Modular Systems

Perform Precision Measurements On High-Speed Signals

The Keysight N1000A DCA-X wide-bandwidth oscilloscope provides accurate and precise measurements on high-speed digital designs from 50 Mb/s to 224 Gb/s. Configure the N1000A DCA-X mainframe by selecting from plug-in modules to match your desired bandwidth, filtering, and sensitivity.

• DCA-X platform consists of a mainframe and a wide variety of modules for flexible testing.
• The consistency and flexibility of the DCA-X series ensure high accuracy in any measurement.
  
• Supports today’s modules plus older, discontinued optical, electrical, and TDR modules to help protect your investment from obsolescence.

• Test bandwidth to > 110 GHz, jitter as low as 50 fs, and noise as low as 275 uV.
• Sample rates are up to 250 kSa/s and support up to 16 channels for high test throughput.
• Customize with plug-in modules for precision optical, electrical, and / or TDR / TDT / S-parameter analysis.
• 8X improvement in time interval accuracy
  
• Temperature controlled timebase improves tolerance to ambient changes
  

Maximum Total Output Power (= Sum of Total Module Output Power)

• 1200 W when operating from 200 - 240 VAC input
• 600 W when operating from 100 - 120 VAC input

AC Input

• Nominal Input Ratings: 100 VAC - 240 VAC; 50/60/400 Hz
• Input Range: 86 VAC - 264 VAC
• Maximum Input Power: 2000 VA, 2000 W

Protection Response Characteristics

• INH input: 5 µs from receipt of inhibit to start of shutdown
• Fault on coupled outputs: < 10 µs from receipt of fault to start of shutdown

The Keysight 1200W, E4360A Modular Solar Array Simulator is a 2U high, 2-slot mainframe that accepts up to 2 E4360 series modules. Modules are ordered separately. It offers LAN, USB, and GPIB interfaces standard.

The mainframe contains two E436x modules:

The E4366A is a build-to-order solar array simulator consisting of 1 E4360A mainframe and up to 2 E436xA modules. To specify which modules you want installed in the E4360A, modules are ordered as options to the E4366A. It is shipped as fully tested and assembled dual output solar array simulator.

The Keysight E436xA solar array simulator DC power modules simulate the output characteristics of a solar array. The E436xA is primarily a current source with very low output capacitance. It offers fast I-V curve changes allowing you to accurately simulate the output of different solar arrays under various environmental conditions (ex. temperature, age, eclipse, spin etc.).

Additionally, the E4360A SAS mainframe saves valuable rack space with its 2U high size. LAN, USB, and GPIB interfaces are standard. To simplify test system software development, the 14360A System Control Tool software package is shipped free with every E4360A SAS mainframe. This software simplifies the programming and control of multiple SASs. It allows a single function call to setup and control up to 100 E4360 outputs in a SAS system.

The E4360 SAS is available as a standalone off-the-shelf instrument and is also available from Keysight integrated into a full turn key solar array simulator system configured to your exact specification with all the instruments and the software integrated and installed.

The mainframe contains two E4361A modules:

The E4367A is a preconfigured solar array simulator consisting of one E4360A mainframe and two E4361A modules. It is shipped as fully tested and assembled dual output solar array simulator. The Keysight E4361A is a 510W solar array simulator DC power module that simulates the output characteristics of a solar array. The E4361A is primarily a current source with very low output capacitance. It offers fast I-V curve changes allowing you to accurately simulate the output of different solar arrays under various environmental conditions (ex. temperature, age, eclipse, spin etc.).

Additionally, the E4360A SAS mainframe saves valuable rack space with its 2U high size. LAN, USB, and GPIB interfaces are standard. To simplify test system software development, the 14360A System Control Tool software package is shipped free with every E4360A SAS mainframe. This software simplifies the programming and control of multiple SASs. It allows a single function call to setup and control up to 100 E4360 outputs in a SAS system.

The E4360 SAS is available as a standalone off-the-shelf instrument and is also available from Keysight integrated into a full turn key solar array simulator system configured to your exact specification with all the instruments and the software integrated and installed.

The mainframe contains two E4362A modules:

The E4368A is a preconfigured solar array simulator consisting of one E4360A mainframe and two E4362A modules. It is shipped as fully tested and assembled dual output solar array simulator. The Keysight E4362A is a 600W solar array simulator DC power module that simulates the output characteristics of a solar array. The E4361A is primarily a current source with very low output capacitance. It offers fast I-V curve changes allowing you to accurately simulate the output of different solar arrays under various environmental conditions (ex. temperature, age, eclipse, spin etc.).

Additionally, the E4360A SAS mainframe saves valuable rack space with its 2U high size. LAN, USB, and GPIB interfaces are standard. To simplify test system software development, the 14360A System Control Tool software package is shipped free with every E4360A SAS mainframe. This software simplifies the programming and control of multiple SASs. It allows a single function call to setup and control up to 100 E4360 outputs in a SAS system.

The E4360 SAS is available as a standalone off-the-shelf instrument and is also available from Keysight integrated into a full turn key solar array simulator system configured to your exact specification with all the instruments and the software integrated and installed.

Maximum total output power (= Sum of Total Module Output Power)

• 600 W when operating from 100 - 240 VAC input

AC input

• Nominal Input Ratings: 100 VAC - 240 VAC; 50/60/400 Hz
• Input Range: 86 VAC - 264 VAC
• Power Consumption: 1500 VA typical
• Fuse Internal fuse (not customer accessible)

Protection response characteristics

• INH input: 5 µs from receipt of inhibit to start of shutdown
• Fault on coupled outputs: < 10 µs (from receipt of fault to start of shutdown)

The Keysight N6701C is a 600 W 1U high, 4-slot modular power system mainframe that accepts from 1 to 4 N6700 series DC power modules in any combination. Modules are ordered separately. The N6701C offers GPIB, LAN, and USB, interfaces standard, and LXI compliance. Select from more than 30 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 500 W.

BenchVue software enabled: Do more with your PC and instrument together, no programming required. Easily control your power supplies to set parameters and quickly build automated tests on your PC.

Download BenchVue Basic app for free to control your instruments.

• Eight-slot mainframe, choice of 21-plug-in modules 34980A Multifunction Switch / Measure Unit Summary
• Built-in DMM with 6½ digits (22 bits) of resolution
• Scan rates of up to 1000 channels/second
• Standard LAN, USB, and GPIB connectivity to PC, LXI compliant
• Easy remote access with built-in Web interface
• Priced up to 40% less than comparable module solutions in VXI or PXI
• Up to 560 2-wire mux or 4096 matrix cross-points in one mainframe

The Keysight 34980A is a flexible, reliable switching and data acquisition platform with more than 20 modules to help you customize your test system. Available at a price that is up to 40% less than comparable modular solutions in VXI or PXI.

• Learn more click on the view product demo link above to see the Switch/Measure 10-tips videos
• Choose which modules are right for you view 34980 modules in Options and Accessories
• Click here to learn how developing a Standardized Core Makes Building and Supporting a Functional Test System Easier and Less Costly

Keysight’s BenchVue DAQ Control and Analysis app is available for use with the DAQ970A, 34970A, 34972A and 34980A. BenchVue gives you an intuitive interface for test configuration and real-time data display and analysis. Setup and make measurements quickly, export data or log and view real-time measurements with a variety of display types to interpret your data faster. BenchVue Software also supports many other Keysight instruments giving you a single interface for Keysight’s most popular instruments.

For more information about Attenuator/Switch Driver, please visit Attenuator/Switch Drivers

Chassis

• 400 or 480 VAC 3-phase input power
• Holds up to eight BT2204B or BT2205A modules

Channel rating per module

• BT2204B 32 channels with 6 V, ±6.25 A, 27.34 W
• BT2205A 2 channels with 6 V, ±100 A, 437.5 W

Create unique sequences

• Combine charge, discharge, pre-charge, rest state, or a DC internal resistance (DCIR) measurement steps into a test sequence.

Monitor test conditions

• Monitor voltage, Current, Power, Amp*Hours, Watt*Hours, ΔV/Δt, ΔI/Δt, ΔV, ΔI during steps.

Safety and cell protection

• Probe-check assures good connections to your cells. Customize or use predefined limits to stop charge and discharging.

The BT2200 charge-discharge platform is cost-effective and easily configurable for Li-Ion cell formation and lifetime cell cycling. Modular configurations support cells requiring maximum currents ranging from ± 6 A to ± 800 A, with up to 256 cells or channels per chassis.

Chassis

• 208 or 200 VAC 3-phase input power
• Holds up to eight BT2204B or BT2205A modules

Channel rating per module

• BT2204B 32 channels with 6 V, ±6.25 A, 27.34 W
• BT2205A 2 channels with 6 V, ±100 A, 437.5 W

Create unique sequences

• Combine charge, discharge, pre-charge, rest state, or a DC internal resistance (DCIR) measurement steps into a test sequence.

Monitor test conditions

• Monitor voltage, Current, Power, Amp*Hours, Watt*Hours, ΔV/Δt, ΔI/Δt, ΔV, ΔI during steps.

Safety and cell protection

• Probe-check assures good connections to your cells. Customize or use predefined limits to stop charge and discharging.

The BT2200 charge-discharge platform is cost-effective and easily configurable for Li-Ion cell formation and lifetime cell cycling. Modular configurations support cells requiring maximum currents ranging from ± 6 A to ± 800 A, with up to 256 cells or channels per chassis.

• Ammeter accuracy: Up to 0.025% + 8 nA; up to 18 bits
• Arbitrary waveform generator function: Bandwidth up to 100 kHz, output power up to 500 W
• Data logger function: Measurement interval from 20 µs to 60 seconds, with a maximum of 50,000 readings per second
• Scope function: Digitizes voltage and current up to 200 kHz, 512 kpts; up to 18 bits
• Voltmeter accuracy: Up to 0.025% + 50 µV; up to 18 bits

Save Test Time

The Keysight N6705C DC power analyzer gives you productivity gains for sourcing and measuring DC voltage and current into the device under test (DUT). The N6705C DC power analyzer has the capabilities of up to four advanced power supplies — a digital multimeter (DMM), scope, arb, and data logger.

The N6705C DC power analyzer eliminates the need to develop and debug programs to control a collection of instruments — all functions and measurements are located on the front panel. Get even greater control and analysis functions by incorporating Keysight PathWave BenchVue BV9200 control and analysis software.

The BV9200 PathWave BenchVue control and analysis software has an updated user interface, new advanced data analysis features, and automation capability. When automated bench setups are necessary, the N6705C is fully programmable over GPIB, USB, LAN, and is LXI compliant.

The N6705C DC power analyzer offers custom configurations to meet your power sourcing and analysis requirements. It has a four-slot mainframe that accepts up to four DC power modules and up to 600 W total DC output power (order modules separately).

Features

• Use for R&D sourcing to measure DC voltage and current into the DUT.
• Operate using dedicated physical controls for common functions.
• View complex data with a large color graphics display.
• Get flexible programming using GPIB, LAN, USB; LXI compliant.

Download BenchVue Basic app for free to control your instruments.

Start Your Precision Measurement Quickly

Keysight PX1001A PXIe Precision I/V Measurement Solution Package offers flexibility and extensibility for precision current-voltage (IV) measurements. The PX1001A allows you to select the SMU models and its number of modules appropriately based on your application requirement.

• M9010A PXIe Chassis and M9038A High Performance Embedded Controller bundled
• Selectable PXIe SMU modules bundled such as M9601A, M9602A, M9603A, M9614A and M9615A

• Some standard cables bundled with the PXIe SMU module as well

The Keysight MP4300 Series Solar Array Simulators (SAS) is a family of 1 kW and 1.4 kW modular power systems in a 2U footprint. The 10 kW mainframes can accommodate up to six slots for SAS modules, achieving excellent power and channel density.

Furthermore, the MP4300 Series SAS can simulate solar panels in a spacecraft while offering the highest density, efficiency, and reliability — minimizing rack space and providing the best total cost of ownership. The platform features LAN / LXI, USB, and optional GPIB interfaces.

The MP4300 Series offers autoranging output for greater flexibility (with Keysight MP4361A, MP4351A, and MP4352A modules only).

The following key features will help you:

• Support up to 160 V, up to ± 20 A, and 1.4 kW per module.
  
• Enable solar array simulation.
• Operate in two-quadrant modes, such as solar array simulator and regenerative electronic load.
• Provide fast IV curve change and fast recovery time.
• Achieve rapid deployment and debugging of new test systems with the help of an intuitive five-inch touchscreen interface.