Choose a country or area to see content specific to your location
What are you looking for?
-
-
3D Interconnect Designer
3D Interconnect Designer provides a flexible modeling and optimization environment for any advanced interconnect structure, including chiplets, stacked die, packages, and PCBs.
-
Save up to 50% on an XR8 Oscilloscope
Get faster digital validation for less with a trade-in.
-
Discover Keysight AI Data Center Builder
Emulate every part of your data center infrastructure. Emulate Anything. Optimize Everything.
-
Accelerate Signal Analysis with X-Series Measurement Applications
Use 25+ X-Series applications to analyze, demodulate, and troubleshoot signals across wireless, aerospace/defense, EMI, and phase noise.
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Precision In-Circuit Testing for Production
Achieve fast, accurate board-level testing with robust inline and offline ICT designed for modern manufacturing.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
448 Gb/s Waveform Generation
Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.
-
Stream 120 MHz I/Q Data to Your Laptop in the FieldPinpoint interference with post-processing spectrum management software in the lab.
Find the Right ATE Power SolutionUse this selector tool to quickly identify the best power supply for your aerospace and defense ATE requirements.
-
- Solutions
-
Explore engineer-authored content and a vast knowledge base with thousands of learning opportunities.
FeaturedKeysight Learn offers immersive content on topics of interest, including solutions, blogs, events, and more.
- Buy
-
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 12 of 263
-
6
-
150
No Filter available
Preamplifier, 10 MHz to 4 GHz
87405B preamplifier, 10 MHz to 4 GHz; compact gain block delivering reliable output power directly at the test port.
87405B preamplifier, 10 MHz to 4 GHz; compact gain block delivering reliable output power directly at the test port.
Preamplifier, 10 MHz to 4 GHz
87405B
87405B preamplifier, 10 MHz to 4 GHz; compact gain block delivering reliable output power directly at the test port.
Superior RF Performance
- 22 dB gain
- 8 dBm output power
- 5 dB noise figure
Bias Option
- DC Bias Volt/Amp: +15 V at 80 mA
- Compact size, integral bias regulation
Preamplifiers and System Noise Figure Application Note – This note discusses noise figure basics including applications and characteristics of Keysight’s amplifier technology. Highlighted are Keysight’s 87405C portable preamplifiers that provide an exceptional gain of 25 dB up to 18 GHz and a probe-power bias connection which eliminates the need for an additional DC power supply. Read the Preamplifiers and System Noise Figure Application Note now!
The Keysight 87405B microwave component amplifier brings compact, reliable gain block performance to systems integrators and microwave designers. With 22 dB minimum gain block and over 8 dBm output power, this amplifier offers output power where it is needed: at the test port.
For more information about usb preamp, microwave amplifier and system amplifier, please visit Keysight Amplifiers.
Microwave System Amplifier, 2 GHz to 8 GHz
87415A microwave system amplifier, 2 to 8 GHz; compact gain block delivering reliable output power at the test port.
87415A microwave system amplifier, 2 to 8 GHz; compact gain block delivering reliable output power at the test port.
Microwave System Amplifier, 2 GHz to 8 GHz
87415A
87415A microwave system amplifier, 2 to 8 GHz; compact gain block delivering reliable output power at the test port.
Superior RF performance
- Gain of more than 25dB
- P1dB of more than 23dBm
- Noise figure of less than 13dB (typ)
Connectors Type
- Rf connectors: 2.4mm(f)
Bias Option
- +12V@900mA
- Works with 87421A 25W Power Supply
The Keysight 87415A microwave component amplifier brings compact, reliable gain block performance to systems integrators and microwave designers. With 25 dB minimum gain and over 23 dBm output power from 2 to 8 GHz, this amplifier offers output power where it is needed: at the test port.
110 GHz Frequency Extender
N5293AX01 frequency extender expands PNA/PNA-X coverage to 110 GHz in a compact, lightweight module.
N5293AX01 frequency extender expands PNA/PNA-X coverage to 110 GHz in a compact, lightweight module.
110 GHz Frequency Extender
N5293AX01
N5293AX01 frequency extender expands PNA/PNA-X coverage to 110 GHz in a compact, lightweight module.
- Wide frequency range from 10 MHz to 110 GHz (no bias tee)
- Built-in 1.2 m interface cable for connection to N5292A controller
- Typical maximum power of 0 dBm from 90 GHz to 110 GHz
- Typical sweep range from -60 dBm to the maximum power
- Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz
Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.
The N5293AX01 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.
The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 10 MHz to 110 GHz.
For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.
120 GHz Frequency Extender
N5295AX53 120 GHz Frequency Extender extends the frequency coverage of a base PNA/PNA-X with this compact, lightweight module.
N5295AX53 120 GHz Frequency Extender extends the frequency coverage of a base PNA/PNA-X with this compact, lightweight module.
120 GHz Frequency Extender
N5295AX53
N5295AX53 120 GHz Frequency Extender extends the frequency coverage of a base PNA/PNA-X with this compact, lightweight module.
- Wide frequency range from 900 Hz to 120 GHz, with PNA/PNA-X’s low frequency extension (LFE) option
- Built-in bias tee
- Built-in 1.8 m interface cable for connection to N5292A controller
- Typical maximum power of +8 dBm to 60 GHz, +5 dBm to 110 GHz, +4 dBm to 120 GHz
- Typical sweep range from -60 dBm to the maximum power
- Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz, -100 dBm to 120 GHz
- Typical performance to 125 GHz, operational over-range frequency 130 GHz
Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.
The N5295AX53 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.
The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 900 Hz to 120 GHz.
For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.
Microwave System Amplifier, 10 MHz to 26.5 GHz
83006A microwave system amplifier, 10 MHz to 26.5 GHz; recovers RF losses and boosts test port power in ATE systems.
83006A microwave system amplifier, 10 MHz to 26.5 GHz; recovers RF losses and boosts test port power in ATE systems.
Microwave System Amplifier, 10 MHz to 26.5 GHz
83006A
83006A microwave system amplifier, 10 MHz to 26.5 GHz; recovers RF losses and boosts test port power in ATE systems.
Superior RF performance
- Gain of more than 20dB
- P1dB of more than 13dBm to 20GHz
- Noise figure of less than 13dB to 0.1GHz, 8dB to 18GHz, 13dB to 26.5GHz (typ)
Connectors Type
- Rf connectors: 3.5mm(f)
Bias Option
- +12V@450mA, -12V@50mA
- Works with 87421A 25 W Power Supply
- Works with 87422A 70 W Power Supply
The Keysight 83006A microwave system amplifier is a compact, off-the-shelf amplifier designed for systems designers and integrators. This amplifier provides power where you need it to recover system losses and to boost available power in RF and microwave ATE systems. The ultrabroad bandwidth from 10 MHz to 26.5 GHz allows the designer to replace several narrow bandwidth amplifiers with a single Keysight amplifier, eliminating the need for crossover networks or multiple bias supplies.
For more information about USB preamplifiers, microwave amplifiers and system amplifiers, please visit Keysight Amplifiers.
110 GHz Frequency Extender
N5293AX51 110 GHz Frequency Extender extends the frequency coverage (10 MHz to 110 GHz) of a base PNA/PNA-X with this compact, lightweight module. No bias tee.
N5293AX51 110 GHz Frequency Extender extends the frequency coverage (10 MHz to 110 GHz) of a base PNA/PNA-X with this compact, lightweight module. No bias tee.
110 GHz Frequency Extender
N5293AX51
N5293AX51 110 GHz Frequency Extender extends the frequency coverage (10 MHz to 110 GHz) of a base PNA/PNA-X with this compact, lightweight module. No bias tee.
- Wide frequency range from 10 MHz to 110 GHz (No bias tee)
- Built-in 1.8 m interface cable for connection to N5292A controller
- Typical maximum power of 0 dBm from 90 GHz to 110 GHz
- Typical sweep range from -60 dBm to the maximum power
- Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz
Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.
The N5293AX51 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.
The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 10 MHz to 110 GHz.
For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.
4-in-1 OSLT Mechanical Calibration Kit, DC to 18 GHz, Type-N (m) 50 ohm
85518A 4-in-1 OSLT mechanical calibration kit, DC to 18 GHz, Type-N male (m) 50 ohm for non-insertable devices.
85518A 4-in-1 OSLT mechanical calibration kit, DC to 18 GHz, Type-N male (m) 50 ohm for non-insertable devices.
4-in-1 OSLT Mechanical Calibration Kit, DC to 18 GHz, Type-N (m) 50 ohm
85518A
85518A 4-in-1 OSLT mechanical calibration kit, DC to 18 GHz, Type-N male (m) 50 ohm for non-insertable devices.
- Type-N (m), 50 ohm, open, short, load, and through
- DC to 18 GHz
- Open phase error: 0 to 6 GHz ≤ 2.0°, 6 to 9 GHz ≤ 3.0°, 9 to 18 GHz ≤ 4.0°
- Short phase error: 0 to 6 GHz ≤ 1.5°, 6 to 9 GHz ≤ 2.5°,9 to 18 GHz ≤ 3.0°
- Load return loss: 0 to 6 GHz ≥ 42 dB, 6 to 9 GHz, ≥ 35 dB, 9 to 18 GHz, ≥ 32 dB
- Dimensions: H x W x D ~ 106 x 72 x 22 mm
The 85518A 4-in-1 mechanical calibration module combines an open, short, load, and through in a compact unit. The product is small, easy to handle, and light weight. The through allows users to easily calibrate non-insertable devices, such as a cable or filter with male-male connectors. During the "thru" part of the calibration, the 85518A through can be used.
For more information about calibration kits, please visit Mechanical and Electronic Calibration Kits.
4-In-1 OSLT Mechanical Calibration Kit, DC To 18 GHz, Type-N (f) 50 ohm
85519A 4-in-1 OSLT mechanical calibration kit, DC to 18 GHz, Type-N female (f) 50 ohm for non-insertable devices.
85519A 4-in-1 OSLT mechanical calibration kit, DC to 18 GHz, Type-N female (f) 50 ohm for non-insertable devices.
4-In-1 OSLT Mechanical Calibration Kit, DC To 18 GHz, Type-N (f) 50 ohm
85519A
85519A 4-in-1 OSLT mechanical calibration kit, DC to 18 GHz, Type-N female (f) 50 ohm for non-insertable devices.
- Type-N (f), 50 ohm, open, short, load, and through
- DC to 18 GHz
- Open phase error: 0 to 6 GHz ≤ 2.0°, 6 to 9 GHz ≤ 3.0°, 9 to 18 GHz ≤ 4.0°
- Short phase error: 0 to 6 GHz ≤ 1.5°, 6 to 9 GHz ≤ 2.5°,9 to 18 GHz ≤ 3.0°
- Load return loss: 0 to 6 GHz ≥ 42 dB, 6 to 9 GHz, ≥ 35 dB, 9 to 18 GHz, ≥ 32 dB
- Dimensions: H x W x D ~ 121 x 89 x 22 mm
The 85519A 4-in-1 mechanical calibration module combines an open, short, load, and through in a compact unit. The product is small, easy to handle, and light weight. The through allows users to easily calibrate non-insertable devices, such as a cable or filter with female-female connectors. During the "thru" part of the calibration, the 85519A through can be used.
For more information about calibration kits, please visit Mechanical and Electronic Calibration Kits.
110 GHz Frequency Extender
N5293AX53 frequency extender expands PNA/PNA-X coverage to 110 GHz in a compact, lightweight module.
N5293AX53 frequency extender expands PNA/PNA-X coverage to 110 GHz in a compact, lightweight module.
110 GHz Frequency Extender
N5293AX53
N5293AX53 frequency extender expands PNA/PNA-X coverage to 110 GHz in a compact, lightweight module.
- Wide frequency range from 900 Hz to 110 GHz, with PNA/PNA-X’s low frequency extension (LFE) option.
- Built-in bias tee.
- Built-in 1.8 m interface cable for connection to N5292A controller.
- Typical maximum power of 0 dBm from 90 GHz to 110 GHz.
- Typical sweep range from -60 dBm to the maximum power.
- Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz.
Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.
The N5293AX53 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.
The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 900 Hz to 110 GHz.
For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.
120 GHz Frequency Extender
N5295AX01 Frequency Extender extends the frequency coverage with wide frequency range from 10 MHz to 120 GHz (no bias tee) for use with PNA/PNA-X based solutions.
N5295AX01 Frequency Extender extends the frequency coverage with wide frequency range from 10 MHz to 120 GHz (no bias tee) for use with PNA/PNA-X based solutions.
120 GHz Frequency Extender
N5295AX01
N5295AX01 Frequency Extender extends the frequency coverage with wide frequency range from 10 MHz to 120 GHz (no bias tee) for use with PNA/PNA-X based solutions.
- Wide frequency range from 10 MHz to 120 GHz (no bias tee).
- Built-in 1.2 m interface cable for connection to N5292A controller.
- Typical maximum power of +8 dBm to 60 GHz, +5 dBm to 110 GHz, +4 dBm to 120 GHz.
- Typical sweep range from -60 dBm to the maximum power.
- Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz, -100 dBm to 120 GHz.
- Typical performance to 125 GHz, operational over-range frequency 130 GHz.
Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.
The N5295AX01 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.
The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 10 MHz to 120 GHz.
For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.
DC Block, 50 kHz To 26.5 GHz
N9398C DC Block passes AC signals from 50 kHz to 26.5 GHz while blocking DC voltage and current components.
N9398C DC Block passes AC signals from 50 kHz to 26.5 GHz while blocking DC voltage and current components.
DC Block, 50 kHz To 26.5 GHz
N9398C
N9398C DC Block passes AC signals from 50 kHz to 26.5 GHz while blocking DC voltage and current components.
The Keysight N9398C DC block offers a new level of DC blocking with performance specified from 50 kHz to 26.5 GHz. This DC block features a broad frequency range, excellent return loss, very low insertion loss and excellent temperature stability.
- Frequency range 50 kHz to 26.5 GHz
- Low insertion loss < 0.9 dB
- 16 V maximum DC working voltage
- 3.5 mm precision coaxial connectors
Learn more about Keysight DC Blocks
DC Block, 700 kHz to 26.5 GHz
N9399C DC Block passes AC signals from 700 kHz to 26.5 GHz while blocking DC voltage and current components.
N9399C DC Block passes AC signals from 700 kHz to 26.5 GHz while blocking DC voltage and current components.
DC Block, 700 kHz to 26.5 GHz
N9399C
N9399C DC Block passes AC signals from 700 kHz to 26.5 GHz while blocking DC voltage and current components.
The Keysight N9399C DC block offers a new level of DC blocking with performance specified from 700 kHz to 26.5 GHz. This DC block features a broad frequency range, excellent return loss, very low insertion loss and excellent temperature stability.
- Frequency range 700 kHz to 26.5 GHz
- Low insertion loss < 1.2 dB
- 50 V maximum DC working voltage
- 3.5 mm precision coaxial connectors
Learn more about Keysight DC Blocks
