Accessories

• x1 connector to match up with the M9045B
• x8 connector to match up with M9502A, M9505A, or M9021A
• 2.0m length

The Y1200B PCIe cable is used with the M9045B to connect an M9502A/M9505A AXIe chassis or M9018A PXIe Chassis with M9021A cable interface to a laptop computer.

MultiGBASE-T1 Media Converter

The Keysight APM2000E enables you to convert the Ethernet physical layer from MultiGBASE-T1 to MultiGBASE-T.  

• Utilizes the Marvel MV-Q3244 PHY for the 2.5/5/10GBASE-T1 physical layer.
• Compliant with OPEN Alliance’s TC10 Automotive Ethernet Sleep/Wake-up requirements. 
• Intuitive LED indicators:
  • PHY configuration, link status, and network activity 
  • Bar graph display of MultiGBASE-T1 Signal Quality Indicator (SQI) in real-time 
• Membrane buttons enable device configuration without software: 
  • Switch between 2.5G, 5G, and 10G link speeds 
  • Select the MultiGBASE-T1 PHY clock configuration 
• The converter uses the H-MTD connection system designed for MultiGBASE-T1.
• Ruggedized USB Type-C connector for device configuration and firmware updates. 
• Order APM2000E-CLK for external clock input. 

The APM2000E media converter is required for Automotive Ethernet MultiGBASE-T1 receiver testing with Keysight AE6920R software.   

Use with the following solution: AE6000R.

• Single-slot module
  
• Installed in empty slots to ensure proper airflow in the AXIe chassis

In order to ensure proper airflow and cooling in an AXIe chassis, filler modules must be installed in empty slots. The Y1221A AXIe filler module is one-slot wide and is included with the M9502A and M9505A AXIe Chassis. The Y1221A must be ordered separately with the M9514A chassis.

Applications

• Transportable applications (can also be rack-mounted)

Functionality

• 2 slots for AXIe instrument modules
• Embedded AXIe system module
• High Power, 200W Cooling per slot

Performance characteristics

• Gigabit LAN connection to each module slot
• Gen 2 PCIe x8 interface to system controller provide up to a 4 GB/s data rate from external controller
• Gen 2 PCIe x4 links to each module slot (maximum 2 GB/s data rate)

The M9502A AXIe Chassis is fully compatible with the AXIe 1.0 specification. It includes an embedded system module (ESM) that does not take up an instrument slot. This system module performs the chassis management functions contained in the AXIe specification. Additionally, it provides PCI and LAN interfaces for connection to an external computer, external clock and trigger connectors, and Keysight-exclusive, inter-chassis synchronization connectors. The local bus implemented in the M9502A provides the maximum 62 pairs allowed by the AXIe specification. Combine the M9502A with the M9048A PCIe Desktop Adaptor to achieve the highest system bandwidth.

The M9502A is perfect for transportable applications that require the higher performance of AXIe. It can also be installed in a rack and the instrument modules slots are arranged horizontally to minimize rack space. This arrangement combined with a high-performance cooling system allows the chassis to be racked in only 2U of space. The M9502A is also designed to be easily maintained as both the power supply and fan tray can be removed while the chassis remains in the rack.

• Rack cabinet: System II or System II Plus

The Keysight DAQA190A/1CM124A rackmount kit is designed for use with only one instrument, mounted on either the left or the right side of the rack. The kit includes one rack flange and one half-rack width filler panel, 4 screws to attach the instrument, 4 rack screws with nuts and installation instructions in English.

The Keysight DAQA190A/1CM124A is compatible with the Keysight DAQ970A, DAQ973A, 34970A, and 34972A data acquisition systems, the Keysight 34460A, 34461A, 34465A, 34470A, and 34420A DMMs, the Keysight 33500B and 33600A series function generators.

For more information about DAQ, please visit Keysight data acquisition - daq page.

Learn more about Data Acquisition Accessories and Options

• Rack Cabinet: System II or System II Plus works with the 34401A, 34420A, 34970A, 53131A, 53132A, 53181A, 33220A, 33250A and most other 2-slot, half rack sized Keysight products.

The Keysight 34191A (5063-9212) dual rackmount flange kit secures the instrument to the front of the System II cabinet. This kit can be used with the 34194A Dual Lock Link Kit to mount two Keysight System II (half-width, 2U height - 88.1mm) instruments side-by-side.

The Keysight 34191A dual rackmount flange kit is compatible with the Keysight 34460A, 34461A, 34401A, 34410A, 34411A, and 34420A DMMs, the Keysight 34970A/34972A Data Acquisition/Switch Units, the Keysight 531xxA and 53200 Series frequency counters, the Keysight 33120A, 33220/250A and 33521A/33522A, and 33500B series function generators, most E3600 power supplies and other 2-slot, half rack sized Keysight products.

For more information about Keysight rack mount kits, please visit rack mount kits and components.

Learn more about Data Acquisition Accessories and Options

• Size: 11 inches x 8 inches x 1½ inches
• Material: Cordura^®
• Closure: zipper
• Attachment: nylon straps wrap around instrument with velcro closures

The Keysight 34161A Cordura® pouch fits on top of the Keysight 34401A and 34420A multimeters, as well as the 34970A and 34972A Data Acquisition/Switch Unit. Its dual zippered compartments can hold manuals, power cords and other accessories. It will fit most 2-slot, half rack sized Keysight instruments.

The Keysight 34161A is compatible with the Keysight 34401A and 34420A DMMs, the Keysight 34970A Data Acquisition/Switch Unit, the Keysight 33120A and 33250A sources, the Keysight 53131A, 53132A and 53181A counters, most E3600 power supplies and other 2-slot, half rack sized Keysight products.

Learn more about Data Acquisition Accessories and Options

Keysight offer variety of accessories for digital multimeters, learn more about Keysight new digital multimeter accessories

• Size: 9 inches x 8 inches x 1½ inches
• Material: Cordura^®
• Closure: zipper
• Attachment: nylon straps wrap around instrument with velcro closures

The Keysight 34162A Cordura^® pouch fits on top of the Keysight 34460A, 34461A, 34401A, 33210A and 33220A Function / Arbitrary Waveform Generators and the 34405A, 34410A and 34411A Digital Multimeters. Its dual zippered compartments can hold manuals, power cords and other accessories. It will fit most 2-slot, half rack sized Keysight instruments.

Keysight offer variety of accessories for digital multimeters, learn more about Keysight new digital multimeter accessories
 

• x8 connectors to match up with Keysight AXIe and PXIe chassis and System Modules.
• Up to PCIe Gen 3 operation
• 2.0 m length

The Y1202A PCIe cable is primarily used to connect a PXIe or AXIe chassis to a desktop or rack-mount computer. Hence, it is the perfect companion to the Keysight M9048A, M9048B, and M9049A.

• Rack cabinet: System II or System II Plus

The Keysight DAQA191A /1CM107A dual rackmount flange kit secures the instrument to the front of the System II cabinet. This kit can be used with the DAQA194A Dual Lock Link Kit to mount two Keysight System II (half-width, 2U height - 88.1mm) instruments side-by-side.

The Keysight DAQA191A/1CM107A is compatible with the Keysight DAQ970A, DAQ973A, 34970A, and 34972A data acquisition systems, the Keysight 34460A, 34461A, 34465A, 34470A, and 34420A DMMs, the Keysight 33500B and 33600A series function generators.

For more information about DAQ, please visit Keysight data acquisition.

• Easy connection – plug-and-play interface
• USB 2.0 interface (USB 1.1 compatible) and IEEE-488 interface (connect up to 14 GPIB instruments)
• High-speed - transfer over 1.15MB/sec
• Parallel Polling (check response of up to 8 devices at one single poll)
• Standard industry libraries with Keysight IO Libraries Suite

The Keysight 82357B USB/GPIB Interface provides a direct connection from a USB port on your laptop or desktop PC to GPIB instruments. There are no switches to set, no PC cards to install, and no external power supplies required. Getting connected has never been easier.

Want to see more? See Video Demo

To quickly establish instrument connection on a PC, download and install Keysight IO Libraries Suite

Automate and perform data analysis on your test system easily with Keysight VEE Pro

Counterfeits of this or closely related products have been found in the market. To ensure you are purchasing an authentic Keysight product with the quality and performance you expect, purchase through Keysight authorized distribution partners. Click on the “How to Buy or Rent” button, above, to find authorized distribution partners. 

Learn more about Data Acquisition Accessories and Options and GPIB Products and Cables

 

• Output Transition Time: 150 ps
• 3 dB point: 2.1 GHz
• Input voltage: <10 Vpp
• Insertion loss: <0.2 dB
• Overshoot, ringing: <3%
• Mech. dimensions (L x W x H in mm): 43 x 28 x 15

The new design of these transition time converters ensures very low signal reflection far beyond the 3 dB point, unlike conventional converters.

Reducing the signal transition-times also increases the overall pulse-performance for overshoot/reflection sensitive applications.

The converters are fitted with SMA connectors, one male, one female.

These converters have been designed to convert the fixed transition-times of the Keysight 81133/4A 3.35GHz pulse pattern generator (< 100 ps transitions) to slower, fixed transition-times (150 ps, 250 ps, 500 ps, 1 ns, 2 ns) hence reducing the signal bandwidth. All transition-times are from 10% to 90% of amplitude.

The transition time converters can be cascaded to get transitions which are intermediate values equal to the square root of the sum of the values squared.

The converters can be used with the following products, too:

• 81130A with 81131A 400 MHz pulse/pattern generator (800/1600 ps transitions)
• 81130A with 81132A 660 MHz pulse/data generator (<500 ps transitions)
• 81250 Parallel Bit Error Ratio Tester
• 81133/4A 3.35GHz pulse pattern generator (< 100 ps transitions)

For complete details, click on the TTC Datasheet link.