from 100 - 240 VAC input

AC input

• Nominal Input Ratings: 100 VAC - 240 VAC; 50/60/400 Hz
• Input Range: 86 VAC - 264 VAC
• Power Consumption: 1000 VA typical
• Fuse Internal fuse (not customer accessible)

Protection response characteristics

• INH input: 5 µs from receipt of inhibit to start of shutdown
• Fault on coupled outputs: < 10 µs (from receipt of fault to start of shutdown)

The Keysight N6710C is a 400 W build-to-order system that is shipped as a fully tested and assembled multiple-output power supply. Each N6710C consists of 1 N6700C mainframe and from 1 to 4 DC power modules. Modules are ordered as options to the N6710C.

The N6700 Low-Profile Modular Power System offers small size with up to 4 outputs in 1U of rack space, and GPIB, LAN, USB, LXI compliance are standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 300 W.

• 3-slot mainframe with USB, LAN and GPIB interfaces
• 6 1/2-digit (22-bit) internal DMM, scanning up to 450 channels per second with new solid-state multiplexer module
• 9 switch and control plug-in modules to choose from
• 24-bit sampling rate of 800 kSa/s with a new DAQM909A 4 channel digitizer module
• Built-in signal conditioning measures thermocouples, RTDs and thermistors, AC/DC volts and current; resistance, frequency/period, diode test and capacitance
• 100k readings of non-volatile memory holds data when power is removed
• Hi/LO alarm limits on each channel, plus 4 TTL alarm outputs
• A BenchVue software license (BV0006B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences

Get the next-generation data acquisition (DAQ) system with a 3-slot mainframe and your choice of 9 plug-in modules. Interface with the DAQ using Keysight BenchVue DAQ software, the intuitive graphical front panel with task oriented, self-guiding menus, or a web browser.

• Advanced 6½ digit internal DMM with improved accuracy and faster measurement speed
• Ability to measure very low current ranges (1 μA DC and 100 μA AC) and higher resistance range (1000 MΩ)
• New auto-calibration that compensates for internal drifts caused by time and temperature changes
• 3497XA compatible, program and configuration

PLUS

• All modules have been updated to have improved switching speeds and accuracies
• NEW DAQM900A solid state multiplexer with scan rate speed of up to 450 channels/sec
• NEW DAQM909A 24-bit digitizer module providing 4 channels, simultaneous sampling, differential inputs, and sample rates up to 800 kSa/s

Keysight’s BenchVue DAQ Control and Analysis app is available for use with the DAQ970A, DAQ973A, 34970A, 34972A and 34980A. BenchVue gives you an intuitive interface for test configuration and real-time data display and analysis. Setup and make measurements quickly, export data or log and view real-time measurements with a variety of display types to interpret your data faster. BenchVue Software also supports many other Keysight instruments giving you a single interface for Keysight’s most popular instruments.

Maximum total output power (= sum of total module output power)

• 1200 W when operating from 200 - 240 VAC input
• 600 W when operating from 100 - 120 VAC input

AC input

• Nominal Input Ratings: 100 VAC - 240 VAC; 50/60/400 Hz
• Input Range: 86 VAC - 264 VAC
• Power Consumption: 3000 VA typical
• Fuse Internal fuse (not customer accessible)

Protection response characteristics

• INH input: 5 µs from receipt of inhibit to start of shutdown
• Fault on coupled outputs: < 10 µs (from receipt of fault to start of shutdown)

The Keysight N6712C is a 1200 W build-to-order system that is shipped as a fully tested and assembled multiple-output power supply. Each N6712C consists of 1 N6702C mainframe and from 1 to 4 DC power modules. Modules are ordered as options to the N6712C.

The N6700 Low-Profile Modular Power System offers small size with up to 4 outputs in 1U of rack space, and GPIB, LAN, USB, LXI compliance are standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 300 W.

Maximum total output power (= sum of total module output power)

• 600 W when operating from 100 - 240 VAC input

AC input

• Nominal Input Ratings: 100 VAC - 240 VAC; 50/60/400 Hz
• Input Range: 86 VAC - 264 VAC
• Power Consumption: 1500 VA typical
• Fuse Internal fuse (not customer accessible)

Protection response characteristics

• INH input: 5 µs from receipt of inhibit to start of shutdown
• Fault on coupled outputs: < 10 µs (from receipt of fault to start of shutdown)

The Keysight N6711C is a 600 W build-to-order system that is shipped as a fully tested and assembled multiple-output power supply. Each N6711C consists of 1 N6701C mainframe and from 1 to 4 DC power modules. Modules are ordered as options to the N6711C.

The N6700 Low-Profile Modular Power System offers small size with up to 4 outputs in 1U of rack space, and GPIB, LAN, USB, LXI compliance are standard. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 300 W.

• 6 Slots - full rack width mainframe
• 1800 Watts of total maximum power
• 6 Modules available for configuring (150W to 600W)
• Max voltage input: 240V (N3303A)
• Max current input: 120A (N3306A)

The Keysight N3300A is a full-rack width mainframe with 6-slots that accepts combinations of N330x user-installable load modules (150 W to 600 W) for easy system configuration and future reconfiguration. The N3300A holds up to six N3302A, N3303A, N3304A, N3307A load modules, or three N3305A, N3306A double-wide modules, allowing a total up to 1,800 watts of maximum power.

Testing multiple output dc power supplies and dc-dc converters can be very time consuming to test each output sequentially. If measurements are being made through a MUX using one DMM, this is what will happen. Use the built-in measurement capabilities of the N3300A electronic loads to measure all inputs simultaneously. Likewise, simultaneously test multiple single output power sources.

• 2 Slots - Half Rack Width Mainframe
• 600 Watts of Total Maximum Power
• 6 Modules available for configuring (150W to 600W)
• Max Voltage Input: 240V (N3303A)
• Max Current Input: 120A (N3306A)

The Keysight N3301A is a half-rack width mainframe with 2-slots that accepts combinations of N330x user-installable load modules (150 W to 600 W) for easy system configuration and future reconfiguration. The N3301A holds up to two N3302A, N3303A, N3304A, N3307A load modules, or one N3305A, N3306A double-wide modules, allowing a total up to 600 watts of maximum power.

Testing multiple output dc power supplies and dc-dc converters can be very time consuming to test each output sequentially. If measurements are being made through a MUX using one DMM, this is what will happen. Use the built-in measurement capabilities of the N3300A electronic loads to measure all inputs simultaneously. Likewise, simultaneously test multiple single output power sources.

Maximum Total Output Power (= Sum of Total Module Output Power)

• 400 W when operating from 100 - 240 VAC input

AC Input

• Nominal Input Ratings: 100 VAC - 240 VAC; 50/60/400 Hz
• Input Range: 86 VAC - 264 VAC
• Power Consumption: 1000 VA typical
• Fuse Internal fuse (not customer accessible)

Protection Response Characteristics

• INH input: 5 µs from receipt of inhibit to start of shutdown
• Fault on coupled outputs: < 10 µs (from receipt of fault to start of shutdown)

The Keysight N6700C is a 400 W 1U high, 4-slot modular power system mainframe that accepts from 1 to 4 N6700 series DC power modules in any combination. Modules are ordered separately. The N6700C offers GPIB, LAN, and USB, interfaces standard, and LXI compliance. Select from more than 30 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 500 W.

BenchVue software enabled: Do more with your PC and instrument together, no programming required. Easily control your power supplies to set parameters and quickly build automated tests on your PC.

Download BenchVue Basic app for free to control your instruments.