M903xA Cold Boot Tool

A Keysight recomenda usar a versão mais atual, que inclui as correções de bugs e arquivos de segurança mais atualizados disponíveis.
Data de lançamento Versão Descrição da Versão
2021-11-04 1.0 See description below. This tool requires M9037A BIOS version AG12 or greater, M9035A BIOS version KS10 or greater, or M9038A BIOS version KS05 or greater.
Data de lançamento Versão
2021-11-04 1.0
Version Description
See description below. This tool requires M9037A BIOS version AG12 or greater, M9035A BIOS version KS10 or greater, or M9038A BIOS version KS05 or greater.
  • This tool allows the system to power down and reboot itself to Windows after ~4-second intervals. A normal restart would just reboot without shutting down the controller.
  • This feature allows modules in the system to load the firmware and reboot after that.
  • Note that this setting is a one-time deal. Controller will behave/back to normal on the next restart unless tool is executed again.

 

Como Baixar

  • Click the download button

Como Instalar

  1. Download and unzip the ColdBoot.zip file.
  2. As administrator, run the cpwresetCtrl64.exe file.
  3. When the command prompt shows up, enter “1” and press ENTER. The feature will be enabled.
  4. Note that this setting is a onetime deal. User will have to repeat the steps if they wish to enable it after chassis is power cycled.

Licenciamento

  • Does Not Require a License
Download

Installs on: Instrument 

Sistema Operacional

  • Windows 10 (64 bit)

 

Pré-requisitos

Instrumentos Compatíveis

  • M9037A
  • M9035A
  • M9038A

Links relacionados

Não há versão de software disponível
SHOW MORE