Modular Systems

Perform Precision Measurements On High-Speed Signals

The Keysight N1000A DCA-X wide-bandwidth oscilloscope provides accurate and precise measurements on high-speed digital designs from 50 Mb/s to 224 Gb/s. Configure the N1000A DCA-X mainframe by selecting from plug-in modules to match your desired bandwidth, filtering, and sensitivity.

• DCA-X platform consists of a mainframe and a wide variety of modules for flexible testing.
• The consistency and flexibility of the DCA-X series ensure high accuracy in any measurement.
  
• Supports today’s modules plus older, discontinued optical, electrical, and TDR modules to help protect your investment from obsolescence.

• Test bandwidth to > 110 GHz, jitter as low as 50 fs, and noise as low as 275 uV.
• Sample rates are up to 250 kSa/s and support up to 16 channels for high test throughput.
• Customize with plug-in modules for precision optical, electrical, and / or TDR / TDT / S-parameter analysis.
• 8X improvement in time interval accuracy
  
• Temperature controlled timebase improves tolerance to ambient changes
  

Maximum Total Output Power (= Sum of Total Module Output Power)

• 1200 W when operating from 200 - 240 VAC input
• 600 W when operating from 100 - 120 VAC input

AC Input

• Nominal Input Ratings: 100 VAC - 240 VAC; 50/60/400 Hz
• Input Range: 86 VAC - 264 VAC
• Maximum Input Power: 2000 VA, 2000 W

Protection Response Characteristics

• INH input: 5 µs from receipt of inhibit to start of shutdown
• Fault on coupled outputs: < 10 µs from receipt of fault to start of shutdown

The Keysight 1200W, E4360A Modular Solar Array Simulator is a 2U high, 2-slot mainframe that accepts up to 2 E4360 series modules. Modules are ordered separately. It offers LAN, USB, and GPIB interfaces standard.

The mainframe contains two E436x modules:

The E4366A is a build-to-order solar array simulator consisting of 1 E4360A mainframe and up to 2 E436xA modules. To specify which modules you want installed in the E4360A, modules are ordered as options to the E4366A. It is shipped as fully tested and assembled dual output solar array simulator.

The Keysight E436xA solar array simulator DC power modules simulate the output characteristics of a solar array. The E436xA is primarily a current source with very low output capacitance. It offers fast I-V curve changes allowing you to accurately simulate the output of different solar arrays under various environmental conditions (ex. temperature, age, eclipse, spin etc.).

Additionally, the E4360A SAS mainframe saves valuable rack space with its 2U high size. LAN, USB, and GPIB interfaces are standard. To simplify test system software development, the 14360A System Control Tool software package is shipped free with every E4360A SAS mainframe. This software simplifies the programming and control of multiple SASs. It allows a single function call to setup and control up to 100 E4360 outputs in a SAS system.

The E4360 SAS is available as a standalone off-the-shelf instrument and is also available from Keysight integrated into a full turn key solar array simulator system configured to your exact specification with all the instruments and the software integrated and installed.

The mainframe contains two E4361A modules:

The E4367A is a preconfigured solar array simulator consisting of one E4360A mainframe and two E4361A modules. It is shipped as fully tested and assembled dual output solar array simulator. The Keysight E4361A is a 510W solar array simulator DC power module that simulates the output characteristics of a solar array. The E4361A is primarily a current source with very low output capacitance. It offers fast I-V curve changes allowing you to accurately simulate the output of different solar arrays under various environmental conditions (ex. temperature, age, eclipse, spin etc.).

Additionally, the E4360A SAS mainframe saves valuable rack space with its 2U high size. LAN, USB, and GPIB interfaces are standard. To simplify test system software development, the 14360A System Control Tool software package is shipped free with every E4360A SAS mainframe. This software simplifies the programming and control of multiple SASs. It allows a single function call to setup and control up to 100 E4360 outputs in a SAS system.

The E4360 SAS is available as a standalone off-the-shelf instrument and is also available from Keysight integrated into a full turn key solar array simulator system configured to your exact specification with all the instruments and the software integrated and installed.

The mainframe contains two E4362A modules:

The E4368A is a preconfigured solar array simulator consisting of one E4360A mainframe and two E4362A modules. It is shipped as fully tested and assembled dual output solar array simulator. The Keysight E4362A is a 600W solar array simulator DC power module that simulates the output characteristics of a solar array. The E4361A is primarily a current source with very low output capacitance. It offers fast I-V curve changes allowing you to accurately simulate the output of different solar arrays under various environmental conditions (ex. temperature, age, eclipse, spin etc.).

Additionally, the E4360A SAS mainframe saves valuable rack space with its 2U high size. LAN, USB, and GPIB interfaces are standard. To simplify test system software development, the 14360A System Control Tool software package is shipped free with every E4360A SAS mainframe. This software simplifies the programming and control of multiple SASs. It allows a single function call to setup and control up to 100 E4360 outputs in a SAS system.

The E4360 SAS is available as a standalone off-the-shelf instrument and is also available from Keysight integrated into a full turn key solar array simulator system configured to your exact specification with all the instruments and the software integrated and installed.

Maximum total output power (= Sum of Total Module Output Power)

• 600 W when operating from 100 - 240 VAC input

AC input

• Nominal Input Ratings: 100 VAC - 240 VAC; 50/60/400 Hz
• Input Range: 86 VAC - 264 VAC
• Power Consumption: 1500 VA typical
• Fuse Internal fuse (not customer accessible)

Protection response characteristics

• INH input: 5 µs from receipt of inhibit to start of shutdown
• Fault on coupled outputs: < 10 µs (from receipt of fault to start of shutdown)

The Keysight N6701C is a 600 W 1U high, 4-slot modular power system mainframe that accepts from 1 to 4 N6700 series DC power modules in any combination. Modules are ordered separately. The N6701C offers GPIB, LAN, and USB, interfaces standard, and LXI compliance. Select from more than 30 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 500 W.

BenchVue software enabled: Do more with your PC and instrument together, no programming required. Easily control your power supplies to set parameters and quickly build automated tests on your PC.

Download BenchVue Basic app for free to control your instruments.

• Reduces space requirements and simplifies management with high port densities — 400/100/50/40/25/10/1GE/ 100M — in 11RU vertical rack space
• Enables resource aggregation across load modules by using high-speed backplane
• Offers multi-user environment that leverages a per-port user ownership model for all test module ports
• Reduces management overhead and simplified upgrades with integrated IxOSTM operating system for chassis and load modules
• Enables simple and quick field service with field-replaceable modular controller, fan, and power supply modules
• Manages chassis remotely through browser (on XGS12-HSL and XGS12-SDL models)
• Supports the K400 load module
• Supports the complete line of Novus load modules
• Supports Windows 10 and IxOS native modes

• Compact 3RU form factor supports a broad range of speeds — 400/100/50/40/25/10/1GE/100M
• Supports Keysight applications for performance, functional, conformance, and security testing
• Three chassis models:
  • XGS2-SD standard performance
  • XGS2-SDL standard performance
  • XGS2-HSL high performance
• Ultra-high performance 3RU chassis assembly with new high-speed backplane supports high-bandwidth requirements
• Hot-swappable load modules can be changed without disrupting chassis operation
• Redundant power supply to ensure uninterrupted testing
• Field serviceable with modular power supplies, chassis controller, fan assembly, and synchronization modules
• Supports the K400 load module
• Supports the complete line of Novus load modules
• Supports Windows 10 and IxOS Native modes

• Reduces space requirements and simplifies management with high port densities — 400/100/50/40/25/10/1GE/ 100M — in 11RU vertical rack space
• Enables resource aggregation across load modules by using high-speed backplane
• Offers multi-user environment that leverages a per-port user ownership model for all test module ports
• Reduces management overhead and simplified upgrades with integrated IxOSTM operating system for chassis and load modules
• Enables simple and quick field service with field-replaceable modular controller, fan, and power supply modules
• Manages chassis remotely through browser (on XGS12-HSL and XGS12-SDL models)
• Supports the K400 load module
• Supports the complete line of Novus load modules
• Supports Windows 10 and IxOS native modes

• Reduces space requirements and simplifies management with high port densities — 400/100/50/40/25/10/1GE/ 100M — in 11RU vertical rack space
• Enables resource aggregation across load modules by using high-speed backplane
• Offers multi-user environment that leverages a per-port user ownership model for all test module ports
• Reduces management overhead and simplified upgrades with integrated IxOSTM operating system for chassis and load modules
• Enables simple and quick field service with field-replaceable modular controller, fan, and power supply modules
• Manages chassis remotely through browser (on XGS12-HSL and XGS12-SDL models)
• Supports the K400 load module
• Supports the complete line of Novus load modules
• Supports Window 10 and IxOS native modes

• Compact 3RU form factor supports a broad range of speeds — 400/100/50/40/25/10/1GE/100M
• Supports Keysight applications for performance, functional, conformance, and security testing
• Three chassis models:
  • XGS2-SD standard performance
  • XGS2-SDL standard performance
  • XGS2-HSL high performance
• Ultra-high performance 3RU chassis assembly with new high-speed backplane supports high-bandwidth requirements
• Hot-swappable load modules can be changed without disrupting chassis operation
• Redundant power supply to ensure uninterrupted testing
• Field serviceable with modular power supplies, chassis controller, fan assembly, and synchronization modules
• Supports the K400 load module
• Supports the complete line of Novus load modules
• Supports Windows 10 and IxOS Native modes

• Compact 3RU form factor supports a broad range of speeds — 400/100/50/40/25/10/1GE/100M
• Supports Keysight applications for performance, functional, conformance, and security testing
• Three chassis models:
  • XGS2-SD standard performance
  • XGS2-SDL standard performance
  • XGS2-HSL high performance
• Ultra-high performance 3RU chassis assembly with new high-speed backplane supports high-bandwidth requirements
• Hot-swappable load modules can be changed without disrupting chassis operation
• Redundant power supply to ensure uninterrupted testing
• Field serviceable with modular power supplies, chassis controller, fan assembly, and synchronization modules
• Supports the K400 load module
• Supports the complete line of Novus load modules
• Supports Windows 10 and IxOS Native modes