M903xA Cold Boot Tool

Keysight는 가능한 최신 버전을 사용하는 것을 권장하며, 최신 버전에는 현재 사용 가능한 가장 최신 버그 수정 및 보안 패치가 포함되어 있습니다.
릴리스 날짜 버젼 버전 설명
2021-11-04 1.0 See description below. This tool requires M9037A BIOS version AG12 or greater, M9035A BIOS version KS10 or greater, or M9038A BIOS version KS05 or greater.
릴리스 날짜 버젼
2021-11-04 1.0
Version Description
See description below. This tool requires M9037A BIOS version AG12 or greater, M9035A BIOS version KS10 or greater, or M9038A BIOS version KS05 or greater.
  • This tool allows the system to power down and reboot itself to Windows after ~4-second intervals. A normal restart would just reboot without shutting down the controller.
  • This feature allows modules in the system to load the firmware and reboot after that.
  • Note that this setting is a one-time deal. Controller will behave/back to normal on the next restart unless tool is executed again.

 

다운로드 방법

  • Click the download button

설치 방법

  1. Download and unzip the ColdBoot.zip file.
  2. As administrator, run the cpwresetCtrl64.exe file.
  3. When the command prompt shows up, enter “1” and press ENTER. The feature will be enabled.
  4. Note that this setting is a onetime deal. User will have to repeat the steps if they wish to enable it after chassis is power cycled.

라이센스

  • Does Not Require a License
Download

Installs on: Instrument 

운영 체제

  • Windows 10 (64 bit)

 

선결 조건

지원되는 계측기

  • M9037A
  • M9035A
  • M9038A

관련링크

사용 가능한 소프트웨어 버전이 없습니다.
SHOW MORE