Accessories

• An electrode (diameter: 50mm) can satisfy various insulation measurement standards such as ASTM D-257
• Triaxial input terminal configuration minimizes the influences due to external noise and as a result, high resistance up to 10 POhm can be measured accurately
• A built-in interlock circuit enables safe high voltage measurements
   

The N1424A is designed to operate specifically with the B2985A/87A Electrometer/High Resistance Meter. It is used to measure surface or volume resistance/resistivity of insulation materials. The N1413A High Resistance Meter Fixture Adapter is required to connect the N1424A to the B2985A/87A.

Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.

• Electrodes (diameter: 26/50mm) can satisfy various insulation measurement standards such as ASTM D-257
• Triaxial input terminal configuration minimizes the influences due to external noise and as a result, high resistance up to 10 POhm can be measured accurately
• A built-in interlock circuit enables safe high voltage measurements
   

The N1424B is designed to operate specifically with the B2985A/87A Electrometer/High Resistance Meter. It is used to measure surface or volume resistance/resistivity of insulation materials. The N1413A High Resistance Meter Fixture Adapter is required to connect the N1424B to the B2985A/87A.

Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.

• Electrodes (diameter: 26/50/76mm) can satisfy various insulation measurement standards such as ASTM D-257
• Triaxial input terminal configuration minimizes the influences due to external noise and as a result, high resistance up to 10 POhm can be measured accurately
• A built-in interlock circuit enables safe high voltage measurements

The N1424C is designed to operate specifically with the B2985A/87A Electrometer/High Resistance Meter. It is used to measure surface or volume resistance/resistivity of insulation materials. The N1413A High Resistance Meter Fixture Adapter is required to connect the N1424C to the B2985A/87A.

Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.

The 42030A is a standard resistor set consisting of nine precision resistor standards which range from 1 mΩ to 100 kΩ. These resistors are primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers. Refer to the instrument's operation/service manual for the method of using these standards.

Learn more about LCR Meter & Impedance Measurement Product Accessories

• Current range: 15 A continuous
• Maximum current: 30 A for 15 minutes maximum
• Maximum voltage: 30 Vac and 60 Vdc
• Accuracy: 0 .3% from dc to 1 kHz
• Accuracy: 5% from 1 kHz to 5 kHz at 10A
• Termination: dual banana plugs

The Keysight 34330A current shunt is a precision 0.001 ohm resistor housed in a plastic case surrounded by epoxy. Output is 1mV per A of current passing through the shunt. The current to be measured is connected to the shunt via binding posts.

The Keysight 34330A is compatible with the Keysight 34460A, 34461A, 34401A, 34405A, 34410A, 34411A, L4411A and 3458A DMMs.

For more information about Keysight test leads and probes for multimeters, please visit Multimeter Test Leads and Probes.

• 100 GΩ resistor for the resistance measurement evaluation
• Interlock connector for over 21 V bias
• Convenient additional coaxial and triaxial connectors for termination

The N1422A contains a 100 GΩ resistor to evaluate high resistance measurement capability of the B2985A and B2987A. Using an external voltage source, you can evaluate current measurement of the B2981A and B2983A Femto/Picoammeters as well. In addition it has coaxial and triaxial connectors to simply terminate the cables for a wide variety of evaluation.

Learn more about Keysight B2980A Series Femtometer / Picoammeters and Electrometers / High Resistance Meters.

• 0201/0402 Size DUT
• DC to 3 GHz
• Maximum voltage: ±40V peak max. (AC+DC)
• Temperature: -55 to 85 ^oC

The 16198A is designed for impedance evaluations of bottom electrode SMDs. It achieves stable frequency characteristics up to 3 GHz and provides highly repeatable measurements. The Keysight 16198A supports very small SMD sizes, 0201 (mm) and 0402 (mm).

Learn more about Keysight LCR Meter & Impedance Measurement Product Accessories

 

The 16192A test fixture is designed for impedance evaluations of side electrode SMD components. The minimum SMD size that this fixture is adapted to evaluate is 1(L)[mm].

• SMD Test Fixture Selection Table

The 16196A surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results - reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement - now with the 16196 series, it’s easy to perform accurate and repeatable measurements.

The 16196B surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results, reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement. Now with the 16196 series, it’s easy to perform accurate and repeatable measurements.

• SMD Test Fixture Selection Table

The 16196C surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results - reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement - now with the 16196 series, it’s easy to perform accurate and repeatable measurements.

Learn more about Keysight LCR Meter & Impedance Measurement Product Accessories
 

• SMD Test Fixture Selection Table

The 16196D surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results – reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement – now with the 16196 series, it’s easy to perform accurate and repeatable measurements.

Learn more about Keysight LCR Meter & Impedance Measurement Product Accessories