What are you looking for?
Suggested searches
No product matches found - System Exception
Matched content
Module Firmware Upgrade Program
IMPORTANT: The Module Update Program is required for all module updates.
You can upgrade Keysight module firmware via GPIB. In some cases, LAN or a serial null-modem cable connection can also be used.
Requirements:
- PC running Windows operating system.
- To update via GPIB the PC must be fitted with a suitable interface card or adapter.
- Alternatively, a serial null-modem cable is required, such as is supplied with your Keysight Lightwave mainframe.
Download and extract "ModuleUpdate.exe" to a directory on your PC's hard drive, then execute Module_Update.exe to install the module update program.
The readme.htm file asssociated with the module update program contains:
- Notification of prerequisites,
- Notification of known issues,
- as well as detailed instructions for use.
Be sure to study this file before attempting to use the module update software.
This program is used to load firmware from files selected for the corresponding instruments from this page: www.keysight.com/find/octfirmware
Keysight는 가능한 최신 버전을 사용하는 것을 권장하며, 최신 버전에는 현재 사용 가능한 가장 최신 버그 수정 및 보안 패치가 포함되어 있습니다.
릴리스 날짜 | 버젼 | 버전 설명 |
---|---|---|
2009-01-01 | 2.4.0 | Optical Component Test Module Update Program |
릴리스 날짜 | 버젼 |
---|---|
2009-01-01 | 2.4.0 |
Version Description |
---|
Optical Component Test Module Update Program |
다운로드 방법
See Above
설치 방법
See Above
라이센스
- Does Not Require a License
지원 문서
사용 가능한 소프트웨어 버전이 없습니다.
SHOW MORE