Choose a country or area to see content specific to your location
What are you looking for?
-
-
WirelessPro 3GPP AI Simulation Platform
WirelessPro empowers you to model, simulate, and analyze various aspects of 5G networks, 5G Advanced technologies, and future 6G wireless channels with unparalleled ease and accuracy.
-
Digital Validation. Faster.
Get faster, clearer insights with our new multicore, 12-bit oscilloscope up to 33 GHz.
-
Discover Keysight AI Data Center Builder
Emulate every part of your data center infrastructure. Emulate Anything. Optimize Everything.
-
Simplify Complexity with Advanced Signal Analyzer Software
Accelerate signal analysis testing with Keysight’s VSA software. Visualize, demodulate, and troubleshoot with over 75+ signal standards with precision.
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Precision In-Circuit Testing for Production
Achieve fast, accurate board-level testing with robust inline and offline ICT designed for modern manufacturing.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
-
Stream 120 MHz I/Q Data to Your Laptop in the FieldPinpoint interference with post-processing spectrum management software in the lab.
Now You Can Run Fast, Accurate Tests up to 192 kWOur high-density ATE power supplies end trade-offs between test throughput and precision.
-
- Solutions
-
Explore engineer-authored content and a vast knowledge base with thousands of learning opportunities.
FeaturedKeysight Learn offers immersive content on topics of interest, including solutions, blogs, events, and more.
-
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 12 of 265
No Filter available
No Filter available
120 GHz Frequency Extender
N5295AX53 120 GHz Frequency Extender extends the frequency coverage of a base PNA/PNA-X with this compact, lightweight module.
N5295AX53 120 GHz Frequency Extender extends the frequency coverage of a base PNA/PNA-X with this compact, lightweight module.
120 GHz Frequency Extender
N5295AX53
N5295AX53 120 GHz Frequency Extender extends the frequency coverage of a base PNA/PNA-X with this compact, lightweight module.
- Wide frequency range from 900 Hz to 120 GHz, with PNA/PNA-X’s low frequency extension (LFE) option
- Built-in bias tee
- Built-in 1.8 m interface cable for connection to N5292A controller
- Typical maximum power of +8 dBm to 60 GHz, +5 dBm to 110 GHz, +4 dBm to 120 GHz
- Typical sweep range from -60 dBm to the maximum power
- Typical noise floor of -120 dBm to 26.5 GHz, -110 dBm to 110 GHz, -100 dBm to 120 GHz
- Typical performance to 125 GHz, operational over-range frequency 130 GHz
Broadband frequency extension module designed for use with Keysight’s new PNA/PNA-X based millimeter wave solutions.
The N5295AX53 modules are compact lightweight modules designed to interface to the N5292A test set controller that is driven with a PNA/PNA-X B model vector network analyzer.
The modules allow users to extend the frequency coverage of a base PNA/PNA-X to cover a frequency range of 900 Hz to 120 GHz.
For more information about cable and accessories for use with network analyzers, please visit Network Analyzer Accessories.
Waveguide Power Sensor
Designed with a WR-12 flange connector, the E8486A makes precise and direct waveguide measurements in the E-band frequency range and is compatible with most Keysight power meters.
Designed with a WR-12 flange connector, the E8486A makes precise and direct waveguide measurements in the E-band frequency range and is compatible with most Keysight power meters.
Waveguide Power Sensor
E8486A
Designed with a WR-12 flange connector, the E8486A makes precise and direct waveguide measurements in the E-band frequency range and is compatible with most Keysight power meters.
- Frequency range 60 to 90 GHz
- Accurate average power measurements over -30 to +20 dBm
- Excellent SWR for reducing mismatch uncertainty
- Diode power sensing element
- 50 MHz calibration port
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration
- Compatible with EPM (N1913/14B), EPM-P (E4416/17A) and P-Series (N1911/12A) power meters, plus the discontinued N1913/14A and E4418/19B power meters
Note: The E8486A option 200/201 is not compatible with EPM E4418/19B power meters.
50 MHz to 40 GHz USB Peak Power Sensor
Keysight U2020 X-series USB peak power sensors provide the peak and CW power measurement capability of a power meter in a compact and portable form factor.
Keysight U2020 X-series USB peak power sensors provide the peak and CW power measurement capability of a power meter in a compact and portable form factor.
50 MHz to 40 GHz USB Peak Power Sensor
U2022XA
Keysight U2020 X-series USB peak power sensors provide the peak and CW power measurement capability of a power meter in a compact and portable form factor.
- Frequency range of 50 MHz to 40 GHz
- Wide dynamic range of -30 to +20 dBm (peak/gated), -45 to +20 dBm (average only mode)
- 30 MHz video bandwidth and single-shot real-time capture at 80 Msamples per second
- Internal zeroing & calibration
- High measurement speed of up to 25,000 readings/second (free run/fast buffer mode)
- Your instrument can be controlled at no additional cost using the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). This app simplifies instrument connection and control. Download the BenchVue Basic Power Meter/Sensor App (BV0007B). Note that the basic version does not include KeysightCare support and is one revision behind the licensed version. For access to the latest features and support, the licensed (paid) version of the BenchVue Power Meter/Sensor Control and Analysis App is available.
Built in external trigger in and out
An external trigger will enable accurate triggering of small signals close to the signal noise floor. With the built-in trigger in/out connection on the Keysight U2020 X-series USB peak power sensors, you can connect an external trigger signal from a signal source or the device under test directly to the USB sensor through a standard BNC to SMB cable.
50 MHz to 18 GHz USB Peak Power Sensor
Keysight U2020 X-series USB peak power sensors provide the peak and CW power measurement capability of a power meter in a compact and portable form factor.
Keysight U2020 X-series USB peak power sensors provide the peak and CW power measurement capability of a power meter in a compact and portable form factor.
50 MHz to 18 GHz USB Peak Power Sensor
U2021XA
Keysight U2020 X-series USB peak power sensors provide the peak and CW power measurement capability of a power meter in a compact and portable form factor.
- Frequency range of 50 MHz to 18 GHz
- Wide dynamic range of -30 to +20 dBm (peak/gated), -45 to +20 dBm (average only mode)
- 30 MHz video bandwidth and single-shot real-time capture at 80 Msamples per second
- Internal zeroing & calibration
- High measurement speed of up to 25,000 readings/second (free run/fast buffer mode)
- Your instrument can be controlled at no additional cost using the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). This app simplifies instrument connection and control. Download the BenchVue Basic Power Meter/Sensor App (BV0007B). Note that the basic version does not include KeysightCare support and is one revision behind the licensed version. For access to the latest features and support, the licensed (paid) version of the BenchVue Power Meter/Sensor Control and Analysis App is available.
Built in external trigger in and out
An external trigger will enable accurate triggering of small signals close to the signal noise floor. With the built-in trigger in/out connection on the Keysight U2020 X-series USB peak power sensors, you can connect an external trigger signal from a signal source or the device under test directly to the USB sensor through a standard BNC to SMB cable.
10 MHz To 33 GHz LAN Peak And Average Power Sensor
Make accurate measurement for any modulated signal with the Keysight Technologies, Inc. U2040 X-Series power sensors.
Make accurate measurement for any modulated signal with the Keysight Technologies, Inc. U2040 X-Series power sensors.
10 MHz To 33 GHz LAN Peak And Average Power Sensor
U2049XA
Make accurate measurement for any modulated signal with the Keysight Technologies, Inc. U2040 X-Series power sensors.
- Frequency range of 10 MHz to 33 GHz
- Wide dynamic range of -70 to +20 dBm for small signal measurements
- 5 MHz video bandwidth for peak power measurement
- LAN/ Power-Over-Ethernet (PoE) connectivity for long-distance remote monitoring (up to 100 meters)
- TVAC compliant for operation in a vacuum (Option TVA)
- Internal zero and automatic calibration save time and reduce measurement uncertainty
- Your instrument can be controlled at no additional cost using the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). This app simplifies instrument connection and control. Download the BenchVue Basic Power Meter/Sensor App (BV0007B). Note that the basic version does not include KeysightCare support and is one revision behind the licensed version. For access to the latest features and support, the licensed (paid) version of the BenchVue Power Meter/Sensor Control and Analysis App is available.
DC/10 MHz – 18 GHz USB Thermocouple Power Sensor
The U8480 series is the fastest USB thermocouple sensor in the world without compromising the best in class linearity of the legacy 8480/N8480 series thermocouple sensors, all in a compact USB based form factor.
The U8480 series is the fastest USB thermocouple sensor in the world without compromising the best in class linearity of the legacy 8480/N8480 series thermocouple sensors, all in a compact USB based form factor.
DC/10 MHz – 18 GHz USB Thermocouple Power Sensor
U8481A
The U8480 series is the fastest USB thermocouple sensor in the world without compromising the best in class linearity of the legacy 8480/N8480 series thermocouple sensors, all in a compact USB based form factor.
- Frequency range of DC/10 MHz to 18 GHz
- Wide dynamic range from -35 to +20 dBm
- Fastest measurement speed for thermocouple sensor, > 900 readings per second (free run/fast buffer mode)
- Power linearity of less than 0.8%
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST) or the National Physical Laboratory (NPL)
- Real-time measurement uncertainty (MU) feature and S-parameter, and gamma correction function
- Compatible with other Keysight instruments and EPM power meters (N1913B/14B and N1913A/14A)
- Your instrument can be controlled at no additional cost using the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). This app simplifies instrument connection and control. Download the BenchVue Basic Power Meter/Sensor App (BV0007B). Note that the basic version does not include KeysightCare support and is one revision behind the licensed version. For access to the latest features and support, the licensed (paid) version of the BenchVue Power Meter/Sensor Control and Analysis App is available
Perform measurements down to the DC range
The U8480 Series is Keysight’s first power sensor with the capability to measure down to DC. This feature is especially useful for signal source/network analyzer calibration, power references, and EMC applications.
Built-in external trigger input
An external trigger enables precise triggering of small signals close to the noise floor. With the U8480 Series power sensors, you can connect an external trigger signal from a signal source or device under test directly to the USB sensor using a standard BNC-to-SMB cable.
DC/10 MHz – 50 GHz USB Thermocouple Power Sensor
The U8480 series is the fastest USB thermocouple power sensor in the world without compromising the best in class linearity of the legacy 8480/N8480 series thermocouple sensors, all in a compact USB based form factor.
The U8480 series is the fastest USB thermocouple power sensor in the world without compromising the best in class linearity of the legacy 8480/N8480 series thermocouple sensors, all in a compact USB based form factor.
DC/10 MHz – 50 GHz USB Thermocouple Power Sensor
U8487A
The U8480 series is the fastest USB thermocouple power sensor in the world without compromising the best in class linearity of the legacy 8480/N8480 series thermocouple sensors, all in a compact USB based form factor.
- Frequency range of DC/10 MHz to 50 GHz
- Wide dynamic range from -35 to +20 dBm
- Fastest measurement speed for thermocouple sensor, > 900 readings per second (free run/fast buffer mode)
- Power linearity of less than 0.8%
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST) or the National Physical Laboratory (NPL)
- Real-time measurement uncertainty (MU) feature and S-parameter, and gamma correction function
- Compatible with other Keysight instruments and EPM power meters (N1913B/14B and N1913A/14A)
- Your instrument can be controlled at no additional cost using the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). This app simplifies instrument connection and control. Download the BenchVue Basic Power Meter/Sensor App (BV0007B). Note that the basic version does not include KeysightCare support and is one revision behind the licensed version. For access to the latest features and support, the licensed (paid) version of the BenchVue Power Meter/Sensor Control and Analysis App is available
Perform measurements down to the DC range
The U8480 Series is Keysight’s first power sensor with the capability to measure down to DC. This feature is especially useful for signal source/network analyzer calibration, power references, and EMC applications.
Built-in external trigger input
An external trigger enables precise triggering of small signals close to the noise floor. With the U8480 Series power sensors, you can connect an external trigger signal from a signal source or device under test directly to the USB sensor using a standard BNC-to-SMB cable.
10 MHz – 6 GHz USB Power Sensor
U2001A USB power sensor enable fast, simple setup by providing plug–and–play USB connectivity and by eliminating the need for a separate power meter.
U2001A USB power sensor enable fast, simple setup by providing plug–and–play USB connectivity and by eliminating the need for a separate power meter.
10 MHz – 6 GHz USB Power Sensor
U2001A
U2001A USB power sensor enable fast, simple setup by providing plug–and–play USB connectivity and by eliminating the need for a separate power meter.
- Frequency range of 10 MHz to 6 GHz
- Extended frequency of 3 MHz to 6 GHz (Option H03)
- Wide dynamic range of -60 to +25 dBm sensor (Option dependent)
- Internal zeroing capability to eliminate external calibration
- High measurement speed of up to 250 readings/second
- Support internal/external trigger measurements, internal triggering, and trace display
- Compatible with other Keysight instruments
- Your instrument can be controlled at no additional cost using the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). This app simplifies instrument connection and control. Download the BenchVue Basic Power Meter/Sensor App (BV0007B). Note that the basic version does not include KeysightCare support and is one revision behind the licensed version. For access to the latest features and support, the licensed (paid) version of the BenchVue Power Meter/Sensor Control and Analysis App is available.
Internal Triggering and Trace Display Capability
Internal triggering allows triggering based on the burst signal envelope, eliminating the need for an external signal. The trace display provides a graphical view of the signal envelope to assist with gate placement and trigger level setup. All U2000 power sensors, except for the U2004A, feature these capabilities.
DC/10 MHz – 67 GHz USB Thermocouple Power Sensor
The U8480 series is the fastest USB thermocouple sensor in the world without compromising the best in class linearity of the legacy 8480/N8480 series thermocouple sensors, all in a compact USB based form factor.
The U8480 series is the fastest USB thermocouple sensor in the world without compromising the best in class linearity of the legacy 8480/N8480 series thermocouple sensors, all in a compact USB based form factor.
DC/10 MHz – 67 GHz USB Thermocouple Power Sensor
U8488A
The U8480 series is the fastest USB thermocouple sensor in the world without compromising the best in class linearity of the legacy 8480/N8480 series thermocouple sensors, all in a compact USB based form factor.
- Frequency range of DC/10 MHz to 67 GHz
- Wide dynamic range from -35 to +20 dBm
- Fastest measurement speed for thermocouple sensor, > 900 readings per second (free run/fast buffer mode)
- Power linearity of less than 0.8%
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST) or the National Physical Laboratory (NPL)
- Real-time measurement uncertainty (MU) feature and S-parameter, and gamma correction function
- Compatible with other Keysight instruments and EPM power meters (N1913B/14B and N1913A/14A)
- Your instrument can be controlled at no additional cost using the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). This app simplifies instrument connection and control. Download the BenchVue Basic Power Meter/Sensor App (BV0007B). Note that the basic version does not include KeysightCare support and is one revision behind the licensed version. For access to the latest features and support, the licensed (paid) version of the BenchVue Power Meter/Sensor Control and Analysis App is available
Perform measurements down to the DC range
The U8480 Series is Keysight’s first power sensor with the capability to measure down to DC. This feature is especially useful for signal source/network analyzer calibration, power references, and EMC applications.
Built-in external trigger input
An external trigger enables precise triggering of small signals close to the noise floor. With the U8480 Series power sensors, you can connect an external trigger signal from a signal source or device under test directly to the USB sensor using a standard BNC-to-SMB cable.
10 MHz – 18 GHz USB Power Sensor
U2000H USB Power Sensor measures average power over the frequency range 10 MHz to 18 GHz and power range -50 dBm to +30 dBm.
U2000H USB Power Sensor measures average power over the frequency range 10 MHz to 18 GHz and power range -50 dBm to +30 dBm.
10 MHz – 18 GHz USB Power Sensor
U2000H
U2000H USB Power Sensor measures average power over the frequency range 10 MHz to 18 GHz and power range -50 dBm to +30 dBm.
- Frequency range of 10 MHz to 18 GHz
- Wide dynamic range -50 to +30 dBm
- Internal zeroing capability to eliminate external calibration
- High measurement speed of up to 250 readings/second
- Support internal/external trigger measurements, internal triggering, and trace display
- Compatible with other Keysight instruments
- Your instrument can be controlled at no additional cost using the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). This app simplifies instrument connection and control. Download the BenchVue Basic Power Meter/Sensor App (BV0007B). Note that the basic version does not include KeysightCare support and is one revision behind the licensed version. For access to the latest features and support, the licensed (paid) version of the BenchVue Power Meter/Sensor Control and Analysis App is available.
Internal Triggering and Trace Display Capability
Internal triggering allows triggering based on the burst signal envelope, eliminating the need for an external signal. The trace display provides a graphical view of the signal envelope to assist with gate placement and trigger level setup. All U2000 power sensors, except for the U2004A, feature these capabilities.
10 MHz – 6 GHz USB Power Sensor
U2001H USB power sensor measures average power over the frequency range 10 MHz to 6 GHz and power range -50 dBm to +30 dBm.
U2001H USB power sensor measures average power over the frequency range 10 MHz to 6 GHz and power range -50 dBm to +30 dBm.
10 MHz – 6 GHz USB Power Sensor
U2001H
U2001H USB power sensor measures average power over the frequency range 10 MHz to 6 GHz and power range -50 dBm to +30 dBm.
- Frequency range of 10 MHz to 6 GHz
- Wide dynamic range of -50 to +30 dBm
- Internal zeroing capability to eliminate external calibration
- High measurement speed of up to 250 readings/second
- Support internal/external trigger measurements, internal triggering, and trace display
- Compatible with other Keysight instruments
- Your instrument can be controlled at no additional cost using the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). This app simplifies instrument connection and control. Download the BenchVue Basic Power Meter/Sensor App (BV0007B). Note that the basic version does not include KeysightCare support and is one revision behind the licensed version. For access to the latest features and support, the licensed (paid) version of the BenchVue Power Meter/Sensor Control and Analysis App is available.
Internal Triggering and Trace Display Capability
Internal triggering allows triggering based on the burst signal envelope, eliminating the need for an external signal. The trace display provides a graphical view of the signal envelope to assist with gate placement and trigger level setup. All U2000 power sensors, except for the U2004A, feature these capabilities.
10 MHz to 50 GHz USB Wide Dynamic Range Average Power Sensor
The U2055XA is a fast, accurate and wide dynamic range 10 MHz – 50 GHz USB average power sensor.
The U2055XA is a fast, accurate and wide dynamic range 10 MHz – 50 GHz USB average power sensor.
10 MHz to 50 GHz USB Wide Dynamic Range Average Power Sensor
U2055XA
The U2055XA is a fast, accurate and wide dynamic range 10 MHz – 50 GHz USB average power sensor.
- Frequency range of 10 MHz – 50 GHz
- USB connectivity with a wide dynamic range of -70 to +20 dBm for small signal measurements
- Fast real-time measurement of 50,000 readings/sec
- Real-time measurement with zero dead time to ensure every single continuous pulse is measured
- Average mode time-selectivity function allows full dynamic range for average and time selectivity average power measurements
- Internal zero and automatic calibration save time and reduce measurement uncertainty
- Your instrument can be controlled at no additional cost using the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). This app simplifies instrument connection and control. Note that the basic version does not include KeysightCare support and is one revision behind the licensed version. For access to the latest features and support, the licensed (paid) version of the BenchVue Power Meter/Sensor Control and Analysis App is available.
Accurately measure any modulated signal with the Keysight Technologies, Inc. U/L2050/60 X-Series wide dynamic range power sensors. The USB/LAN connectivity models come with a wide dynamic range, covering -70 to +26 dBm. This sensor offers very accurate and repeatable power measurements for any modulated signal and comes with a super-fast measurement speed of 50,000 readings/sec, which enables higher manufacturing throughput. Users can also save time and reduce measurement uncertainty with the internal zero and calibration function.
Learn more about Keysight LAN and USB Power Sensors
